Форум поддержки Все продукты

I just switched to Windows 10 from Windows 7. Firefox was working fine, but now many or most pages are garbled; see screen-capture fragments at http://www.fenichel.net/firefox/. I tried a new Firefox 64-bit, but it crashed on most pages.

Just updated a friend's computer from Windows 7 to 10. Installed firefox over previous ESR and now there's no way to remove the search bar from the new tab page. On my W10 system, the search bar isn't there, not sure how or why, but on her's there's no option NOT to show it as there used to be.

I found some VERY old (2014) info on this but doesn't seem to be up to date.

PLEASE give us our options back and stop taking them away, sheesh, getting as bad as Microsoft.

Is there a workaround for this to remove the redundant search bar from the new tab page since you can search from the address bar?

Thanks!

Not sure if this is a new 'feature' post-update but it's damn annoying. I was busily transferring some photos that I'd taken on my phone over to Firefox on my Mac. Wasn't until I went to find them on the Mac where they would normally be and couldn't find them. Bit of digging, opening up the Download 'history' on Firefox and saw "File not downloaded: possible security risk".

I can see that I can disable this 'feature' but it seems to be a global "allow". Is there any way I can tell Firefox to allow any downloads from my devices on my network yet warn for potentially insecure downloads from the web?

TIA

As of an hour ago suddenly all of the usual suggestions and autofill with bookmarks in my address bar are wrong and out of order. I didn't close out of or update Firefox, I was just browsing online. I didn't change anything in my settings or have opened that up in days at the minimum. I cannot figure out how to either revert back or tell Firefox to not show me these choices so I can get my old ones.

I'll give an example: When I typed in "ma" it would show me mangadex.com, which I often go to. Now when I do it not only is 5th on the list it shows up and fills in "https://www.manticgames.com/", which I don't have that specific page bookmarked. I have "https://www.manticgames.com/games/kings-of-war/" bookmarked, but not that homepage. But now all of a sudden it is showing me the homepage of that site when I begin to type in "ma".

This is incredibly irritating and I have no idea why it's doing this at me out of nowhere. I don't want about anything showing up besides my bookmarks and specifically only the pages I bookmarked.

Is there a way to enable sounds when the built in pop-up blocker blocks a pop-up or make the banner more noticeable? I often dont realize a pop-up has been blocked and cant figure out why I' not getting the new content

When I download PDFs on my MacBook using Firefox (currently 124.0.2 (64-bit)), they are always blank - I have attached a screen shot.

But if I download the same PDF using Safari, it opens straightaway - 2nd screen shot.

Is there something I need to adjust in Firefox to allow PDFs to open?

Anyone else had the problem of not being able to sign in to the Amazon Parent Dashboard via Firefox? But works on Chrome. Same on desktop and android versions of Firefox.

Amazon chat support not helpful and just told me to use Chrome!

Sehr geehrte Damen und Herren, ich mußte leider Thunderbird neu installieren und seit dem erscheinen Nachrichten nur noch in seperaten Fenstern. Normalerweise war die Darstellung 2geteilt: Oben die Nachrichten und unten die Inhalte. Wie stell ich das wieder her?

Mit freundlichen Grüßen Peter Treek

Hello,

First time posting here, so I'm hoping that someone can help me out.

I'm encountering a very odd issue on my Macbook Pro running MacOS Sonoma 14.4. I am unable to access two sites – allrecipes.com, and seriouseats.com on my home WiFi network on the Macbook.

These sites work on other browsers (tested on Safari and Chrome), and they also work on my iPhone.

Oddly, when I went to work and tried to access these sites via WiFi using Firefox, I was able to.

I am unsure what the problem is – the ability to access these sites on Safari, Chrome, and my iPhone at home suggests that it's not a network issue. I haven't encountered this issue with any other sites.

I am attaching three screenshots 1) The error message that I'm seeing for allrecipes when I attempt to access the site 2) The security tab which shows that the connection is unencrypted for allrecipes (home network) 3) The security tab showing that the connection is encrypted for alrecipes (work network)

Thanks

I recently moved to a new Windows machine and can not send mail from either hotmail or gmail accounts. I am able to send and receive from my account at outlook.office.com, but hotmail uses outlook.office365.com as the mail server.

Thunderbird Version: 115.10.0 Windows 11 Version: 23H2

The message I receive when trying to send is: Sending of the message failed peer's certificate has an invalid signature the configuration related to smtp.gmail.com must be corrected (also for smtp.office365.com)

I did try all of the fixes advised here, as the error message certainly matched what I was seeing: https://support.mozilla.org/en-US/questions/1295861 so my settings in TB are currently: security.tls.version.min = 1 security.tls.version.enable-deprecated = true

The final suggestion in the above thread was to move back to Thunderbird version 68.11.0, which I will try if nothing comes of this thread by the weekend.

I am running Thunderbird 115.9.0 on Lubuntu 23.10. I have 4 IMAP accounts I use. The folder and file is not shared and I am the only account with access to the directory.

I use emoji as tags for messages, and have a large number of filter rules defined, nearly all of them Tag a message and set the Junk Status to `Not Junk`. These rules are all set to execute `Manually` or on `Getting New Mail`.

If I select a given inbox folder for a mailbox and select `Tools` > `Run Filters on Folder`, all of the messages are properly tagged, however, after some time (10m?, On new mail receipt?) at least one of my mailboxes will lose all of the tags that were previously set for messages. Manually running the filters will restore the tags, until they disappear again some time later.

I've not seen anything in the Browser Console log (but perhaps I'm not using the right term?) Is there any way I can diagnose or fix this issue? Thanks!

Hey, so, I've seen this question a couple times when I searched, but (a) there didn't seem to be any solution and (b) they were all regarding Macs and I'm on Windows 11 v 23H2. I keep getting bubbles saying that Firefox wasn't able to check for updates- not that it couldn't download or install updates, but it couldn't search for one. I also did the "about Firefox" thing and it gives me the same message. Both of these have been going on for a couple days and I have attempted restarting Firefox multiple times and did a manual update [125.0.1 (64-bit)] just in case there was a problem there. Now, I've tried the tips from the other threads (turning off the proxy, checking any anti-update policies, and checking the add.update.url in the config settings) with no luck. So in an effort to either bump the question or get any Windows oriented answers... Thanks muchly

There are two "bad email" files in Thunderbird: JUNK and SPAM. I'm still not clear on the difference.

For JUNK mail, TB gives us the option to select "NOT JUNK". Good.

But for SPAM, I cannot find the option "NOT SPAM"

1) Why are there separate SPAM and JUNK directories? And why are they managed differently? This seems terribly non-intuitive and inconsistent and just strange.

2) How can I train SPAM filter to not flag good email from trusted senders? For instance, I get email from my wife many times a day for many years. Today, TB put her email into SPAM. Isn't there a simple command to "white list" a sender's email address?

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

I have the latest FF browser. I'm not using any proxy service, just spectrum connection. when i try to access my credit union account, i get this message

"Error: "WWF2TUh4dnM=" - You're using an outdated browser or are using a Proxy service which is unsupported. Please update your browser or turn off your Proxy to continue, thank you."

how can i get past this? All help appreciated!

I updated Thunderbird to the latest version and now I have a problem that continues to remain after closing the process.

Thunderbird 115.10.0 64bit (Build ID 20240412173147) OS Windows_NT 10.0 22631

Old computer: Windows 10 Pro, 64 bit Thunderbird 115.10.0 32-bit (Don't know why it's 32-bit version on a 64-bit computer or whether that's relevant)

The Profiles folder is here (with 5 profiles): C:\Users\<User>\AppData\Roaming\Thunderbird\Profiles

The new computer is Windows 11 Pro, 64-bit I just installed Thunderbird (V115.10.0 (64-bit) on the new computer.

On the new computer, the Profiles folder is here: C:\Users\<User>\AppData\Roaming\Thunderbird\Profiles

I followed the directions here https://support.mozilla.org/en-US/kb/moving-thunderbird-data-to-a-new-computer

I basically took the Profiles folder that came with the Thunderbird installation, renamed it (Profiles.orig) and copied in the Profiles folder from the old computer in its place. When I start up Thunderbird, I get this error message:

           Your Thunderbird profile cannon be loaded.  It may be missing or inaccessible

What am I doing wrong? I've updated Thunderbird on the old computer and copied the Profiles folder over to the new computer again. Same result.

Could it be 1. an issue with the user name on the old computer is different than the one I'm using on the new computer? 2. All files on the new computer are set up as local (the user on the old computer started out as a Microsoft user but I made it local so as not to have to use OneDrive).

I'm stumped. Any help will be very much appreciated. If you need any more details I'm happy to provide them.

Twice in the past 2-3 weeks I have had to restart the computer, Linux Mint 21.2 Firefox 124(when updated in the past couple of days), due to the mouse freezing up and not being able to move the mouse on the screen. That's not the current problem, but it might help direct things to the final solution.

After the most recent reboot last night now I'm having a rather problem. The up/down arrow keys are no longer scroll me up and down a webpage like they always have in the past. Instead of doing smooth scrolling like they always use to, now they are scrolling me up and down the links on a web page. For example, if I were to be on youtube it would first want to scroll me down the left side links before taking me through each and every video link, when the page goes to load in more videos than it wants to go back and scroll me down the left side links again. It acts like it is taking me through the html code, line by line, instead of scrolling me smoothly down the webpage. The only way I can scroll smoothly down the webpage is to use the mouse on the scrollbar on the right side. It does this both in normal mode and in Troubleshooting Mode.

I have checked and beret scrolling is false as well as beret_shortcut. Use autoscrolling, use smooth scrolling, show scrollbars and always underline links are all clicked on. Always use the cursor keys to navigate within pages is unclicked. I have tried different changes between clicking on and unclicking those options with no change being noticed.

How can I get this back to the way it used to run?