Форум поддержки Все продукты

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

Sadly, my old Windows 10 PC crashed, and I'm migrating to a new computer. I have a backup of the old default profile folder (9k7faw1z.default), but not of the entire Profiles folder. I have tried to import this old default profile using the import function in my new Thunderbird install on my new Windows 11 computer.

Alas, I get the error message "Import failed unexpectedly; more information may be available in the Error Console." I looked in the error console, and it's empty.

Is there a better way to import my old data from my old default profile folder? It's 3GB of valuable data and I'll be in a pickle if I can't access it.

Thanks very much.

I have an iMac with Sonoma 14.3.1 with Firefox 115.9.1 esr . It is for personal use, not for a business. I just learned that there is another Firefox version (124.0.2) which is not esr....

Which version should I use and why?

If I should use the "normal" version, how do I replace the esr version with the "normal" one ?

Thanks.

After just turning on my computer running Windows 10, I opened Firefox. I open 1 web site and noticed my computer showed a (16) prefix when loading Firefox. I opened the Task Manager and it showed that there were 15 instances of "firefox" running in the background. All showed a UAC Virtulization of "Disabled". But they also showed using 638.8MB of memory. I do not know whether these are necessary files that must run in the background or if the number of files indicates that my system has been hacked and someone else is in my system from outside. Any suggestions as to validity of these files running or how I might confirm that they should be running. I have noticed the number of excessive background files before but the number is never consistent which makes me fear I may have been hacked.

This has been happening for months now, on multiple devices (I have tried at least 3 different devices), and on multiple networks.

I have read the articles in here, but they just want me to check network configuration which is exactly the same for all browsers.

If I restart firefox it starts working again.

How can I prevent it from breaking randomly? This is the only browser having issues, I'm almost positive is some bug and not a configuration thing, given that it happens under multiple circumstances and devices, while Edge and Chrome simply keep working just fine.

There is no consistent repro I can give, afaik it is just random, at some point Firefox just decides to stop working and I have to restart it. This disrupts my work and browsing activities as I can lose progress on input forms and similar actions.

I've had an ongoing issue with Firefox now for several months since upgrading to windows 11. When I try to copy text, or images, url's or anything really that is supposed to go to the clipboard, it copies a blank text with no data instead. I can copy text and images from other programs and even paste them into text fields on Firefox but I can't copy from Firefox to anything else and it's frustrating.

I recently got forced into upgrading Outlook in windows and hated it so I started using Thunderbird and surprisingly, I have the exact same issue there as well.

I have tried: Running Firefox in safe mode (Shift + Left Click) Resetting Firefox Switching Back to default themes Disabling hardware acceleration Updating to the latest Beta Build (v126) Running Firefox Developer edition

I really want to get this fixed and working, I don't want to have to switch to another browser =/.

Hi so am using version 125.0.1 and on my windows 10 machine I can add custom Search Shortcuts (the Add button is present) but on my windows 11 machine, the same settings page the Add button is dissapeared... Is it a limitation for Windows 11 machines?

When I answer an email TB adds Re: (or Fwd: ) in the subject line which I have laways found annoying. My previous email client allwed me not to have this happen. Is it possible to stop this?

It is possible I have asked this previously, but if so, I cannot find this and have received no replies. My apologies if I have!

Hello,

I have encountered a recurring issue specifically with Firefox where SVG images fail to display unless a pixel-defined height attribute is explicitly set. This behavior contrasts with other browsers, which handle SVG scaling seamlessly, typically adapting to the specified width or inheriting dimensions from parent elements.

During our website development, primarily through Elementor and leveraging Flexbox in a WordPress environment, this discrepancy becomes evident. The issue persists exclusively in Firefox, confirmed through extensive testing across various browsers and OS's with multiple SVG files and sites.

For diagnostic purposes, I recommend conducting controlled tests with SVG images embedded with our current setup. Set the SVGs to 100% width without defining their height and observe how they render in Firefox compared to other browsers. This should help ascertain whether the behavior in Firefox is anomalous.

I am assuming it may be with the way the markup of the SVG is rendered as it doesn't happen with all SVGs, however, other browsers appear to fix or override whatever is getting in the way from rendering...it is a strange issue.

I have included two images as an example. As you can see in the first image, the SVG isn't rendering (in Firefox) , but does render in Chrome/Safari. It only works when I define a height in px value on Firefox.

Please let me know if further information is required or if any specific steps need to be undertaken to address this issue.

Thank you.

Dear Sirs,

I have a common layout for folders. If I create a new folder, Thunderbird 115.10.1 (and previous versions) always uses a different layout. Sometimes I forget to change the layout and when opening the newly created folder I am confused. I find it also annoying to always apply my folder layout to the newly created folders.

Is there any method/setting to define/set the layout for new folders?

Kind regards,

Jens

https://tasmota.github.io/install/ This is an example of what i am tryingto achieve bit no matter on which site i am , i do not get to choose from ports and my devices and always faults out saying similar messages that the browser does not support web serial in one way or the other for any site doing similar task. error message is as shown in the image shared basically complains of browser not supporting web serial.

Title. Thunderbird is a really cool client but it's pretty slow. I blame that on the thousands upon thousands of emails that my hotmail and gmail each hold. I don't necessarily want to delete these emails, but I have seldom a reason to have any email older than 2 months in my thunderbird client slowing and crashing the program whenever I want to combine inboxes.

To this end I went to "Synchronization & Storage" and told it to "Synchronize the most recent 2 months" but it didn't delete the huge cluster of older emails. The next option is to tell TB to delete these emails in the same menu but as I understand it that would also delete them in the server, which I don't want to do for posteriority.

What do I do?

When I print an email, TB prints all of this technical jargon such as X-MS-Exchange lines, and what seems to be the background handshake protocols behind the email. I just want the contents of the email printed. May I ask how I fix this, please?

Recently on my iPad and iPhone, clicking valid links in either my browser (Firefox) or e-mail (Outlook), a new tab will open to the “about:blank” page, and nothing more.

The latest version of firefox for MacOS 14.4.1 has broken the picture in picture function. When enabling PiP, the video window takes up almost the entire screen and doesn't remember the size i set it to, like it did in older versions of Firefox. Another issue is when im in fullscreen mode and enable PiP, the PiP window takes me to another 'desktop', whereas before it would simply overlay on top of my screen.

I installed an OBS plug-in for a virtual camera so that I could film my screen and pretend it's a webcam. I was able to use the virtual camera or my webcam on spelltable.com by selecting either from the dropdown "allow" menu. One day, I was no longer able to select my webcam. I could only select the obs virtual camera. I switched to MS Edge which worked as normal. I've uninstalled OBS and all plug-ins. Same result I've reinstalled firefox. Same result. I've been using MS Edge for websites that need my camera.

I am running Thunderbird on Linux Fedora. I have two accounts set up. One of them is an icloud account. Every day, many times per day, it prompts for password. I have a nightmare to get one for it due to the new way Apple deals with stuff like this. I have to get an 'App Specific Password', which involves logging in, which I hate doing and doesn't work because I use a VPN and Apple discriminates against VPN users and locks my account every time i login (even though it's the same IP address every time).

I did manage to generate one, which got rid of the problem for a day or two, then it came back, generated again, and so I go around, each time having to unlock icloud account, remove old password, generate a new one, paste it into TB and then its fine for a few hours/days.

Would be very grateful for any ideas why this is happening and how to cure it.

thanks

when I search for a page after opening a tab. The page will load slowly then stop. I'll then have to hit enter again for the page the load. This does not happen with Chrome or Edge. Any ideas how to fix this frustrating issue. Thanks.