Форум поддержки Thunderbird

In my left tool bar I have:

xxxx@cox.net pop server followed by about 40 folders. This was the Cox email that is no longer in use.

xxxx@gmail.com followed by folders

xxxx@cox.net this is the new imap cox.net using yahoo.

Is it possible to move the bottom cox.net to the top, followed by gmail, followed by the no longer in use pop cox.net?

Thanks

According to Help>About Thubderbird the current version is 115. But searches in my browser tells me the latest version is 105.

Am I not searching deep enough?

Thanks, James

Hi, I am looking for some help. I am using Windows 10, Comcast internet, and a VPN. I get error message when my VPN is on saying that my IP Address has bee blacklisted and I can not send or receive emails using Thunderbird. I also get an error within Thunderbird. My VPN Service says its either Comcast or Thunderbird. Been working with Comcast on the issue. Could it be a Thunderbird issue? My VPN Service says to reinstall Thunderbird but no guaranties that will help. Please let me know if there are any solutions I can try. Otherwise I may need to pay more for a dedicated IP Address. Thanks Marc

Hi! I have trouble setting the date format in the emails list. It should be the UK format as per the setting selection, however it is showing the American format. I am using Linux Mint and timedatectl says Time zone: Europe/London (BST, +0100)

I have attached screenshots. Please let me know what am I missing. Thank you.

I recently had to change my email address to a gmail account. I want to continue to use Tb but don't want copies kept on the Gmail account. Is there a way to delete the messages in Gmail without deleting them in Tb.

Is there a way I can make a filter that responds to the displayed sender (which may be different from the address)? For instance if an email has the header “From: "John Doe" <john.doe@example.org>”, can I make a filter check if “John Doe” matches a pattern?

Been using Outlook, but am having issues. Decided to try TBird. Got the email part set up (far as I can tell). Calendar and Address book are a different story. Calendar: Using Google Calendar as primary calendar. Consists of an appointment, birthday, and holiday calendars. Created a new calendar and entered the URL for my Google Calendar. It showed up in TBird apparently OK. Created ANOTHER calendar and entered URL for Googles stock Holiday calendar. It also seemed to show up OK. Tried to do what I did with those calendars to add my Birthday Calendar, but Google uses data from Google Contacts to create that calendar. Can't figure how to add that data. HELP? Address book: Exported Google Contacts Data to a CSV file. Tried BOTH Outlook CSV and Google CSV exports. NEITHER produced a CSV file ANYWHERE Close to what TBird appeared to want, based on what showed up on the "fields" page that appeared after I chose the CSV filename. Moving data around in a spreadsheet is a Royal pain. Isn't there a Google Contacts CSV export file that more closely approximates the arrangement that TBird WANTS?

The inbox had about 18 months worth of emails. I deleted three emails that had been flagged by Thunderbird as spam. Then I went to the trash folder and permanently deleted the trash that included many other unwanted emails.

When I returned to the inbox, the full list of emails was present but after clicking on any email there was no email content shown. A new email came in and the content was shown for that email.

The sent folder still shows all the sent emails.

After looking for solutions on the web, I selected the inbox, right clicked and opened properties. I then selected "Repair Folder". Now, the only email shown in the list is the new email that came in after the issues started.

I have looked for crash reports and it says there are no crash reports.

Suggestions....? Thank you, Peter

When I want to print an email I want the body of the email and I do not want the header information. How do I remove this unwanted script at the top of the email? I have tried ticking and unticking the tick-box for headers and footers in the print dialog to no avail. This question has been asked before but was archived.

Since the latest upgrade to 115.10.1 (64-bit) I have an issue about running Thunderbird.

From a clean Windows 11 start up it is OK but then if I then Exit and then try to run the bird again it does not start.

Digging around I discovered using Task Manager, a number of Thunderbird processes run after I had Exited. See attached.

Any thoughts?

Hi.

I've just installed the latest version of Thunderbird on a clean copy of Windows 11.

Thunderbird comes up with no buttons across the top (Get Messages, Write, Print, Address Book, etc).

I can't see an option for displaying them.

Any suggestions please?

Thanks, Dave.

There are two "bad email" files in Thunderbird: JUNK and SPAM. I'm still not clear on the difference.

For JUNK mail, TB gives us the option to select "NOT JUNK". Good.

But for SPAM, I cannot find the option "NOT SPAM"

1) Why are there separate SPAM and JUNK directories? And why are they managed differently? This seems terribly non-intuitive and inconsistent and just strange.

2) How can I train SPAM filter to not flag good email from trusted senders? For instance, I get email from my wife many times a day for many years. Today, TB put her email into SPAM. Isn't there a simple command to "white list" a sender's email address?

I am setting up a new Windows 11 Computer and am trying to install Thunderbird. I have downloaded TB (Thunderbird Setup 115.10.2) to my Download Folder. I double click on that file to run the Setup program, complete the user account information and TB and select Continue. TB completes the search and displays the correct account (att.net) connection information, SMP, POP3, Ports, etc. I select DONE and the Checking Password box displays. It runs for a few minutes and an Error message displays: "Unable to log in at server. Probably wrong configuration, user name or password." If I select Configure Manually, a window displays showing the correct configuration information (I have checked it four times). I will note that "Normal Password" has been selected for Authentication Method in case that is important. I have tried this method several times and get the same Error message. Any help will be greatly appreciated. Thank you.

I have attached a screenshot of the configuration window. Note: My account is with att.net but I am still using my old pacbell.net account that was merged with ATT many years ago.

I am running Thunderbird 115.9.0 on Lubuntu 23.10. I have 4 IMAP accounts I use. The folder and file is not shared and I am the only account with access to the directory.

I use emoji as tags for messages, and have a large number of filter rules defined, nearly all of them Tag a message and set the Junk Status to `Not Junk`. These rules are all set to execute `Manually` or on `Getting New Mail`.

If I select a given inbox folder for a mailbox and select `Tools` > `Run Filters on Folder`, all of the messages are properly tagged, however, after some time (10m?, On new mail receipt?) at least one of my mailboxes will lose all of the tags that were previously set for messages. Manually running the filters will restore the tags, until they disappear again some time later.

I've not seen anything in the Browser Console log (but perhaps I'm not using the right term?) Is there any way I can diagnose or fix this issue? Thanks!

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

Cox.net is transitioning from in-house e-mail to e-mail handled by Yahoo.com. Our cox.net addresses are supposed to (and apparently have) transitioned so that they still work, but are processed through pop.mail.yahoo.com.

It is my turn to be transitioned and I have been successful in doing so to the extent that I can send and receive using my address(es) ...@cox.net through Yahoo web mail and on my Samsung phone. I have not, however, been successful in either sending or receiving mail using Thunderbird on my desktop.

I have been successfully using Thunderbird with POP settings for years with four different cox.net addresses. [I'm currently just trying to get two of them working -- unsuccessfully.]

I am using Windows 10 on a Dell desktop. I am using Thunderbird 115.9.0 (32 bit). I have reset the POP and SMTP settings as directed by Yahoo. One of the errors I receive is: "Error with Account .... Sending of password for ...@cox.net did not succeed. Mail server pop.mail.yahoo.com responded (SYS/TEMP) Server Error - Please try again later." It then asks me to retry or enter a new password. I have checked the passwords saved by Thunderbird and they are correct.

I suspect, that with all the Cox accounts being newly routed through Yahoo servers that I am not the only Thunderbird user experiencing this problem. Does anyone have any suggestions? Is it likely to help if I uninstall and reinstall Thunderbird? Would I loose all my mail, etc. if I did that? [I did the delete and add account in my phone and that was successful, but I wasn't concerned about losing mail there as it is all on my desktop.]

Thanks in advance. billb1111

when I try to send an email you ask for a pass word for jojack@dslextreme which I havent had for years

2

2

Ubuntu 22.04, TB 115.10.0 (64-bit). A system update occurred recently, and TB was in the list to upgrade. Now, TB transacts email & such w/o problem. However, when I use the window exit ('X' upper right corner) or the File ->Quit choice, a status bar shows "Clearing Trash" or the like, and remains on the desktop. Eventually a system message appears that TB is not responding (wait or force quit). Nothing happens until force quit is used.

Same behavior screen is seen if I try to use the TB troubleshooting menu option.

Any suggestions how to diagnose this? Thx.

TB no longer will start. It just hangs and when I go to it on my Mac I see a spinning disk. That never changes and eventually, after hours, I must force quit and report it to Apple. I receive no messages or error codes.