Отображение вопросов с тегом: Показать все вопросы

Disable Firefox Password Manager Completely via plist

Attempting to disable FF Password manager completely for my org via a plist. Currently have the password manager itself disabled but can't figure out how to disable the … (читать ещё)

Attempting to disable FF Password manager completely for my org via a plist.

Currently have the password manager itself disabled but can't figure out how to disable the Auto-fill settings with previously saved passwords prior to the password manager being disabled?

Is this possible? Or is this disabled already when the password manager itself is disabled?

Currently have this set via a plist:

<key>PasswordManagerEnabled</key> <false/>

Задан Matthew L 2 дня назад

Последний ответ от Mike Kaply 1 день назад

Assistance Needed with Firefox Browser and Group Policy Settings

Hi there, We are currently utilizing Windows Server 2019 as our development server. To maintain security protocols, we have implemented a Group Policy to block internet … (читать ещё)

Hi there,

We are currently utilizing Windows Server 2019 as our development server. To maintain security protocols, we have implemented a Group Policy to block internet access on this server. Initially, this configuration successfully restricted internet access on all browsers, including Firefox. However, recently we encountered an issue where internet access became available solely through the Firefox browser, posing a significant data security risk.

Upon investigation, we discovered that Firefox allows users to modify proxy settings, effectively bypassing our Group Policy restrictions. Unlike other browsers, Firefox permits users to adjust proxy settings without sufficient rights, thus overriding our established restrictions.

To mitigate this issue, we require guidance on enforcing Group Policy settings within Firefox to prevent unauthorized alterations to proxy settings and ensure internet access remains restricted. It's important to note that Firefox is exclusively utilized for development purposes on our server.

Your assistance in resolving this matter would be greatly appreciated.

Regards, Hiten

Задан hitenj.trivedi 3 дня назад

Последний ответ от Mike Kaply 1 день назад

Trigger Update through command line or script

Is there a way to trigger a Firefox browser update through command line or script? I need to trigger an update across a few hundered computers and I can do this, but thr… (читать ещё)

Is there a way to trigger a Firefox browser update through command line or script? I need to trigger an update across a few hundered computers and I can do this, but through command line or script automation. What is the command line syntax to do this, if there is any?

Thank you for your help

Задан pcdl 3 дня назад

Последний ответ от cor-el 3 дня назад

How to Disable Saved Address and Credit Cards

During a client Audit earlier this week we were dinged on not having the option in Firefox ESR to block manually saving Addresses and Credit Cards. We have the autofill … (читать ещё)

During a client Audit earlier this week we were dinged on not having the option in Firefox ESR to block manually saving Addresses and Credit Cards. We have the autofill disabled however users can still manually add credit cards and addresses and this poses an issue with our call center agents handling Credit Card info. I'd like to be able to gray out the Saved Addresses and Saved Credit Card boxes so as to prevent agents from manually entering card data into it using a GPO or Registry setting that we can push and apply to all our domain PCs. Ideally, if we could add an entry to the JSON preferences in the Mozilla GPO that would gray those options out that'd be best but any option that removes the users ability to add CC info would be acceptable.

Задан rhall4 1 месяц назад

Последний ответ от rhall4 1 неделю назад

CyberArk Extension ID

I'm looking to allow the CyberArk extension for FireFox, via our GPO. I am not seeing the application ID for the extension, which is needed. I'm hoping that you folks ca… (читать ещё)

I'm looking to allow the CyberArk extension for FireFox, via our GPO. I am not seeing the application ID for the extension, which is needed.

I'm hoping that you folks can provide that ID.

Thanks!

Задан dlacivita 2 недели назад

Последний ответ от cor-el 2 недели назад

  • Решено

Application Handlers

Hi All, I have been on the struggle bus lately trying to get the application handlers set properly in our GPO. I am trying to get PDF, webp, avif to open in browser, and… (читать ещё)

Hi All, I have been on the struggle bus lately trying to get the application handlers set properly in our GPO. I am trying to get PDF, webp, avif to open in browser, and jnlp to auto launch Java. Any help will be greatly appreciated!

{"application/pdf":{"action":3,"extensions":["pdf"]},"image/webp":{"action":3,"extensions":["webp"]},"image/avif":{"action":3,"extensions":["avif"]},"application/x-java-jnlp-file":{"action":4,"handlers":[{"name":"javaws.exe","path":"C:\\Program Files (x86)\\Java\\jre-1.8\\bin\\javaws.exe"}],"extensions":["jnlp"]}}

Задан Chris Wilkerson 3 недели назад

Дан ответ Mike Kaply 2 недели назад

Folder redirection conflicts synchronization firefox profile

Welcome, We are implementing redirected folders in our company via Widnows Server. We are also redirecting the Appdata folder. We have offline mode enabled which means th… (читать ещё)

Welcome, We are implementing redirected folders in our company via Widnows Server. We are also redirecting the Appdata folder. We have offline mode enabled which means that the folders are synchronised every 5 minutes. The synchronised Appdata folder has a Firefox profile which causes a lot of conflicts. Every time the folder is synced there are conflicts like "Both versions have been updated since the last sync" or "Cannot sync now. Try again". I attach a screen shot of how much of this there is. No other applications cause such errors. Only Firefox blocks us from a large deployment. If the problem cannot be resolved we will be forced to abandon the FireFox browser altogether. Has anyone had a similar problem?

Задан sebastian.pawlowski 3 недели назад

Последний ответ от Fjoerfoks 2 недели назад

I am working for an Organization.

HI Team, I am working for an organization, members have different versions installed and need help to uninstall the Firefox completely, Member able to see the applicatio… (читать ещё)

HI Team,

I am working for an organization, members have different versions installed and need help to uninstall the Firefox completely, Member able to see the application installed in Apps and features and but files do not exist in program files or program files x86, please someone please contact me for my queries [removed phone# from support forum]. my email id [edited] @gmail.com

The script is not removing the application

IF EXIST "%ProgramFiles%\Mozilla Firefox\" ( "%ProgramFiles%\Mozilla Firefox\uninstall\helper.exe" /s )

IF EXIST "%Program Files (x86)%\Mozilla Firefox\" ( "%Program Files (x86)%\Mozilla Firefox\uninstall\helper.exe" /s )

Задан siji monish karial 2 недели назад

Последний ответ от Mike Kaply 2 недели назад

Disable Save menu entry from Firefox built-in PDF Viewer on local Linux system

I would like to prevent users to navigate on the Linux system when they view a PDF and then use the Save option. The "PDFjs" policy enables or disables the PDF Viewer but… (читать ещё)

I would like to prevent users to navigate on the Linux system when they view a PDF and then use the Save option. The "PDFjs" policy enables or disables the PDF Viewer but does not control the built-in PDF Viewer menus.

Задан InfoMaze 3 месяца назад

Последний ответ от zeroknight 3 недели назад

Looking to customize Firefox application via Intune Plist

Looking to specify homepage, homepage button, and new tab page within Firefox on our Mac fleet. I was able to create a plist file for macs, and it was "deployed successf… (читать ещё)

Looking to specify homepage, homepage button, and new tab page within Firefox on our Mac fleet.

I was able to create a plist file for macs, and it was "deployed successfully" according to Intune, but no changes actually happened on my test machines.

I've uploaded a redacted version of the used plist.

Anyone out there have any ideas?

Задан jmajors50 1 месяц назад

Последний ответ от Mike Kaply 1 месяц назад

Best Way to force firefox update without opening the application

We are currently looking at devices with out-of-date Firefox versions these are listed with vulnerabilities within our environment and need to be patched to the latest ve… (читать ещё)

We are currently looking at devices with out-of-date Firefox versions these are listed with vulnerabilities within our environment and need to be patched to the latest version to cover those vulnerabilities.

With the volume of patching required, we want to be able to enable auto-update and allow the application to patch itself.

However, the current options via group policy don't seem to work as I've read on such threads https://bugzilla.mozilla.org/show_bug.cgi?id=1876302.

The application Autoupdate has been enabled within local group policy as a test and nothing seems to force the application to update unless a user enters the application and selects about.

Reading into how Firefox does this it doesn't seem viable to enable an auto-update feature without specifying the version it needs to upgrade to, we can currently patch to specific versions using SCCM.

Is anyone aware of a solution to this problem or another method?

Looked into calling updater.exe and the maintenance service but nothing i successful when trying to call on these.

Задан oliver.gillman 1 месяц назад

Последний ответ от zeroknight 1 месяц назад

Proxy not working

Hello, from Terminal Servers, it is not possible to browse the Internet via FortiGate's explicit proxy from the Firefox browser, while there is no problem with Chrome or … (читать ещё)

Hello, from Terminal Servers, it is not possible to browse the Internet via FortiGate's explicit proxy from the Firefox browser, while there is no problem with Chrome or Edge. When the user tries to browse external sites, the proxy sends the error page "You need to authenticate to use this service". It seems that Firefox does not pass user authentication to FortiGate. The proxy authenticates users per session via Kerberos tickets.

Firefox version: 115.5.0esr

I also performed the following settings to pass the Kerberos ticket to the proxy without success: https://people.redhat.com/mikeb/negotiate/

I also noticed that it is not possible to change the "network.negotiate-auth.allow-proxies" setting from "false" to "true." Is this my problem? Is it normal that it cannot be changed?

Attached are the settings.

Thank you in advance.

Задан akas89 4 месяца назад

Последний ответ от Mike Kaply 1 месяц назад

Silent update manual

Hello, I'm reaching out to inquire if there's a method to perform silent updates for Firefox without the need to launch the browser. Our organization has deployed multip… (читать ещё)

Hello,

I'm reaching out to inquire if there's a method to perform silent updates for Firefox without the need to launch the browser. Our organization has deployed multiple browsers across over 400 PCs, and while Firefox is a common choice for many, a significant number of users do not actively use it. Consequently, Firefox does not get updated on these systems because it is not being opened. Is there a command line option or a similar tool we can utilize to initiate silent updates manually?

Best Regards, Sadin Junuzovic

Задан junuzovicsadin 1 месяц назад

How to disable welcome back notification?

Seems to be new in 122.0 because i never received that before. It asks if you want to open links with Firefox and if you do, it sets file associations for htm / html and … (читать ещё)

Seems to be new in 122.0 because i never received that before. It asks if you want to open links with Firefox and if you do, it sets file associations for htm / html and things like that. However in a company environment i want to supress that notification

Задан Tynth 2 месяца назад

Последний ответ от Mike Kaply 2 месяца назад

GPO, Reg Key, Nothing works to force add/install an extension.

I am writing from an enterprise environment and I have been directed to the community page by Mozilla support to seek answers. This approach seems somewhat unreasonable f… (читать ещё)

I am writing from an enterprise environment and I have been directed to the community page by Mozilla support to seek answers. This approach seems somewhat unreasonable for an enterprise setting and it has led me to consider discontinuing their product within our organization. I had requested support to send me a copy of my previous correspondence as I had forgotten some details, but this request was ignored, which is disappointing.

I am skeptical about receiving the help or answers I need here. If there is a more direct line to Mozilla support, I would greatly appreciate being redirected there.

We are currently using Firefox 121.0 and are attempting to implement the Applied Epic extension. I have updated the ADMX policy.

Originally, the reg key flip I created did work but something has changed since then. See screenshot of this. I followed the guide provided at https://github.com/mozilla/policy-templates/blob/v5.5/docs/index.md, which instructed me to place the registry key in Software\Policies\Mozilla\Firefox\Extensions\Install\1. However, the guide did not specify whether this should be in HKLM or HKCU. I tried this instead, and it did not work.

I also attempted to implement the extension via GPO, but this was unsuccessful. I tried the new Extension Management system as well, but to no avail.

Here is the JSON configuration I used: {

 "AppliedEpicExtension@gmail.com": {
   "installation_mode": "force_installed",
   "install_url": "https://addons.mozilla.org/firefox/downloads/file/4143256/applied_epic_extension-3.16.3.xpi"
 }

}

Despite following the guide and trying multiple methods, none of the options seem to work. I would appreciate any guidance on what I might be doing wrong.

Задан BM 3 месяца назад

Последний ответ от Mike Kaply 2 месяца назад

  • Решено

Extensions Management .json is not working

Hello, I am trying to create a management policy for extensions where all themes are allowed, some extensions are force installed, other specified ones are allowed, and … (читать ещё)

Hello,

I am trying to create a management policy for extensions where all themes are allowed, some extensions are force installed, other specified ones are allowed, and anything else is blocked. I have been scouring the web looking for samples and I just can't get it to work as intended. Here is a sample of what I have written.

{ "*": { "blocked_install_message": "IT has blocked the installation of UNAPPROVED add-ons. Please contact the IT Service Desk to request approval.", "install_sources": "https://addons.mozilla.org/*", "allowed_types": ["theme","extension"] }, "plugin@okta.com": { "installation_mode": "force_installed", "install_url": "https://addons.mozilla.org/firefox/downloads/file/3601147/okta_browser_plugin.xpi" }, "support@lastpass.com": { "installation_mode": "force_installed", "install_url": "https://addons.mozilla.org/firefox/downloads/latest/lastpass-password-manager/latest.xpi" }, "developer@zoom.us": { "installation_mode": "allowed", "install_url": "https://addons.mozilla.org/firefox/downloads/file/4212428/zoom_new_scheduler-2.1.52.xpi" }, "info@katalon.com": { "installation_mode": "allowed", "install_url": "https://addons.mozilla.org/firefox/downloads/file/3826743/katalon_automation_record-5.5.3.xpi" } }

In this current state, I am allowed to install themes, I get the forced installs, but I can install ANY extension. I don't want that.

If I modify the blocking section with [ "installation_mode": "blocked", ], then I only get the force installed plugins and I can't do anything else. It even removes any previously installed themes or plugins not explicitly forced in. The allowed plugins can't be installed either.

I have also tried it without the "extensions" allowed_type but the result did not change. To recap, I need to block any extensions not explicitly pushed or allowed. Would anyone be able to assist and point out what I may be missing please?

~Regards

Задан yaponte 2 месяца назад

Дан ответ yaponte 2 месяца назад

  • Решено

How to disable Quic protocol in Windows with MS Intune

Hello I am looking for a way to disable the QUIC protocol in Firefox through Intune. tried by below value but its not working, anyone did the settings in MS Intune for W… (читать ещё)

Hello

I am looking for a way to disable the QUIC protocol in Firefox through Intune. tried by below value but its not working, anyone did the settings in MS Intune for Windows? <enabled/> <data id="JSON" value=' {

 "network.http.http3.enable": {
   "Value": 0,
   "Status": "user"
 },

{

 "network.http.http3.enable_0rtt": {
   "Value": 0,
   "Status": "user"
 }

}'/>

Thanks

Задан Shri Sivakumaran 3 месяца назад

Дан ответ Shri Sivakumaran 2 месяца назад

  • Решено

How to disable Quic protocol in Mac with Jamf

Hello I am looking for a way to disable the QUIC protocol in Firefox through Jamf Pro. tried by below value but its not working, anyone did the settings for Mac? <… (читать ещё)

Hello

I am looking for a way to disable the QUIC protocol in Firefox through Jamf Pro. tried by below value but its not working, anyone did the settings for Mac?

<plist version="1.0"> <dict> <key>Preferences</key> <dict> <key>network.http.http3.enable</key> <dict> <key>Value</key> <false/> <key>Status</key> <string>user</string> </dict> <key>network.http.http3.enable_0rtt</key> <dict> <key>Value</key> <false/> <key>Status</key> <string>user</string> </dict> </dict> </dict> </plist>


Thanks

Задан Shri Sivakumaran 3 месяца назад

Дан ответ Mike Kaply 3 месяца назад

  • Решено

Firefox Intune OMA-URI error

Dear Everyone, Facing issue with deploying Configuration Profile for Extension Settings via Intune. Tried ADMX imported template with adding there "block all extensions"… (читать ещё)

Dear Everyone, Facing issue with deploying Configuration Profile for Extension Settings via Intune. Tried ADMX imported template with adding there "block all extensions" and allow certain ones. Worked perfect in Jamf, for Intune failing all time. We are using Firefox v.121, policies are for v.120, but I am in doubt that this is the issue. Can someone review and let me know if there any issue or may be changes? Using latest instructions https://mozilla.github.io/policy-templates/#extensionsettings Also here is my OMA, very easy.

OMA used ./Device/Vendor/MSFT/Policy/Config/Firefox~Policy~firefox~Extensions/ExtensionSettings

Value(string):

<enabled/> <data id="ExtensionSettings" value=' {

 "*": {
   "blocked_install_message": "Security Test",
   "installation_mode": "blocked",
   "allowed_types": ["extension"]
 },
 "{bf855ead-d7c3-4c7b-9f88-9a7e75c0efdf}": {
   "installation_mode": "force_installed",
   "install_url": "https://addons.mozilla.org/firefox/downloads/latest/zoom-new-scheduler/latest.xpi"
 },
   "@react-devtools": {
   "installation_mode": "allowed"
 }

}'/>

Задан Valery Volos 3 месяца назад

Дан ответ Mike Kaply 3 месяца назад

Fail to update firefox

We're exploring the possibility of implementing a mass update for Firefox through backend management, leveraging PowerShell scripts or any applicable method that can stre… (читать ещё)

We're exploring the possibility of implementing a mass update for Firefox through backend management, leveraging PowerShell scripts or any applicable method that can streamline the update process for our users.

Additionally, we've encountered instances where users have installed Firefox via local profiles, posing challenges for centralized updates. I'd appreciate any insights or guidance on how we can address this issue effectively to ensure these installations align with our centralized management approach.

Задан slimmonkey 3 месяца назад

Последний ответ от Mike Kaply 3 месяца назад