Firefox: форум сообщества

I recently opened Firefox to see a new flagged warning under my toolbar that says "The security sandbox is disabled. Your configuration is unsupported and less secure."

I have gone into about:config and adjusted every security.sandbox element to see if that would change anything; it did not.

I am running on Windows 11 Home so I cannot install or properly run Windows Sandbox.

I would either like a solution to enable the sandbox once again, or just remove the notification from the toolbar.

recent firefox update can no longer copy and paste when creating a blog post in Squarespace, I have been using squarespace for around 15 years for my websites and I have never seen this issue, Firefox 15.1 installed and all of a sudden when trying to create a blog post in Squarespace, when I right click a text box pop up and it no longer says paste so I can no longer copy and paste text - this is more than a little annoying, you will not be surprised to know that I am now using Chrome to create my posts, there is no issue in chrome. I am a firefox geek! how can i solve this problem, I just did another update from Firefox, the issue remains I have been using computers for 40 year so I am not a novice but software glitches, I am lost

Gentlemen, isn't your browser using a lot of RAM? I've been freaking out about it in recent years. That's only with 25 tabs open!! Despite the fact that the system was installed just a day ago, without any tweaks!!!

I use the IRS form filler to pay my taxes...have for years with Firefox browser. This year (for 2024 return) when I sign into the site the 1040 form does not display correctly. the boxes are to the right and below the actual placement. I emailed IRS who said it is a setting in Firefox. I tried the site using Microsoft EDGE and it displays correctly. I have searched for possible solutions and tried them all like using/on and off excelerator, letting Firefox chose size and colors of sites, turned off Noton etc. I posted another question here but no replies or looks so maybe I did something wrong so I will try to post again. I have W10 fully updated and Firefox too up to date. I understand I could use Edge but never had to and prefer to use Firefox as I have before. any suggestions would be appreciated or where I can report a possible issue with Firefox. I have attached a sample. thank You

I have a profile that causes odd behavior, within the profile, and to the OS.

Regarding the profile itself:

1. I use Multiple Tab Handler, which should allow me to move tabs on the tab bar with the mouse, but it does not (see image of proper behavior)

2. Normally, i can drag this padlock button to the desktop to create a shortcut. but now, it will not move/drag (see image 2)

3. I also have a backup profile from several months ago that has none of the above symptoms. However, If I substitute it's sessionstore.jsonlz4 file with the the one from the problematic profile, all the bad behavior mentioned above re-emerges.

I know this sounds strange, but, I also get external display issues when using the broken profile. These events are random, and manifest themselves differently, so I can't duplicate them. Essentially, these snips are examples of images from the taskbar tabs, or the clock area, suddenly superimposing themselves on the top portions of the taskbar toolbar area.

This is the view of my clock area (see next image 3)

In the following image, imagine that the portion on the left, that opens the start menu, is now hidden under what looks exactly like the clock area on the right, superimposed over it (see next image 4)

Those aberrations are removed by simply moving the mouse cursor over them, but they will continue to occur in any number of variations over any area of that top toolbar.

Is there a Session Manager that will save the session, to be later restored into that previous profile, but not also pass along the corruption?

I recently encountered an issue when attempting to login to The Coventry Building Society website using Firefox (desktop PC & Windows 10):- https://www.coventrybuildingsociety.co.uk/ It failed to display the page used to enter the one time passcode used for two factor authentication.

After looking on some forums I discovered this is because 'Strict' tracking protection was enabled. If I change to 'Custom' and uncheck 'Tracking Content' then things work as expected.

I also read on a forum that you can leave tracking protection set to 'Strict' but enter the URL for the problem website under 'Enhanced Tracking Protection -> Manage Exceptions'. I tried entering 'https://www.coventrybuildingsociety.co.uk/' Initially this appeared to work. However, when I tried it again the following day, the page failed to load as before. I had to change back from 'Strict' to 'Custom' and uncheck 'Tracking Content' once again. It's as if the exception URL is ignored in 'Strict' mode.

Am I doing something wrong or is this how it is supposed to work? Do I need to click on the shield icon (to the left of the padlock icon) and turn off 'Enhanced Tracking Protection' every time I visit the website?

Hi, I'm running FF 149.0 (64-bit) on Windows 11. I've used profiles for a while now and on several occassions I've "lost profiles". Currently I have three profiles which I set up and edited the icon and colour associated with each. When I launch FF I see the Profile Manager and can select any of the three and I can create a new profile which shows here. However, once in any one of the FF profiles I don't see the others - by which I mean that when I go via the hamburger lines top right and click on the current profile, the 'other profiles' section is blank. I also cannot edit the profile from using the edit pencil top right (after clicking the hamburger lines and clicking on the current profile), it takes me to about:editprofile but the page is completely blank. Confusingly, if I go to about:profiles I see two profiles, neither of which shows up in the Profile Manager! I'm going round in circles trying to understand where to edit my exisitng profiles and make sense of the five profiles that don't all show up in the same place!

AvailablePageFile: 9994584064 AvailablePhysicalMemory: 6990008320 AvailableVirtualMemory: 138533823639552 BackgroundTaskMode: 0 BuildID: 20250616215311 CPUMicrocodeVersion: 0x64 CrashTime: 1750858075 HeadlessMode: 0 InstallTime: 1750788070 ModuleSignatureInfo: {"Mozilla Corporation":["firefox.exe","xul.dll","gkcodecs.dll","nss3.dll","mozglue.dll","lgpllibs.dll"],"Microsoft Windows Software Compatibility Publisher":["msvcp140.dll","VCRUNTIME140_1.dll","VCRUNTIME140.dll"],"Microsoft Windows":["MpDetours.dll","wsock32.dll","dbgcore.dll","ktmw32.dll","winmm.dll","version.dll","propsys.dll","DWrite.dll","uxtheme.dll","dbghelp.dll","windows.storage.dll","kernel.appcore.dll","ntmarta.dll","CRYPTBASE.dll","msasn1.dll","ntasn1.dll","ncrypt.dll","bcrypt.dll","ucrtbase.dll","crypt32.dll","msvcp_win.dll","win32u.dll","KERNELBASE.dll","gdi32full.dll","WinTypes.dll","bcryptPrimitives.dll","wintrust.dll","shell32.dll","shlwapi.dll","user32.dll","rpcrt4.dll","SHCore.dll","ole32.dll","psapi.dll","kernel32.dll","advapi32.dll","imm32.dll","oleaut32.dll","msvcrt.dll","gdi32.dll","ws2_32.dll","combase.dll","sechost.dll","ntdll.dll"]} ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384} ProductName: Firefox ReleaseChannel: release SafeMode: 0 SecondsSinceLastCrash: 820 StartupCrash: 1 StartupTime: 1750858075 SubmittedFrom: Client SystemMemoryUsePercentage: 79 Throttleable: 1 TotalPageFile: 65870069760 TotalPhysicalMemory: 34067255296 TotalVirtualMemory: 140737488224256 UptimeTS: 8.00534 Vendor: Mozilla Version: 140.0 This report also contains technical information about the state of the application when it crashed.

Hello, I am running Firefox on a W10-Pro PC. I always click the lock to check certificate validation. In the last month I keep seeing "Connection verified by a certificate issuer that is not recognized by Mozilla".

When I click for more information I see that "Norton Web/Mail Shield" does not recognize the certificate issuer. When I click on Learn More it takes me to a Firefox site "How to disable the Enterprise Roots preference" I also checked W10 certmgr.msc and I see Norton is listed. Images included below. I would love to resolve this issue. Thank you for your time.

This may be more in "settings" than in "search, tag, and share".

Since updating to the 140 series, the URL bar has what appears to be a nonremovable "what kind of search do you want to run?" activated by typing in the URL bar.

Do Not Want. That's the entire purpose of having the separate search bar. For those who only have the URL bar visible, that might make sense, but right in the core Settings I chose to have both the URL bar and the search bar. I do not ever want searches initiated from the URL bar.

Is there a way to remove this unwanted "extra feature"?

And a gentle hint to those doing interface tweaking and redesigns: Those of us who use "separation" features directly supported by the program — that is, not requiring an extension or theme — would really, really appreciate having our choices respected. That the separate search bar is already selected and visible, or having a full menu bar (and not just the hamburger symbol) visible, should be a hint that there just might be functional, safety, security, and/or disability-accommodation considerations behind that user's choice, and you shouldn't override it Just Because.

I recently upgraded FF on this computer and can no longer sign in to my att.net email account, although I was able to sign in on another computer on FF earlier today. I just get an error message and Att can't help...is there a setting that has me locked out? I can also access email on other browsers just not the FF version on this computer.

I couldn't see password management page. To be specific, I click the "password" option in the top right corner lists. Normally it will show all the website that firefox saved, but now I couldn't see anything except frame. I will upload the interfance that I see. this problem happend since an update. And problem contines after several patches. The firefox version that I use is "153.0.3(64-bit)" please help!

I started noticing that Firefox was giving me a lot of "not responding" freezes the past couple of weeks. The past couple of days I basically cannot access Firefox at all - constant, immediate freezing. I have tried uninstalling/reinstalling (multiple times), disabling hardware acceleration, running troubleshooter mode (still freezes! if it opens at all!), deleting profiles, restarting my computer, etc. I've done just about everything I can find online about this issue. Nothing has worked. I have no issues with Chrome or Edge.

Any suggestions??

Hello all, I have FF 152.0.6 in use on Fedora 43 xfce Qubes OS VMs. The only issue I have encountered is when I try to load the web UI for Proxmox Datacenter Manager. As soon as I log in to the web UI Firefox vanishes. I have tried this in troubleshooting mode with the same results. I can open the same web UI in a Debian 13 Qube and it works perfectly. The FF version there is v.140.13.0esr. These are simply the default versions that come with Qubes 4.3 templates. I can also access the web UI in the original Fedora Qube with Chromium browser with no crash. I have also tried a different Fedora qube with the same failure result as the original.

I can use Chromium but would prefer a streamlined experience with just one browser. I thank all of you in advance any thoughts or suggestions. I am a long time Firefox and Mozilla user.

Have a great day. SS