Форум поддержки Thunderbird

Hey there Team!

So I flipped my table because of the new Outlook update and I'm beyond frustrated.

Not only it does not show the unread email count but also stopped working for my work email, making me miss a serious meeting!

This is ridiculous!

So now I'm transitioning to Thunderbird however, my Inbox is showing the total amount of emails. This is not what I need. What I need is the unread amount of emails.

On top of this, if I minimize the email, the Inbox amount count merges with the amount count of Sent Items. This is not what I need either... What I need is to solely have the amount of unread emails.

How can I achieve solely unread email count with Thunderbird?

Please keep me posted as I'm losing my last screw over setting up something as basic as this. -Val

I created my email signature and saved it as an HTML file. When I add it in my account settings, it displays the logo I have as a blank box. It also adds extra spacing in between each line. How do I get it to display the way I saved it?

I normally open messages in tabs under exactly one circumstance: when I right-click on a message and explicitly open it in a tab.

I've found that (until I changed the handling of PDFs to "Save file") any PDFs that opened using Thunderbird's preview function would reopen if I closed and relaunched Thunderbird. This is not desired behavior.

I will also note that if I open Settings, it opens in a tab, rather than a separate window. This is neither expected nor desired (and my natural reaction is to click the close button on the window, closing Thunderbird, because "Settings" is something I expect to be in a window, not a tab. And that, too, reopens if I reopen Thunderbird.

And worst of all, those tabs that shouldn't be reopening at all are reopening in front of the main tab.

There was an extension called "Thunderbird-DontRestoreTabs," that would do exactly what I want, but that was made obsolete when the underlying extension technology was deprecated, so it is of no use in 115.9.0.

Good afternoon to all.

I use Message Filters to automatically send certain emails to two specific folders upon receipt, based on some defined rules (mainly who the sender is). Yesterday, I accidentally clicked "Run Filters on Folder", and the actions for my filter rules ran on every folder in my account, including my Archive folder. I could not find a way to stop the action once it started, so hundreds of archived emails were pulled out of the Archive folder and repopulated into my two specified folders. In each of these specified folders, I had a handful of emails stored in order to be able to come back to them as reference or to deal with later; I remember what some of these emails were, but I don't necessarily remember all of them, and now they're mixed in with the hundreds of emails that were brought back from the archive.

So, I have two main questions:

1. How can I prevent this from ever happening again? Is there a way that I can tell the message filters that a filter should never be run on archived messages?

2. Is there a way I can "undo"/reverse what happened, so that the previously-archived emails are sent back to the Archive? Or is there at least a way to identify which emails were in the two specified folders before they were inundated with all the messages from the Archive?

Thank you.

When I import the attached .asc file, the following error shown

The .asc file contains following public key

mQENBF3L5E8BCAC3h/kouKVGE46c281kh8iZ5gL6phAPdxpvOsOupHTHeU9VWQLo V+gwh2XEIk/FSucWakM5K+AdWTbEFFKQqHLbIIDognL1raNGCcMtZsmjtcebz2aG /ZM2Xg1aAJ+3Swe9CNLTKl3RY+7ilE6D7LlzbY5oKsxMSbHMABjJtzOIaWL6mneo hPyu3XFn9NeVpcHMgKLEM143veT0n2mkTOo3XGuuh0hFPdQ+Gxhe/R9s0ds9XsNW cFcdRwCim+0OnDXR+JknEgTONwp0lTtJqQpAlnivKmSAz0mrhVpSl4zy8LgJPxYN d9z71m01MQ4uOqADOWQ9tL3o5Ok8YS4LCk41ABEBAAG0FXRzZ2V4ZXJjaXNlQGdt YWlsLmNvbYkBTgQTAQgAOBYhBLqW6k1qmINPLzkEB1N69wgEzHoqBQJdy+RPAhsD BQsJCAcCBhUICQoLAgQWAgMBAh4BAheAAAoJEFN69wgEzHoqtYoH/39qFvrMDu8V ml0AMFjmOTWBJECJ3hG9aizkG27XAa35mbPl5XTEbnP/ZBplT3zeCedOdRJnVaBi AzC/c2hfcz6Jwl8c5rWiSIENllyZaVBV0vKGynoV8v8fnDs7/yUYw9pTBeZ5enVI wPVYN2bOfP9m3k6o7bH5bHIrlJL9JBmX1f6aqGdvGzlbzvUapGSpKmamK5UNdG7z O0nEkCJQDewgtyoBPYljDr39nnvWXS0nB0JmcuAL+vChstnz3l5ftVVmEgX0dxn4 GPpRRANuLAKW/HtAPLoHtVHq/ESOc9PzZInqxKuJ8HU5P2/b9u7q3zVTCA+xld1P q9YeW5m8vb+5AQ0EXcvkTwEIALcz826oKUKIwvAJflffudE1K1ZHeOLK/gR0009S XZPcVDd5R3fnNDmbJWQY+NZd0frtzFSUd+2Cl6Cc7imOBeWsq7KzmUEk/gDsSyy+ qmgUwJ2q360Fd9eGxVOpjkoRfBD8lKXek187yFKdVar1z7ZDm3N231bTl853FFYE f220qe28DHVUzLJ6L0PwbNTg/VgC8Yal0DzyiL3qBNHRNSdVHlTUxIhd5rmbODS5 Dm81XWj1a2YrLdJa5ASf8GztqXjtR9FO+v9xUSfzz5oXgARRJS+KZ/aiabAiG43x CLCnMSL3hx16ZlS6yoliGz+ovNaMhEYOB5HZKNj6dhHoE28AEQEAAYkBNgQYAQgA IBYhBLqW6k1qmINPLzkEB1N69wgEzHoqBQJdy+RPAhsMAAoJEFN69wgEzHoqgW4H /1QfEHdAPI7/jFJiKs0DH89y9NacAA0rkcSQKjBGXipFdr2bUy6dsxjZEy5Aqz2Y sVa9P6d/VJYu3cQZ7LW1mMoqwyGK3zWjVFdYRmPdIC1Ckq7lpanUozZG2Y1xj16c majj3SAD+Zv5sXkyHUY6QuKjH5P0yALxbdpXSau+7zueiJ0AoaX7MP6JQjB0hxZk 4GazkqjPbXSUWJQHDlRLKLHT6jIi+mlWIdYFh3X0HT3NmN5hcvpVKVTTZr9z48pQ KiTNr+/2aolNJUv5B9N4VdzXVbZkegxKADmbwbb958uUDAE063XlqNRzzpeHrwIU AOxQYu3FEi+oqnCDjF7cr6c= =jEQQ

It seems a while back I saw instructions describing how to change the location of folders in the left column of Thunderbird. Specifically how to move the news feed folders above the inbox folder. How do I do that?

Happy to provide any more needed info.

JC

After upgrading to SuperNova on my MacBook Pro, the Mail Merge function no longer is available under "File". I looked under Tools to see if I needed to reinstall the Mail Merge Add On, and the Add On feature is also missing.

I found a discussion where someone said to download some debugging file, and to do that, you had to look under the options (three vertical dots) next to the Unified Folders Inbox. However, my Unified Folder Inbox does not have three vertical dots.

Holding emails that need to go out to multiple recipients. )-:

Thank you.

RD

Some email clients allow the user to change the subject line on an incomng email. I had a client where I could edit the subject line and then store the email in another directory. Changing the subject line allowed for a better way to find the email later on as one can change the text to something understandable and easier to seach for. Can this be done in Thunderbird or is this for the wish list? Cheers Bob

I use Thunderbird as a central repository for 5 different email addresses. Recently 1 of them stopped getting Sent messages that were created on Webmail or my Phone. I used to work fine, now it doesn't. This account is the only one I have that is set to POP3; the others are IMAP.

I'd change the settings to be IMAP but don'e see how to do that. And, I don't want to lose any messages and would like to capture the ones that have not been captured.

Any thoughts?

Process is below: 1. I can successfully navigate to add-ins and choose and add-in to download 2. I can successfully click Add to Thunderbird 3. The screen in the attachment below is shown 4. I cannot get past this screen. If i click Add nothing happens and Thunderbird eventually shuts down.

I am using Debian Linux in a virual env on chromebook currently on version 115.10.1 (64-bit) of thunderbird.

Need to be able to download TBSYNC and the appropriate add-ins to get caldav and Exchange active sync to work. PLEASE HELP :)

As 99% of users hate threading, myself included, why don't you just change the default to no threading?

I have looked at a lot of the answers to previous questions on this subject and none of them work. One has a supposed video to help but that relates to Gmail and is not understandable. Perhaps you want us to all use Gmail. I have looked the article "Message threading in Thunderbird - keep messages grouped by conversation" but that is useless and the suggested method of stopping threading doesn't work.

Please change the default!!

Is there a way I can make a filter that responds to the displayed sender (which may be different from the address)? For instance if an email has the header “From: "John Doe" <john.doe@example.org>”, can I make a filter check if “John Doe” matches a pattern?

Hello,

I'm using Thunderbird for my private and company e-mails (different companies). I need to pay close attention to selecting the right names as the auto suggest for recipients isn't using the context of the current account. Is there a plugin or setting I've missed that considers the context of composing a mail and priorities collected e-mails from the respective account or recent conversations for example? Good example is the Gmail auto complete, that has a good suggestion ranking.

Best I could find was options to sync with Google Mail contacts, but that would require to maintain a list of contacts in Google Mail, which I don't do.

Best, Elmar

Hi

I have used local Thunderbird folders for my Gmail accounts for a long time, and have now started using Protonmail (via Proton Bridge to Thunderbird) as well. Sending and receiving Protonmail via TB works fine.

I want to keep my single local inbox, sent folders etc. I set up a filter on the TB Protonmail account to copy all incoming emails to the local inbox. Works fine. I have also configured TB's Protonmail account to copy any emails created in TB's Protonmail account to the local 'sent' folder. All good.

I now want to get any emails sent via the Protonmail app to be copied to my local 'TB sent' folder - but have failed to get this to work.

If I create a TB filter to run on the Protonmail IMAP 'sent' folder, it CHANGES the separate TB inbox filter from running on the IMAP inbox, to run on the IMAP 'sent' folder!!!

I want to have two separate filters for Protonmail IMAP - one for 'inbox' and one for 'sent' - but they keep resetting so that both run either on the IMAP inbox or 'sent'. I thought filters were separate entities, but clearly not.

Am I missing something, or have I stumbled across a bug?

Thanks in anticipation.

There are two "bad email" files in Thunderbird: JUNK and SPAM. I'm still not clear on the difference.

For JUNK mail, TB gives us the option to select "NOT JUNK". Good.

But for SPAM, I cannot find the option "NOT SPAM"

1) Why are there separate SPAM and JUNK directories? And why are they managed differently? This seems terribly non-intuitive and inconsistent and just strange.

2) How can I train SPAM filter to not flag good email from trusted senders? For instance, I get email from my wife many times a day for many years. Today, TB put her email into SPAM. Isn't there a simple command to "white list" a sender's email address?

The latest version of Thunderbird has lost the Advanced Search button. I can still access it from Control/Shift/F so the function is still there, but no obvious way of accessing it

Hello,

i'm currently trying to set the font 'Aptos' in thunderbird 115.9.0 to the default font for writing e-mails.

I do know that there is an option to configure this under 'settings -> writing -> html-options -> font' but when i try to change this i seem unable to find the font Aptos in this list. I do however have other programs installed on my computer, that already use this font. How can i get and set this specific font in thunderbird?

Kind regards RedPanda