Все продукты: форум сообщества

Today for the first time after the latest update 127.0 (64-bit), my many firefox pages and tabs crashed and closed and a pop up to send crash report.

So I have fired up firefox again to find only a single page opens up, I have lost probably 16+ pages with multiple tabs on each, been like that for months, I have 32GB memory so there is normally no issues or slowness. However after the crash, even though only a single firefox page is open, windows task manager shows Firefox (20) and if I expand the task, I can see each firefox is taking lots of memory.

So it looks like the old session pages/tabs are still there somewhere but not accessible, I would like to get them back if possible. I went through reseting it to default, disabling the add ons etc but nothing has worked.

For months I was experiencing the problem of "Thunderbird not responding" occasionally. It was a short duration issue (a few seconds to a minute). I reinstalled Thunderbird several times without success. I read almost every comment available online about this problem and I tried many ideas and recommendations I found without success. Most recently the problem became so serious that it was not a nuisance any longer. It was nearly impossble to work waiting for minutes to open an email or to continue typing while preparing a message and being interrupted by the problem I am describing. I ran Thunderbird in safe mode and determined that none of the add-ons is causing the problem. I turned the firewall OFF and determined that firewall was not causing the problem. I then decided to run Thunderbird in Offline mode and found that the program works normally. Then while in Offline mode I decided to download more messages and the program asked me if I wanted to switch to the Online mode. I said yes. New emails were downloaded and without going back to the Offline mode I was able to work normally without any occurrence of the "Thunderbird not responding" problem. I have been using this workaround for several days now. I download a number of eamails. I try working in Online mode and I cannot do it. I switch to Offline and work fine. I switch back to Online mode and I don't see the problem any longer for the whole day. Do you have any idea as to the origin of my proble? I am running Thunderbird 115.10.2 64 bit on Windows 11. I had the problem originally using Lenovo T490s and more recenlt Lenovo X1 Yoga

Automatically hide taskbar in desktop mode => Enabled Firefox => Maximised When cursor is moved to outer edge of screen, taskbar should unhide (Expected behaviour) but in this case it remain hidden (Reality). Firefox along with all other spinoffs give same result. Chromium based browser works perfect, and taskbar automatically unhide itself.

As OLED screen have became common as monitor, Taskbar auto-hide is must. If this issue cann't be fixed I may have to change my primary browser which I used for almost 15 years.

Kindly, look into it. If Chromium can do it, why not Firefox.

I am trying to reach an internal company website ([URL]), with a certificate chain rooted in a company certificate authority. This works fine in Chrome, and worked in Firefox on my previous computer. But i recently got a new machine, and something somewhere is not quite right. I get an error message looking like this (between the ~~~s):

~~~ Someone could be trying to impersonate the site and you should not continue.

Web sites prove their identity via certificates. Firefox does not trust [URL] because its certificate issuer is unknown, the certificate is self-signed, or the server is not sending the correct intermediate certificates.

Error code: SEC_ERROR_UNKNOWN_ISSUER

View Certificate ~~~

If i click on the error code, i get these details:

~~~ [URL]

Peer's Certificate issuer is not recognised.

HTTP Strict Transport Security: false HTTP Public Key Pinning: false

Certificate chain:

[certificate]

[certificate]

[certificate]

~~~

If i click 'View Certificate', i get a chain of three certificates:

1. Subject common name = [certificate]
2. Subject common name = [certificate]
3. Subject common name = [certificate]

If i go to Settings > Privacy & Security > View Certificates > Authorities, i can find both the [certificate] certificates. As far as i can tell, they are identical - i can open the certificate from 'View Certificate' and the corresponding one from the certificate manager and flip between tabs, and all the details are the same.

I am using Firefox 120.0, via a flatpak, on Ubuntu 22. I have given the flatpak access to /etc/ssl/certs, where my company's internal CA certificates are located.

To me, this seems like it should all work. The server has a certificate signed by an internal CA, which is signed by another internal CA, and both those internal CA certificates are in my certificate manager. So what is going wrong? Is there any way i can debug this?

Started getting error April 10. I have SSL/TLS and Oauth2 set for Thunderbird account server and smtp. Looked thru lots of web messages - no joy. Via web browser I can connect to my Yahoo email without issue. My gmail account on Thunderbird still works fine (with its unique third party password). I am on current Thunderbird release 115.9.0 (64 bit). I disabled the only add-on that Thunderbird was using. Windows 11 Pro which is up to date. Plenty of open disk space. Have rebooted my PC multiple times.

Looking for suggestions Thanks Bob

Hello,

I just installed the latest release of Mozilla Thunderbird (24.4.0) and I'm trying to create a "Vacation Response". I read on the Mozilla Support site:

Another option is to create a Message Filter and respond to all incoming messages with a template.

(see https://support.mozilla.org/en-US/kb/vacation-response?esab=a&s=out+of+the+office&r=3&as=s )

I've created a template and saved it and then I tried to create a message filter. However there is not an option to "Reply with Template" in the list of choices for the action to perform. I see action choices, for "Copy Message To", "Move Message To" and "Forward Message To", but not "Reply with Template".

Why is it missing and how to I get it to appear?

Thank you for helping.

The Site Notification for Firefox for Android is broken (don't know if it's just me) I have a notification for IGN website but Whenever I click on any site notification I received it always open a " about:blank " page rather than the actual website.

My phone model is ZTE Blade V50 Vita ZTE 8550 Running android 13

Every time I start Thunderbird, I get the "System Integration" notification box even though the "Always perform this check when starting Thunderbird" option is NOT checked. Please let me also clarify, I DO NOT want system integration. Therefore, I have unchecked all boxes that are not greyed out and chose "Skip Integration", since there is not a box for "Do Not Integrate". Can someone please tell me how to stop this aggravating box from continuing to show up, without integrating Thunderbird or resorting to a different email client.

I am running: Operating System: Windows 10 Home Thunderbird: 45.5.0

Recently the email composing function has ceased working in Thunderbird (ver 65.0b3 (32-bit)). Other functionality also recently changed ie clicking the get messages button no longer downloads new messages so we now have to select Get all new messages from the drop down arrow attached to that button. We are only able to type in the email body text area when replying to messages but not when we compose a new message from scratch. The compose new message screen allows us to put in send from and send to as well as type a subject line but doesn't allow us to click in the body text area. If I update the subject line and then tab to try and get to cursor to move to the body text area, all that happens is a dotted line border shows around the body text frame box. I have tried safe mode without addins and removed silverlight but nothing has changed. My wife said she accepted some update a few weeks ago but can't remember what it was for. I will attach a screen shot of the compose page to assist in helping resolve this issue. Thanks

Hi, this issue has been present for a long time for me, and with many versions of Firefox Nightly for Android.

I'm always using the latest nightly for browsing Youtube only, with a set of specific settings and addons (since we can't use profiles on Android yet)

My problem is I've configured the Homepage to never show anything but a few URLs I chose to pin, you can see my settings and my homepage in the screenshots attached.

Despite the "Recently visited" setting being disabled, sometimes, but not everytime, the last pages I visited are added to the Homepage, after the pinned sites. I have no idea what triggers it or not, if I'm doing something wrong or if it's a bug.

Thanks for your help !

Most of the time the new mail sound does not play. I think (not 100% sure), that it does not play when a message is filtered moved.

The sound: - plays when I press the "Play" button in the Options-General. - plays when I send myself an e-mail (it is not filtered). - file is a small 46 KB wav file.

Windows 10 Pro 64 bit. Lots of memory & storage.

I cannot print from Firefox. It worked fine, and then stopped. I'm not sure what changed. It doesn't matter what printer I use. Even printing to PDF fails. No errors appear, and nothing shows up in the printer queue. All the other applications in Windows print just fine. It's just Firefox. And just for this one Windows user.

I tried clearing the saved printer settings in the about:support page. I tried refreshing Firefox. I tried uninstalling and reinstalling Firefox. I tried uninstalling, removing the mozilla folder in %appdata%, and reinstalling Firefox. No luck.

The only time I can get it to print anything is to log into a different user account on this same PC. Printing from Firefox seems to work then.

It seems there is some user-specific printer setting/file/whatever that is messed up. I'm not sure what else to try.

Thanks.

Changed IMAP to POP. Now I have errors, such as "msgFilterRules...Conflict.dat. Deleted all my message filters, but this message STILL pops up.

I also have popstate-1.dat & popstate-2.dat 2 Junk folders, 2 Outboxes..

I have screwed this up somehow....

I am using a message filter to send and auto-reply when I receive a message TO a specific address. Unfortunately it appears that since this address is a mailing list, which is what appears in the FROM field, the auto-reply is trying to send to the mailing list rather than the original sender and is failing.

The filter itself is simple... To contains <mailing list address>, reply with template (chose the correct template from the drop-down). The error message is:

[01/16/2018 03:46:11 PM] Filter Action Failed: "Sending reply aborted" with error code=0x80004004 while attempting: Applied filter "Template Subject" to message from "Sender Name" <mailing list address> - <Subject> at 01/16/2018 03:45:57 PM replied

Thunderbird 52.4.0 (64-bit) on debian. Is there a way to specify that I want to reply to sender rather than than the list, similar to the options I have when manually responding to one of these messages? For example, the Reply-To field contains the original sender's email address, but the From field contains a combination of the sender's name and the mailing list address.

Thanks in advance.

I have recently added a Microsoft exchange account to Thunderbird. I am able to connect to and receive emails through imap, but I cannot send emails. The error I get is a 'Login Failed' error with the message 'Login to server smtp-mail.outlook.com failed.' but I have double checked that my login information is correct (and reset my password and tried again). I can also happily send emails from the webmail and from a desktop copy of Outlook. I have tried all the suggestions in the 'Cannot send messages' troubleshooting article with no success.

My outgoing server settings are:

Server Name: smtp-mail.outlook.com

Port: 587

Authentication method: Normal password

Connection Security: STARTTLS

This is a Microsoft Exchange email, I am running Thunderbird 52.9.1 on Windows 10. Any suggestions on what the problem might be?

Having trouble with my Charter Spectrum mail account. I am able to receive e-mails, but cannot send them. When I send a mail, I get the "Login to server mobile.charter.net failed" message. However, I believe I have the correct setting for SMTP server. Charter Spectrum says I should have mobile.charter.net set as the SMTP server, port 587 selected, SSL enabled, and the authentication password should be the same as my IMAP incoming for the account.

So when I get this message about login to server failed - I re-enter the same account password, and get the same message result. Why would I be able to receive e-mails, but not send using the same server and password?

I was able to go onto Charter Spectrum website and login and send and receive e-mails from their web mail app. Although, I hate using it, and would much rather use TBird.

Thanks in advance. C.Bariou

When I click on account setting I get a small box labeled account settings with one button with a drop down arrow which works and gives a selection of: Add an account mail account, add chat account, add feed account,add other account or remove account. I cannot see any other settings

Hello, After update Thunderbird quick filter became very very slow.

If you type in quick filter field two words. At the beginning is being shown random results not connected with typed in words. Then in 30 seconds or later are being loaded correct results. Not possible to use like this. It's local search on normal PC (with CPU AMD Ryzen 5 PRO 4650G, 24GB RAM) filtering must to work fast. Could you fix that issue?

Thank you

Yesterday I upgraded Thunderbird from version 30 to 31, now while I writing messages the autocomplete for addresses is extremly slow to suggest contacts. If I enter only a letter in the destination field, thunderbird hangs for about twenty seconds and after show me the suggestions. Typing two letters quickly, thunderbird hangs for 13 seconds. typing 3 after 6 seconds All tested even in safe mode I have a local address book with about 9870 contacts (no remote address book) and before the upgrade everything worked fine

When I send a message, I want it to go to SENT folder on IMAP server and stay there, so that I can have a copy of that same message sync'ed to my cell phone.

But I also want "A Copy" in my local folders. That way, when my server deletes all messages that are X days old (part of normal server maintenance), I will still have the original message saved locally on my computer.

Problem is: 1. when I configure Copies and Folders and "uncheck" the "when sending a message place a copy in" setting, it doesnt save the message anywhere. 2. when I configure it with "check" the "when sending a message place a copy in" setting, with the folder name on the IMAP server, it stores it only there 3. when I configure it with check" the "when sending a message place a copy in" setting, with the local folder nameit stores it only there

I would have thought that when sending a message, it would would always be placed in the IMAP server "sent" folder by default (since i am... ummmm... "sending" the message)... and then when I check the "when sending a message place a copy in" setting, it will save a COPY (ie: a 2nd instance of the message) to whatever other folder I select.

But it doesnt do that.

So how do I configure TB to do that... put a copy of the sent message in the IMAP server "Sent Items" folder, and a COPY of that same message, elsewhere?

thanks!