Форум поддержки Thunderbird

I normally open messages in tabs under exactly one circumstance: when I right-click on a message and explicitly open it in a tab.

I've found that (until I changed the handling of PDFs to "Save file") any PDFs that opened using Thunderbird's preview function would reopen if I closed and relaunched Thunderbird. This is not desired behavior.

I will also note that if I open Settings, it opens in a tab, rather than a separate window. This is neither expected nor desired (and my natural reaction is to click the close button on the window, closing Thunderbird, because "Settings" is something I expect to be in a window, not a tab. And that, too, reopens if I reopen Thunderbird.

And worst of all, those tabs that shouldn't be reopening at all are reopening in front of the main tab.

There was an extension called "Thunderbird-DontRestoreTabs," that would do exactly what I want, but that was made obsolete when the underlying extension technology was deprecated, so it is of no use in 115.9.0.

I turned off junk mail filtering and am glad I did. I don't get that much junk, and so I just mark it all in the inbox. What I don't have to do now is restore all the messages from a couple of listserves I'm on that Thunderbird insists on moving to junk - not every mail from these listerves, just some. There is nothing weird in the subject, I have the addresses in my address book, I'm constantly marking them as not junk, and it still insists on sending them to junk - sometimes.

But why doesn't it work properly? Why is it so wrong so much of the time?

Hey there Team!

So I flipped my table because of the new Outlook update and I'm beyond frustrated.

Not only it does not show the unread email count but also stopped working for my work email, making me miss a serious meeting!

This is ridiculous!

So now I'm transitioning to Thunderbird however, my Inbox is showing the total amount of emails. This is not what I need. What I need is the unread amount of emails.

On top of this, if I minimize the email, the Inbox amount count merges with the amount count of Sent Items. This is not what I need either... What I need is to solely have the amount of unread emails.

How can I achieve solely unread email count with Thunderbird?

Please keep me posted as I'm losing my last screw over setting up something as basic as this. -Val

When I import the attached .asc file, the following error shown

The .asc file contains following public key

mQENBF3L5E8BCAC3h/kouKVGE46c281kh8iZ5gL6phAPdxpvOsOupHTHeU9VWQLo V+gwh2XEIk/FSucWakM5K+AdWTbEFFKQqHLbIIDognL1raNGCcMtZsmjtcebz2aG /ZM2Xg1aAJ+3Swe9CNLTKl3RY+7ilE6D7LlzbY5oKsxMSbHMABjJtzOIaWL6mneo hPyu3XFn9NeVpcHMgKLEM143veT0n2mkTOo3XGuuh0hFPdQ+Gxhe/R9s0ds9XsNW cFcdRwCim+0OnDXR+JknEgTONwp0lTtJqQpAlnivKmSAz0mrhVpSl4zy8LgJPxYN d9z71m01MQ4uOqADOWQ9tL3o5Ok8YS4LCk41ABEBAAG0FXRzZ2V4ZXJjaXNlQGdt YWlsLmNvbYkBTgQTAQgAOBYhBLqW6k1qmINPLzkEB1N69wgEzHoqBQJdy+RPAhsD BQsJCAcCBhUICQoLAgQWAgMBAh4BAheAAAoJEFN69wgEzHoqtYoH/39qFvrMDu8V ml0AMFjmOTWBJECJ3hG9aizkG27XAa35mbPl5XTEbnP/ZBplT3zeCedOdRJnVaBi AzC/c2hfcz6Jwl8c5rWiSIENllyZaVBV0vKGynoV8v8fnDs7/yUYw9pTBeZ5enVI wPVYN2bOfP9m3k6o7bH5bHIrlJL9JBmX1f6aqGdvGzlbzvUapGSpKmamK5UNdG7z O0nEkCJQDewgtyoBPYljDr39nnvWXS0nB0JmcuAL+vChstnz3l5ftVVmEgX0dxn4 GPpRRANuLAKW/HtAPLoHtVHq/ESOc9PzZInqxKuJ8HU5P2/b9u7q3zVTCA+xld1P q9YeW5m8vb+5AQ0EXcvkTwEIALcz826oKUKIwvAJflffudE1K1ZHeOLK/gR0009S XZPcVDd5R3fnNDmbJWQY+NZd0frtzFSUd+2Cl6Cc7imOBeWsq7KzmUEk/gDsSyy+ qmgUwJ2q360Fd9eGxVOpjkoRfBD8lKXek187yFKdVar1z7ZDm3N231bTl853FFYE f220qe28DHVUzLJ6L0PwbNTg/VgC8Yal0DzyiL3qBNHRNSdVHlTUxIhd5rmbODS5 Dm81XWj1a2YrLdJa5ASf8GztqXjtR9FO+v9xUSfzz5oXgARRJS+KZ/aiabAiG43x CLCnMSL3hx16ZlS6yoliGz+ovNaMhEYOB5HZKNj6dhHoE28AEQEAAYkBNgQYAQgA IBYhBLqW6k1qmINPLzkEB1N69wgEzHoqBQJdy+RPAhsMAAoJEFN69wgEzHoqgW4H /1QfEHdAPI7/jFJiKs0DH89y9NacAA0rkcSQKjBGXipFdr2bUy6dsxjZEy5Aqz2Y sVa9P6d/VJYu3cQZ7LW1mMoqwyGK3zWjVFdYRmPdIC1Ckq7lpanUozZG2Y1xj16c majj3SAD+Zv5sXkyHUY6QuKjH5P0yALxbdpXSau+7zueiJ0AoaX7MP6JQjB0hxZk 4GazkqjPbXSUWJQHDlRLKLHT6jIi+mlWIdYFh3X0HT3NmN5hcvpVKVTTZr9z48pQ KiTNr+/2aolNJUv5B9N4VdzXVbZkegxKADmbwbb958uUDAE063XlqNRzzpeHrwIU AOxQYu3FEi+oqnCDjF7cr6c= =jEQQ

Hello everybody,

I have includes 4 different email adresses in Thunderbird. All of them as IMAP. All the time everthing works fine, but for the last 2 weeks Thinderbird doesnt syncronize correctly.

For example: Thunderbird sees, that there are 8 unread messages in inbox, but at the same time Thunderbird does show me only 5 of them in the inbox. (When I login the the eMail-provider then there are all the 8 messages)

The "repair"-tool did not help so far. Diffrent mail-adresses show similar behavior.

I need a good idea.

Thanks a lot!

Simon

I just subscribed to some feeds on Thunderbird for the first time and it seems like the maximum number of articles downloaded per feed is 25. How do I change this? (Screenshot of the number of messages per feed.)

I want to delete a mail folder from an IMAP server. When clicking "Delete" in right-click menu, Thunderbird tries to move it to trash. This fails for folders that are shared from another user with error "[CANNOT] Renaming not supported across non-private namespaces". When I switch the "When I delete a message" setting to "Remove it immediately" the folder is deleted correctly. Is it possible to do this just for folders? I tried Shift+Delete and holding Shift while clicking Delete but both did not work, Thunderbird tried and failed to move the folder to trash as usual. It would however be most useful if after failing to move the folder to trash it would give me an option to delete it permanently instead.

Hi!

I presumed that the settings for copies to self when sending works for both replies and forwards, but I just discovered that it only works for replies. That is NOT satisfactory, and not logical - if you ask me.

I think it worked until about 2 years ago, when Thunderbird was seriously damaged by "updates", and has not yet recovered fully...

I have attached an anonymized screenshot of the "Place a copy in" settings. The sending email address is behind 3 of the erased areas. Only "Bcc these" is different.

Any solution would be appreciated. Thank you.

Some email clients allow the user to change the subject line on an incomng email. I had a client where I could edit the subject line and then store the email in another directory. Changing the subject line allowed for a better way to find the email later on as one can change the text to something understandable and easier to seach for. Can this be done in Thunderbird or is this for the wish list? Cheers Bob

It seems a while back I saw instructions describing how to change the location of folders in the left column of Thunderbird. Specifically how to move the news feed folders above the inbox folder. How do I do that?

Happy to provide any more needed info.

JC

V 115.9.0 (32-bit) Good day, I have K9 as my mail client on my Android phone. In K9 there is the possibility to display all incoming mails of my different IMAP accounts in one folder (Common inbox). Is it possible to set up such a folder in Supernova? Thanks for detailed instructions Stefan

Good afternoon,

I recently installed Thunderbird, and it worked fine for a little while. More recently, I have been having problems with it. One of them I was able to fix after some research and trial-and-error (which was Thunderbird not letting me log into my Comcast/Xfinity email account), but this second issue is confusing. I had to remove the account to get back into it (during the first issue), so I'm guessing that must have caused this (second) problem?

When I went to check my filters/rules today (since I receive significant amounts of spam), I was shocked to see that my filters list was empty (I had about 30 or so filters in place before the first issue occurred). I'm guessing there's no way for me to get these back, and so I'll have to manually reinstate each filter "by hand"?

If there is any way to do this more easily, I would greatly appreciate it. Thank you in advance for your time!!

Hello,

i'm currently trying to set the font 'Aptos' in thunderbird 115.9.0 to the default font for writing e-mails.

I do know that there is an option to configure this under 'settings -> writing -> html-options -> font' but when i try to change this i seem unable to find the font Aptos in this list. I do however have other programs installed on my computer, that already use this font. How can i get and set this specific font in thunderbird?

Kind regards RedPanda

After upgrading to SuperNova on my MacBook Pro, the Mail Merge function no longer is available under "File". I looked under Tools to see if I needed to reinstall the Mail Merge Add On, and the Add On feature is also missing.

I found a discussion where someone said to download some debugging file, and to do that, you had to look under the options (three vertical dots) next to the Unified Folders Inbox. However, my Unified Folder Inbox does not have three vertical dots.

Holding emails that need to go out to multiple recipients. )-:

Thank you.

RD

As 99% of users hate threading, myself included, why don't you just change the default to no threading?

I have looked at a lot of the answers to previous questions on this subject and none of them work. One has a supposed video to help but that relates to Gmail and is not understandable. Perhaps you want us to all use Gmail. I have looked the article "Message threading in Thunderbird - keep messages grouped by conversation" but that is useless and the suggested method of stopping threading doesn't work.

Please change the default!!

Good afternoon to all.

I use Message Filters to automatically send certain emails to two specific folders upon receipt, based on some defined rules (mainly who the sender is). Yesterday, I accidentally clicked "Run Filters on Folder", and the actions for my filter rules ran on every folder in my account, including my Archive folder. I could not find a way to stop the action once it started, so hundreds of archived emails were pulled out of the Archive folder and repopulated into my two specified folders. In each of these specified folders, I had a handful of emails stored in order to be able to come back to them as reference or to deal with later; I remember what some of these emails were, but I don't necessarily remember all of them, and now they're mixed in with the hundreds of emails that were brought back from the archive.

So, I have two main questions:

1. How can I prevent this from ever happening again? Is there a way that I can tell the message filters that a filter should never be run on archived messages?

2. Is there a way I can "undo"/reverse what happened, so that the previously-archived emails are sent back to the Archive? Or is there at least a way to identify which emails were in the two specified folders before they were inundated with all the messages from the Archive?

Thank you.

There are two "bad email" files in Thunderbird: JUNK and SPAM. I'm still not clear on the difference.

For JUNK mail, TB gives us the option to select "NOT JUNK". Good.

But for SPAM, I cannot find the option "NOT SPAM"

1) Why are there separate SPAM and JUNK directories? And why are they managed differently? This seems terribly non-intuitive and inconsistent and just strange.

2) How can I train SPAM filter to not flag good email from trusted senders? For instance, I get email from my wife many times a day for many years. Today, TB put her email into SPAM. Isn't there a simple command to "white list" a sender's email address?