Pytania oznaczone etykietą: Pokaż wszystkie pytania

How can I hermetically segregate my multiple Microsoft accounts into different tab containers?

I am a consultant and I have, typically, about 2-3 clients ongoing at any one time. These clients, inevitably, each assign me a Microsoft 365 userid. I also have my own p… (czytaj dalej)

I am a consultant and I have, typically, about 2-3 clients ongoing at any one time. These clients, inevitably, each assign me a Microsoft 365 userid. I also have my own personal Microsoft 365 userid.

Unfortunately, given Microsoft's fairly aggressive attempts to "capture" my attention, it has "remembered" each and every one of these accounts, and it sort of tries to log me in all the time with the wrong account into different clients' Office 365 online platforms. So I sometimes find myself sending external mails from the wrong accounts etc. It really is a mess, because then certain O365 "policies" from one account, prevent another account from logging in, for example, creating what I suspect is an almighty spaghetti bunfight of clashing Microsoft properties in my browser.

So I thought I'd assign each client their own container, and using the multi-account container addin, I though this would segregate the accounts, by setting it up automatically to open my different client O365 bookmarks in different colour-coded containers.

Unfortunately this not seem to keep Microsoft in check. It seems to be able to "see" other MS logins across containers, because a few hours ago I experienced a situation where in Client A's container, Microsoft decided that I should be logged out and logged back in with Client B, for some unknown reason, probably because I had logged in as Client B in another container tab. But this doesn't seem to happen all the time. I can't pin down exactly when it happens. Microsoft is basically able to see across my containers, it appears.

Is there any way to keep each Microsoft account where it belongs, namely strictly inside the container tab I have assigned each to? Facebook style? With a nice high unclimbable fence?

Asked by nicercat 5 godzin temu

Remove bookmark editor dialog

Hello, Is there a way to completely remove the bookmark editor? I have it configured to not show when adding a bookmark and would like to not see it when removing it. Th… (czytaj dalej)

Hello,

Is there a way to completely remove the bookmark editor? I have it configured to not show when adding a bookmark and would like to not see it when removing it. The button in the addres bar should toggle between add/remove with no ui.

Regards.

Asked by jlwally 1 tydzień temu

Last reply by jlwally 1 tydzień temu

Very Large Font on first page of Google search hit.

When I put something in the search box it comes back with a Google Search 'hit' page and it always has enormous text, an enormous font. I can't get rid of it. It started … (czytaj dalej)

When I put something in the search box it comes back with a Google Search 'hit' page and it always has enormous text, an enormous font. I can't get rid of it. It started after one day I couldn't read a tiny text on a page so i googled for help and got some keystrokes for increasing font size. i forget what they were but they worked fine. But now I can't get rid of it. On all other pages, yes, no problem. I found keypresses that are supposed to get rid of large font: ctrl-z, ctrl-y, different ones different places say, I"ve tried them all, but can't get rid of the big font on the first page of a google hit. I am using firefox of course. On a linux mint machine.

Asked by abrogard 15 godzin temu

Last reply by petergroft 12 godzin temu

  • Rozwiązane

Unicode Missing Characters

Expected: Firefox displaying all known Unicode characters. Result: Many characters missing. Failure page as an example: https://en.wikipedia.org/wiki/Religious_and_poli… (czytaj dalej)

Expected: Firefox displaying all known Unicode characters.

Result: Many characters missing.

Failure page as an example: https://en.wikipedia.org/wiki/Religious_and_political_symbols_in_Unicode

Description: I tried going through a Unicode list Unicode list and the extensive set of characters displayed correctly. However, when reaching further into character sets as shown in the failure page page, many are missing which are not new.

  • "Repair encoding. . ." button was not active.
  • An encoding switch extension was not able to resolve the issue.
  • Troubleshooting mode did not show changes.
  • Switched fronts available such as Noto Sans and Roboto Sans without success. Possibly a font failure?

Asked by mistry01 1 dzień temu

Answered by cor-el 22 godziny temu

Is it a bug when GPU on Windows takes 2-3GB?

Sometimes, usually, when I watch YouTube, I could see in the Process Manager (about:processes) that GPU process takes 2-3 GB. YouTube could be open in multiple tabs, bu… (czytaj dalej)

Sometimes, usually, when I watch YouTube, I could see in the Process Manager (about:processes) that GPU process takes 2-3 GB. YouTube could be open in multiple tabs, but I watch only in one tab. All other YouTubes have been stopped. (I have always the latest version of Firefox. ) Is it a bug? Maybe disable hardware acceleration?

Asked by YDUBINSKY 23 godziny temu

  • Rozwiązane

glxtest: failed to read data from glxtest

Beginning with 111 when I start I get 'glxtest: failed to read data from glxtest, we may fall back to software rendering.' It works. I don't know that anything bad is h… (czytaj dalej)

Beginning with 111 when I start I get 'glxtest: failed to read data from glxtest, we may fall back to software rendering.' It works. I don't know that anything bad is happening.

Asked by RandomTroll 1 dzień temu

Answered by TyDraniu 1 dzień temu

I lost my bookmarks and saved logins

Just now I recreated my firefox login password and re-logged into the firefox account. After synchronization, I did not find my bookmarks and saved logins. Could you ple… (czytaj dalej)

Just now I recreated my firefox login password and re-logged into the firefox account. After synchronization, I did not find my bookmarks and saved logins. Could you please help me troubleshoot the problem? Firefox Verison: Desktop: Firefox 102.9.0esr(64Bit) Debian 11 Mobile: Firefox Nightly 113.0a1(Build #2015940355), 77b44afdeb+ GV:113.0a1-20230322094136 AS:97.2.0 Android 13

Asked by aworking1115 1 dzień temu

Unable to login - Invalid authorization key or 2FA codes or tried too many times

TL;DR: I ended up with 2FA disabled and recovery key enabled Hello people ! I'm currently testing Firefox Account features such bookmark syncing and its login secu… (czytaj dalej)

TL;DR: I ended up with 2FA disabled and recovery key enabled

Hello people !

I'm currently testing Firefox Account features such bookmark syncing and its login security (not password storage/sync). Unfortunately I'm having big trouble authenticating myself to the service right now.

I have 2 testing accounts with the following configuration :

  1. I've setup 2FA authentication.
  2. I did not set a secondary email.
  3. I did not set an account recovery key.

Here are some of the tests I'm doing :

  1. I start by doing several login/logout to check if 2FA is working as expected.
  2. Then I add a secondary email then make it primary then remove the previous primary email.
  3. Then again login/logout several times to check if 2FA is working as expected.

At some point I'm unable to login after some iterations of step 3) above.

  1. At first I get an error saying my 2FA code is incorrect. But it allows me to login successfully using one of my 2FA backup.
  2. Then again I logout/login several times to check if 2FA is working as it should be.
  3. Then at some point I get the same error again saying my 2FA code is incorrect. Trying several unused 2FA backup fails with error saying they're also incorrect.
  4. Then it finally says that I've tried too many time and suggests I should retry 15mins later.
  5. When I try to login after some time it then ask me for an authorization code sent to my email. But then it says every authorization code I try is also incorrect.
  6. I managed to disable 2FA from on one of the account I was still logged in Firefox. But when trying to login on another Firefox profile then I get the same error saying I tried too many times.

Just for clarification - Please note that I may have use one or two 2FA codes instead of authorization keys when it asked me so. But I did not mistyped any 2FA or auth code I've tried.

And after several hours of giving up on it - the problem suddenly vanished and I could login/logout fine. As a precaution I add a recovery key and decided to disable 2FA because I can be sure it will work as is should.

Maybe I get locked but I dont know what really happened. I believe I did not a lot of login abuse though. I just feel like it's a big issue for my case because I could not rely on the 2FA backup and authorization keys. The error didn't help either because it likely says I've been locked. Whereas having one or two mistyped codes or using "several correct 2FA backup and auth keys" which were wrongly considered incorrect - should not be treated as a login abuse or brute force.

From now on I will likely disable 2FA if using this service. I understand these tests are not things you do on everyday use but I can't imagine how bad it would feel if I have sync sensitive data such as passwords and have to wait hours to unlock access to my account (even if not to access those data).

Asked by webheatsandwich 1 dzień temu

Last reply by webheatsandwich 1 dzień temu

access to mewe.com via linux.ubuntu & firfox

I use Linux / ubuntu , with firefox ..when I tried to connect to my profile at mewe.com i got this.. " Your browser is not supported. We cannot provide a good experien… (czytaj dalej)

I use Linux / ubuntu , with firefox ..when I tried to connect to my profile at mewe.com i got this..

" Your browser is not supported.

We cannot provide a good experience to your browser. To use this site, please upgrade to the latest version of Chrome, Firefox, Safari, Edge or some other modern browser."

i dont want and have had problems with chrome./.. so can u help, please?

Asked by ngo12347 1 dzień temu

Last reply by cor-el 1 dzień temu

Website getting pinned automatically on Firefox Ubuntu

A certain website (flixbus.com) is getting pinned on my firefox automatically. I have unpinned it several times but after few seconds, it gets pinned again. It's driving … (czytaj dalej)

A certain website (flixbus.com) is getting pinned on my firefox automatically. I have unpinned it several times but after few seconds, it gets pinned again. It's driving me nuts. I even cleared all my cookies but it didn't help.

Asked by bhavishya.goel 1 dzień temu

problem trying to download DEB file(s) from Xerox website

The file you are supposed to download on page "https://www.support.xerox.com/en-us/content/146849" gives a webpage with trash, where it should open the download window . … (czytaj dalej)

The file you are supposed to download on page "https://www.support.xerox.com/en-us/content/146849" gives a webpage with trash, where it should open the download window . I know it's Firefox because I tried downloading that file via Opera browser and that succeeded . Dowloading zip files from the Xerox website gave no problem, only DEB files .

Asked by brucor53+mozilla 1 dzień temu

  • Rozwiązane

Video error in multiple pages on Linux KDE neon

Hi, I can't play some videos in YouTube and other platforms like Crunchyrroll, Twitter or Vimeo, I've already cleaned the cache and deactivated all the plugins and there … (czytaj dalej)

Hi, I can't play some videos in YouTube and other platforms like Crunchyrroll, Twitter or Vimeo, I've already cleaned the cache and deactivated all the plugins and there is no difference.

Asked by cebeoc 2 dni temu

Answered by cebeoc 1 dzień temu

  • Rozwiązane

Flashing video on https://abcnews.go.com/

Hi, I have noticed that when using the latest release of Mozilla Firefox on Windows 10 and Ubuntu 22.04 LTS, when I go to ABCnews.go.com and click into a story, there is… (czytaj dalej)

Hi, I have noticed that when using the latest release of Mozilla Firefox on Windows 10 and Ubuntu 22.04 LTS, when I go to ABCnews.go.com and click into a story, there is an autostarting video. But instead of either waiting until I click on it or autostarting normally, it flashes wildly. I have disabled all extensions and the problem persists. Has anyone else encountered this? And more importantly, does anyone have a fix for this issue?

Bob Reed

Asked by neutronJK 6 dni temu

Answered by jonzn4SUSE 1 dzień temu

Plasma-Browser-Integration doesn't work

I have the plasma browser integration extension and the corresponding package for my distro. But it doesn't work and I get the "failed to connect to native host" message.… (czytaj dalej)

I have the plasma browser integration extension and the corresponding package for my distro. But it doesn't work and I get the "failed to connect to native host" message. Am I doing something wrong? I use: KDE neon 5.27 KDE plasma version: 5.27.3 Firefox edition 111.0, Mozilla Firefox for Ubuntu Thanks in advance!

Asked by mxprasinos 3 dni temu

Last reply by jonzn4SUSE 1 dzień temu

Pointer doesn't change shape unless clicking in an option.

Hello, For some reason I got a new laptop and install the latest firefox version, however, very often happens that my pointer doesn't change according to the options I … (czytaj dalej)

Hello,

For some reason I got a new laptop and install the latest firefox version, however, very often happens that my pointer doesn't change according to the options I am selecting (unless I click on them). To fix it, I have to restart the browser every time. It's annoying because for example, if I select some text to copy it, it will not be highlighted until I finish (unclick), just until then it will highlight the text, but not during the process. Also, the wheel of my mouse won't scroll the page up and down when clicking at it (but I still can scroll without clicking it). All these issues get fixed once I restart the whole browser.

Any ideas? do you think by downgrading firefox this could be fixed?

Best regards, Cristhian Garcia.

Asked by gqcristhian 3 dni temu

Last reply by jonzn4SUSE 1 dzień temu

Firefox can't establish connection to websocket, fixed after restart

Hi, I've been having problems with my Firefox. After some time (~1 day?) all websocket connections stop working until I restart the browser. In JS console I can see "Fire… (czytaj dalej)

Hi, I've been having problems with my Firefox. After some time (~1 day?) all websocket connections stop working until I restart the browser. In JS console I can see "Firefox can't establish connection to ws://..." (or wss://).

This really affects all pages, for example Discord, Onshape, Jupyter notebook, and 100% gets fixed when FF is restarted.

I'm looking mostly for some debugging tips. So far I've tried increasing `network.websocket.max-connections` from 200 to 500, without any luck. I have also tried to examine some pages for open websockets using developer tools, but didn't find anything suspicious.

I'm running version 110.0.1 built on Gentoo, but this issue has been with me for couple versions already. I have a few extensions, including uBlock origin and leechblock, approximately 100-200 open tabs in 4-5 windows at all times. Restarting firefox every day is not the worst, but I'd definitely prefer to not have to do that

Asked by blue.cube 2 dni temu