Форум поддержки Thunderbird

Thunderbird - Problem

My email address is: finnvebirk@webspeed.dk (alias: evab@webspeed.dk ) I have used Thunderbird email for many years. I have archive folders with more than 50 folders and sub-folders. Overall, I have several thousand emails in my archive folders.

After I wanted to create a sub-folder and move it to another location, the following has happened: All my folders and sub-folders are mixed together and arranged in a changed order. All emails in my archive folders and sub-folders have disappeared - all folders are completely empty. I think maybe a folder called 'Local folders' has disappeared. It is no longer possible to move emails from the Inbox to the empty folders. NOTE: Inbox, Sent and Trash still works.

Question-1: What happened ? What can I do ? Can I recover all my emails in the archive folders ?

Question-2: Can I restore my Thunderbird mail system as it was, e.g. 2 weeks ago ?

Question-3: As an emergency plan (if all my emails are lost !): Can I reset Thunderbird without deleting mails in Inbox, Sent and Trash ? If Yes – How do I do that ?

Running Thunderbird 115.10.1 on Mac OS Catalina 10.15.7. Mail stopped communicating. Tried using the "Access Account Setup" for existing Email. Put in full name, email address and password and clicked continue to have Thunderbird configure the settings automatically. Did not work with auto settings (POP3). Went back to "Access Account Setup" for Existing Email and instead of clicking continue, I selected "Configure manually". Tried putting in the IMAP protocols and correct port settings, but the "Done" button is grayed out. I am at a loss of what to do to get my email back up and running and at the same time don't want to lose and emails/folders that are currently set up. Any help would be great.

Thanks

I have several email accounts; and they are all set up the same way on Firefox, and I have checked that that is so. But on one of the email accounts the "sent" file is missing. I have checked the "place copy in Sent..." In the subscription list "sent" does not show up for this account

Do you need more info ?

What can I do / check ?

Thanks, Dieter

Anytime I attempt to send an email in the CCC ONE application, I get this error message from CCC ONE:

"Unable to perform selected action while the email application is open. Please close your email application and try again."

This error message persists whether I do have Thunderbird open or not. I also checked Task manager while I had Thunderbird closed and found no instance of it running. Is there any way that Thunderbird is running in the background? Or could it be if Thunderbird loads at start up that it's tricking CCC into thinking it's open all the time?

I contacted CCC ONE report and they advised me to attempt to change the name of a DLL file so a new one would be created to replace it. I tried that, the issue still persists. They also told me to try and uninstall and reinstall Thunderbird, which I did, and it still won't work.

Any ideas on how to fix this?

• Attached is a photo of the error

in the contact field, how do i change the name of a contact field like custom properties or organizational properties to something else? i do not know how to add an image! So, go to address book, new contact, and you will see the fields custom properties and organizational properties towards the bottom.....Thank you...b³

When I start T'bird in normal mode, I get what you see in picture #1. Notice the custom menu bar at the top. I can still receive emails into the Inbox (but can't see or access them), and I can write an email, access the Address Book, Calendar, etc.

When I then start in Safe mode, with Shift key down, I get what you see in Picture #2. Notice that the custom menu bar at the top is gone. I have to recreate it every time I shut down and restart T'bird. That is unacceptable.

Please advise what I should do to correct this situation. If I can't, then I'm through with Thunderbird (after some 15+ years).

Many thanks, Robert Hawkins

Good afternoon to all.

I use Message Filters to automatically send certain emails to two specific folders upon receipt, based on some defined rules (mainly who the sender is). Yesterday, I accidentally clicked "Run Filters on Folder", and the actions for my filter rules ran on every folder in my account, including my Archive folder. I could not find a way to stop the action once it started, so hundreds of archived emails were pulled out of the Archive folder and repopulated into my two specified folders. In each of these specified folders, I had a handful of emails stored in order to be able to come back to them as reference or to deal with later; I remember what some of these emails were, but I don't necessarily remember all of them, and now they're mixed in with the hundreds of emails that were brought back from the archive.

So, I have two main questions:

1. How can I prevent this from ever happening again? Is there a way that I can tell the message filters that a filter should never be run on archived messages?

2. Is there a way I can "undo"/reverse what happened, so that the previously-archived emails are sent back to the Archive? Or is there at least a way to identify which emails were in the two specified folders before they were inundated with all the messages from the Archive?

Thank you.

A: All these problems started after the new email version was installed, in-other-words, when the old version was updated! B: All of my email that was in my account / on my computer seem to be be there as far as I can tell. I can get to them, I can open them and see their contents. C: All is ok up til this point...as mentioned above and no new email has arrived. D: Now, as soon as I click on the "Get Messages" (Icon, looks like a cloud) in the upper left corner, is when I the Yahoo page of some sort pops on the screen, that's it. No mail arrives and I'm stuck with the Yahoo page covering most of the screen. E: I can click click around and try entering my email address but when I click on F: I see that images can be attached, and hope it works. My screen are,1920 x 1080, so I'll try and reduce the size of the images when I attach them. G: (Image A) After I inter my email address the red wording pops up.

    (Image B)   My email address pops up. That's it. Sometimes, If I click around a second page will pop up and

it becomes vicious circle and normally going back to the first page. (Note: A image) [about:blank] ??? Other pages have an address??? H. In these 4 days I have changed, added, deleted, used my Mozilla Reset Key, and this morning, per Mozilla's - Thunderbird's request, created another Reset key. Still no email. I do believe If this Yahoo thing was gone my email might start, just a guess now. H. Will all of the email that has not arrive still be available?? I. Almost forgot to mention. I receive and send my email through Thunderbird, and Yahoo & AT&T. Thanks, Bob Miller And, "Yes" please email or call, anytime day or night. I am getting a few emails on my phone. miller.485@sbcglobal.net

P.S...."Somethings Wrong"  :-( Again, thanks for your help!

I updated to 115.10.1 a few days ago and would like to roll back to what I had before.

Is there a way to do that?

And is there a file that has the version number in it? I would like to look in a system backup to find out the version number that I had last week.

I'm currently using Thunderbird version 115.9.0. For the last several months when I detach, delete or save an attachment, Thunderbird will duplicate the email. I then manually delete the duplicate.

This didn't happen the first several years I used Thunderbird. Is there some setting I missed? Any solution to prevent this from happening?

Thanks for any advice.

If I Forward and email with a list of cc: addresses, will the Forwarded emails be sent to the cc: addresses also or do I need to enter a new list of cc: addresses?

I have both Gmail and Aol accounts on my installation, 115.9.0. My aol account is behaving funny. If I choose to display only unread emails, the screen goes blank and no messages show. I then click on sent message, click back on incoming and the messages reappear in the "all" messages display. The Gmail account is just fine, I can click between "All" and "Unread only" with no issues. Can't figure out what's going on.

I'm trying to use Thunderbird to access my work emails directly. They use Outlook Office 365, which I can use the webmail version of just fine, but a year ago they upgraded to Oauth2 and MFA and for the life of me I cannot get any version of Thunderbord to work with it anymore. I can send an email, but I can access any email on the server. Weirder still is the error console message suggest the program thinks I cancelled my password entry;

"Loading failed for the <script> with source “chrome://global/content/netError.js”. neterror:128:4

NS_ERROR_ABORT: User canceled primary password entry"

NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 3 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 Some cookies are misusing the recommended “SameSite“ attribute 5 Not showing popup notification password with the message Save login for microsoftonline.com? browserRequest.js:12:13 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 LoginRecipes: getRecipes: falling back to a synchronous message for: https://cc1.azureauth.duosecurity.com LoginRecipes.jsm:297:11 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 A form was submitted in the windows-1252 encoding which cannot encode all Unicode characters, so user input may get corrupted. To avoid this problem, the page should be changed so that the form is submitted in the UTF-8 encoding either by changing the encoding of the page itself to UTF-8 or by specifying accept-charset=utf-8 on the form element. frameserv-form.js:1:64 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 LoginRecipes: getRecipes: falling back to a synchronous message for: https://api-ce86e224.duosecurity.com LoginRecipes.jsm:297:11 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 3 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 A form was submitted in the windows-1252 encoding which cannot encode all Unicode characters, so user input may get corrupted. To avoid this problem, the page should be changed so that the form is submitted in the UTF-8 encoding either by changing the encoding of the page itself to UTF-8 or by specifying accept-charset=utf-8 on the form element. form-response.js:1:65 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 Loading failed for the <script> with source “chrome://global/content/netError.js”. neterror:128:4 NS_ERROR_ABORT: User canceled primary password entry

how can i stop thunderbird from interacting with windows defender anti virus scan? when ever i download or delete emails i get a few seconds of "not responding " and the whole computer is non responsive. i used to be able to turn off real time scan in security and it would work for a day and then windows would enable it again. now since the last upgrade windows isnt allowing me that option any more. solutions?

Your response to: no calendar tab after installing lightning

"Not sure what you installed and why. The Lightning add-on is no more. The calendar has been integrated into Thunderbird since quite a while. There is no need to install an add-on. "

So if Lightning is no longer valid - please remove old references to it!! How do I get the old plain calendar tab on????

Process is below: 1. I can successfully navigate to add-ins and choose and add-in to download 2. I can successfully click Add to Thunderbird 3. The screen in the attachment below is shown 4. I cannot get past this screen. If i click Add nothing happens and Thunderbird eventually shuts down.

I am using Debian Linux in a virual env on chromebook currently on version 115.10.1 (64-bit) of thunderbird.

Need to be able to download TBSYNC and the appropriate add-ins to get caldav and Exchange active sync to work. PLEASE HELP :)

Hello,

I have just imported my old email from Outlook to TB Local Folders. Everything works out except some of the email (not all) show a wrong date in the email list. The date show a future date like 2/7/2101, 6:28 AM. Please check the attached image. Any idea?