Alle produkter Support Forum

is there any way i can roll back the most recent firefox update? i updated firefox on june 12th and ever since than, i can not use firefox or open any tabs due to it continuously crashing over and over with no recovery. it is so bad that i had to go to microsoft edge just to report this problem, because i can not get firefox to open anything beyong my homepage without crashing the tabs. please email me at gnralee01@yahoo.com this is infuriating and i have to now use microsoft edge for my browsing because i can not use firefox until you fix this. i have uninstalled and reinstalled firefox 3 seperate times and i still get the same results. firefox worked great prior to the june 12th update.

I've posted before but no answer as to why Firefox labels Paypal as an unsafe site. I don't know where to change settings to allow it without the warning. I've just ignored the warning and continued but it is annoying.

https://ktla.com/on-air/live-streaming/

Every other browser works fine. This one stopped dead on Win10 and Android9. It wont stream even in safe and my Android has no add ons

Greetings support team. The problem is a bit complicated and I could't find anything similar to it on the net, so I'll try to explain in details what happened. One day after opening the browser I noticed that it didn't launch(there was no window). After opening it again I saw that all of my previously opened tabs were gone. After that I closed Firefox and went to check the task manager. I found that Firefox was still running after closing it. I couldn't wrap my head around it and killed the programm. Then I opened it again and got the same results: first launch: no Firefox window(nothing on the taskbar either), secound launch: one empty tab. After that I opened a new tab in Firefox through task manager and my screen "swiped right", I got access to Firefox window with all of my previous tabs, but all the other programms I had opened on the taskbar were gone. Somehow Firefox opens outside my screen on a "separate one" every first time I launch the app, and the only way to switch between "screens" is to open a new tab through task manager or launch a program that was previously active to switch back to previous "screen". It is also impossible to switch between opened windows on different "screens" using gestures on the touchpad or "Alt" + "Tab". I use a laptop and never even tried to attach/connect a second monitor. I don't have another monitor attached via bluetooth or any other means in device manager. I have the latest verion of windows 10 installed and updated. I have another PC, where I use the same Firefox with the same addons on the same Mozilla account, which has no such issues. I have tried renaming the file called "xulstore.json" to "xulstore.old" or deleting it entirely, this didn't resolve the issue.

For the last few months Firefox has released a stable version and a matching ESR version for OS's that are no longer supported. Firefox stable version had a major monthly release and a minor update as needed. For the next release scheduled in July I see a stable version of 128.0 with two matching ESR versions. I'm trying to understand the difference between the two ESR versions. The two versions advertised as ESRs are 128.0 + 115.13.

https://whattrainisitnow.com/calendar/

Thanks.

Today for the first time after the latest update 127.0 (64-bit), my many firefox pages and tabs crashed and closed and a pop up to send crash report.

So I have fired up firefox again to find only a single page opens up, I have lost probably 16+ pages with multiple tabs on each, been like that for months, I have 32GB memory so there is normally no issues or slowness. However after the crash, even though only a single firefox page is open, windows task manager shows Firefox (20) and if I expand the task, I can see each firefox is taking lots of memory.

So it looks like the old session pages/tabs are still there somewhere but not accessible, I would like to get them back if possible. I went through reseting it to default, disabling the add ons etc but nothing has worked.

I want to create a link in the bookmarks toolbar to easy check and update firefox In chrome I can do that with creating a bookmark to: chrome://settings/help In edge I can do that with creating a bookmark to: edge://settings/help I have search for, but cannot find the equivalent in firefox

How to sort and view history by date in firefox? if we go to the history tab it automatically sorts by creating sections of , "today","yesterday" and then directly for "last 7 days" that too doesnt have the exact date. how can i exactly view the data of a particular date past yesterday?

Is it possible to install Firefox (or at least the profiles) onto an external SSD (i.e., not the C: drive)? If so, how?

Note: this is not about migration/backup/recovery of profiles. Nor is it about where files are downloaded by default.

Windows 11 is consuming nearly all of the C: drive. I badly need to get Firefox (and later Thunderbird) onto my E: drive. I further note that the installer gives no options whatsoever as to the destination drive.

Most of the help I've found on the web is clearly outdated.

Thanks. jt

I have the strangest problem. If Firefox is closed and I do a speedtest in another browser, download a file, or do other internet activity I'm getting about 200-250Mbps d/l and 100Mbps upload. As soon as I open Firefox, whether I load a page or not, the upload speed stays the same, however the download speed drops to about 25-50 Mbps. This only happens on one PC, the upload isn't affected, and resolves itself as soon as Firefox is closed. Here's what I have done without any change in this behaviour;

• Rebooted
• ipconfig /release /renew /flushdns
• Removed and reinstalled the network adapter
• Enabled, disabled windows auto tuning and tested (slower disabled)
• Updated Windows
• Refreshed Firefox
• Uninstalled Firefox, deleted remaining folders from Appdata (Local, Low, Roaming) as well as the program file directories and "Mozilla" registry entries. Restarted and reinstalled. Issue immediately resumed when Firefox was open.

Also when connected to a VPN Firefox download speed increases to about 60Mbps and is consistent across other software. If I split tunnel another browser outside the VPN, it is still stuck at 60Mbps. If I close Firefox the speed increases.

This makes absolutely no sense to me, so I'm hoping someone can shed some light on this - but it does seem to be something Firefox is doing.

Thanks for any help anyone can provide.

Hello. I am not familiar with this end to end encryption that Facebook now does for Messenger but now when I try to use Video Calling/Chat it tells me it is not supported by my browser, Firefox. I have never had any problems with it before. Is there a fix? Thanks

Hi

I just clicked on my Firefox to open it and was met with a new update tab, and all my tabs had disappeared, which I have had happen to me in the past and ended up losing everything after closing Firefox and reopening it again.

So with that in mind I went to History and everything was greyed out, and so had no option but to close my browser, thinking that maybe that it had opened that one to tell me about the update and if I reopened it all my tabs would be there. Is there anyway I can retrieve all my tabs?.

Thanks

In previous versions I was able to open around 15-20 tabs before X button disappeared from them and I was no longer able to close them without activating them first.

Now this happens much earlier - only 10 tabs is enough on my 1080p 100% scaling desktop and 9 tabs on my 1080p 125% notebook.

X button is present if you have 10 tabs or less, but disappears with 11 tabs, when there is still plenty of space on tabs to click on X!

I compared it to brave and in brave you can still have 22 tabs opened before X button disappears!

Anyone has any method to force presence of x button? This is really annoying as I often have much tabs open and close only 2-3 of them. Now I have to open each one again to be able to close it.

We have a W10 workgroup using an unmanaged switch to hook 5 PC's together through hardwire ethernet. The switch is also the access point to the internet "modem".

I would like to cause the PCs to use wifi to access the modem ONLY for internet and Thunderbird, with the workgroup remaining on the wired system.

With both "networks" enabled in W10 the PCs are automatically defaulting to whichever method was enabled 1st. I have no idea how or if I can "split" the flow and cause FF and Tbird ONLY to use wifi.

Even though I have browser.privateWindowSeparation.enabled set on "false", private windows appear separate regardless and it is bothering me. I restarted my browser, logged out and then back in, toggled the setting on and off again, but the damn thing stays in this uncomfortable spot that would be awkward to explain as opposed to simply having it blend in with the other windows innocuously. How do I fix this?

The icon for private browsing has recently re-appeared on my taskbar despite having browser.privateWindowSeparation.enabled set to false in about:config.

I've had this setting configured ever since the update which completely changed the appearance/behavior or private browsing and it has worked correctly up until today (14/06/24).

Is there a new setting that I have to adjust in order to "merge" the windows together as I'm not a fan of having the private browsing icon on my taskbar.

When I open my emails, I get an automatic default to email REPLY. I cannot open my emails for reading and attachments. Also, I no longer get the time of the email listed. How do I restore my settings?

Hi there,

I'd like to know if there is a way to remove firefox relay from the context menu, as per screenshot. I really like the relay icon on the email fields, but I don't want it to show on the context menu and I found no such option on the relay extension. Is there a solution to this?

Thank you

Nightly updated this morning and the help menu from the sandwich has stopped working. The menu options display, but none of them function. Mouse click makes the menu disappear as if it's going to show the panel attached to the option.

Version: 129.0a1 Build: 20240613093628

Hi, how can I zoom in and out on websites without changing any display or layout? For example, on some sites, zooming changes the layout of the text so that it all fits on the screen. Or zooming on some sites doesn't affect the size of the images, only the text. How can I zoom in so as to see the page in its original layout but with a wider view, thus preserving the scales of all the elements (as if I were zooming in on a picture) ? (in the screen below, zooming change the relative scale of the elements) Thank you for your help.