Firefox Community Forum

After upgrading to fedora 40, firefox just takes ages to boot up, even when it's running if I want to open a new window it still takes ages to run. I have tried uninstalling it and deleting it's data but with no luck. The issue still presists.

After a recent change of my website's name registrar, Firefox (both on Linux and Android) has been running into issues finding the server/address. I suspect this has something to do with DNS, whether it be DNS over HTTPS (DoH) or otherwise.

Specifically, this seems to happen when DoH is on (as shown by about:preferences#privacy). I have confirmed that `curl --doh-url <cloudflare DNS query> <my website>` also fails to resolve the request.

This leaves me with a few outstanding questions:

• Do I have any control of whether the DoH request fails? Is this something I can fix through my host or name registrar?
• The TRR mode shown in about:preferences#privacy appears to be different than the one shown in about:config (2 versus 0, respectively).
• Shouldn't Firefox be falling back to normal DNS? I have confirmed via `curl` that my website works fine over https.

Firefox and curl results for Linux confirmed on two machines on the same network.

After an update of ubuntu 22 on my computer, Firefox does not render properly (see the screenshot of my desktop). I have tried to reinstall it but it continues to happen. All the other programs works fine, it is only firefox.

My system is: Ubuntu 22.04.2 LTS Processor: AMD Rysen 5 3600 6 core procesor x 12 Graphics: AMD Radeon rx 5500 tx

Thanks.

Hello, I am running Ubuntu 22.04 (Firefox v 121.0) on a custom PC. Ryzen 5700G, 32GB Ram, 2TB Storage, and a Radeon RX 580 (just to give some insight into the system in case it is useful). I use multiple mozilla services and haven't had many issues up until now. Everytime I open Firefox it immediately it fires right up, the moment I try to open a tab, search, etc.. it begins to lag. It will then freeze the browser and my entire PC soon follows suit. I have had to hard reset the PC about 3 times now. I originally had the snap version installed and thought that installing the deb package would fix the issue. I completely uninstalled the snap version and turned off unattended installations in case the system tried to reinstall the snap. I then installed the deb package and fired it up again, only to have the same issue. I have ruled out a couple of things on my end. I entered Firefox Safe Mode and unchecked all of my extensions (the only ones I run are Ublock, Bitwarden, and Relay). I ran a mem test and have been monitoring Psensor to ensure the CPU wasn't overheating (both of these tests were fine). I also scanned my entire PC to ensure I did not have any viruses (clamscan reported no viruses). I have been running my PC for about an hour now without starting Firefox and using Chrome, and I have had no issues with freezing or anything similar to what happened with Firefox. Not sure where to go from here. I love using Firefox and would love to get back to surfing as soon as possible! Any tips/help would be greatly appreciated! PS I could not find any logs about the session. I looked in ~/.mozilla/firefox/Crash Reports/events and couldn't find anything. If there is another place they are stored let me know and I would be happy to send them. I just don't want to open Firefox until I feel it is safe for my PC.

I forgot to add: I disabled hardware acceleration as well, did not fix the issue.

Hello, in past versions of Firefox, I was able to follow the steps on this page to set a custom HTML file on my PC as my home page for new tabs: https://peterries.net/blog/firefox-ubuntu-local-file/

I have Firefox 107.0.1 now and it's not happening. When I open the browser from scratch, I see my custom home page file. But when I open a new tab, I just see a blank screen. If I then click the Home icon on the toolbar, I do see my custom HTML page, but I don't want to have to click that button for each new tab.

Right now, in my settings, I have the URL to the page set as the custom URL for the HTML fiile, like this:

file:///home/peter/Documents/homepage/peter-home-homepage.html

That works. And I also have followed the steps on that blog post to customize my /usr/lib/firefox/autoconfig.cfg and my ../firefox/defalults/pref/autoconfig.js files. That's no longer working.

Did something in a recent version change? Is this no longer supported? Thanks for any ideas!

I want to disable notifications when a download is finished, however the key in about:config 'browser.download.manager.showAlertOnComplete' does not exist any more. Is there some other way to disable these notifications?

Hi all, I use to update Firefox with my Linux distribution package: I build the new package then upgrade it on the system. Anytime at the first launch of the new Firefox just installed version, it opens a new blank profile instead of my usual profile. I can set my usual profile as default by launch Firefox Profile Manager. So after update I launch from command line terminal or through launcher bar:

firefox -p

And It starts up profile manager, then I choose my usual profile and check it as default one. After that, when I open Firefox again, it uses my usual profile as expected.

Now the question: - is there a way to automate this procedure so I have not to repeat it anytime after I update the browser?

PS. I noticed my "profiles.ini" file is populated with a lot of profiles sections, likely maybe anytime I update, a new one is added in here. I don't know if it is a regular behavior or not.

I want to navigate on search results using the keyboard. I could use tab but it suggests all interactive elements such as news, images, books, videos, search settings and etc one by one. I want to press something and make active first result, then second. If such hotkeys are not provided, maybe there are any extensions with similar functionality?

Hi all :)

From a fresh Linux Debian Bullseye I try to connect to a local machine with Firefox (v97 64-bits) by its hostname (avahi server with default domain "local") with the port 6180 bound to a remote web service port (61 is the distant machine IP and 80 is the forwarded port).

When I want to open this URL : http://bionic.local:6180/ FF displays "We can't find this site ... Unable to connect to server at bionic.local ... check your network connection and firewall"

BUT ping bionic.local works perfectly and resolve the good IP address from the Chromium navigator the same URL works without a problem, I can open the distant web site.

This workaround works : add a static resolution in the /etc/hosts file : 192.168.0.71 bionic bionic.local => so FF works in the expected way for now ! But as I said this a workaround and a bad solution.

I supposed too the port was blocked because I accessed an unusual port. So I tried this without success.

How the hell make that FF v97 allows me to use an unusual port ? Or is it bound to the domain "local" which is no more accepted by FF ?

Thank you in advance for your help. With adelphity, lnj

How to do

Hello,

I am using the Flatpak Version of Firefox on Manjaro Linux. I have hardware accelerated video playback on Youtube for VP9 but not for H.264 on YouTube and Twitch. I can verify that with intel_gpu_top. My hardware should be capable to do hardware decode. You can see in the provided screenshots, that it should work from the configuration standpoint. Do I missing something here or is this maybe a bug? I can provide any further information if needed.

I am using the apt version of firefox v125.0.2 (64-bit). I do not have a dedicated GPU - I use my intel core's internal gpu only Intel Corporation HD Graphics 620 (rev 02).

I used to play this game named narrow.one, which before I reinstalled the mentioned libraries, was working fine except for crashing a few times. I thought these libraries were causing some issue, so I tried reinstalling them.

I reinstalled the libraries using: `sudo apt install --reinstall --fix-missing libgl1* libegl*`

After installation, I start getting that error. So, I tried reinstalling firefox (using the same command), and then restarting the laptop - but of no use. Chrome seems to be running WebGL, including the game.

In firefox, on the https://get.webgl.org/ page, I see Hmm. While your browser seems to support WebGL, it is disabled or unavailable. If possible, please ensure that you are running the latest drivers for your video card.

After that, I also tried reinstalling `libopengl0` and `libglu1-mesa` and `intel-microcode`, but of no use. Running although, `sudo intel_gpu_top` and then chrome, it seems that the GPU is in use by chrome as well.

I then go to about:support. It shows me the images I have attached. Reading the logs, there several `blocklisted` values in `Decision Log` section. I suspect that's the cause of this issue, but then I don't know how can I un-blocklist the blocklisted things, and even after that, why does Chrome runs webgl if these are blocklisted?

Running `glxinfo -B`, I get the following: `name of display: :0 display: :0 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer):

   Vendor: Intel (0x8086)
   Device: Mesa Intel(R) HD Graphics 620 (KBL GT2) (0x5916)
   Version: 23.2.1
   Accelerated: yes
   Video memory: 7697MB
   Unified memory: yes
   Preferred profile: core (0x1)
   Max core profile version: 4.6
   Max compat profile version: 4.6
   Max GLES1 profile version: 1.1
   Max GLES[23] profile version: 3.2

OpenGL vendor string: Intel OpenGL renderer string: Mesa Intel(R) HD Graphics 620 (KBL GT2) OpenGL core profile version string: 4.6 (Core Profile) Mesa 23.2.1-1ubuntu3.1 OpenGL core profile shading language version string: 4.60 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 23.2.1-1ubuntu3.1 OpenGL shading language version string: 4.60 OpenGL context flags: (none) OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 23.2.1-1ubuntu3.1 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20`

I do not know much about OpenGL, but reading the above stuff, I suppose my GPU is in use and also has a compatible driver (although I am not sure).

Also, running `glxdemo`, `glxheads`, and `glxgears` seems to be rendering stuff.

Should I reinstall firefox after purging it first? Please help.

Thanks!

I've disabled this for my google account. So when I search from google.com this behavior doesn't happen. But when I type anything into my address bar on Firefox to search, the first suggestions are from my search history.

I don't want to delete my search history.

I often use my search history to find specific things that I need, but didn't bookmark at the time. I need my search history to be saved. I just don't want to automatically receive suggestions based on it.

Is there any way to turn this off? Even with an extension or something?

Hi, I'm using Linux Mint 22, Firefox 129.0 (64-bit). Browser is hanging after approximately 4 hours. Not sure if this is a Firefox issue, but this is where I'm starting the troubleshooting process. My suspects are (1) the browser, (2) NVIDIA drivers (3) the new Linux Mint kernel or possibly (4) a mix of the above. This was a fresh install with default options on (Wilma). Using the latest graphics drivers for GeForceRTX 2060, driver version 555.58.02, went down to native drivers, no change. Honestly, this one has me baffled. Been troubleshooting this for 3 days. It feels like a memory leak. Nothing on the crash reports. First, browser will hang, then mouse and keyboard. Hard reboot is the only option. Any help would be appreciated.

I am going through the https://support.mozilla.org/en-US/kb/containers#w_manage-your-containers page and I dont have the option to add new containers when I click on the icon. I am only shown the choice to open the current page into one of the default containers. If I open a new empty tab, this icon doesnt show up in the url bar.

I have gone through the manage extensions options as well and I cant find a similar option. Can anybody point out what I am missing?

Operating System : Ubuntu Lunar Lobster (23.04) x64 Firefox version : 116.0.3 (64-bit) installed via snap

I try to set up Firefox Sync on Firefox on a VM on Fedora. I enter my e-mail and password. Then I get the message (after retrying): "Email resent. Add accounts@firefox.com to your contacts to ensure a smooth delivery." However, I do not get the email with the confirmation code.

My email address has this format j@xxxxx.org

The increase happened here: /storage/permanent/chrome/idb/3870112724rsegmnoittet-es.files/

79 files taking 590MB created in 3 minutes, out of nowhere. Why were all these large files created?

Using Linux Mint, Firefox 125.0.2

Dear Sirs,

today i did lockout everybody on a test server of a web application while playing with CSP on the server side. no modern browser was able to open the page anymore. but the real problem was that the configuration interface was also not accessable anymore.

the option security.csp.enable is long gone since FF 99 and i had to ""downgrade to FF 98"" to be able to access the misconfigured server.

please enable that security.csp.enable in about:config back again at least for the development version of FF. someone might need it. other options are to install risky extensions and i would like to avoid that in the future.

Yours

E

This issue has arisen on Firefox for Linux Mint (my current version is 123.0 (64bit)). I like Firefox, and I like its bookmarks toolbar, and have used it for many years, but there seems to be a new bug introduced today:- The bookmarks toolbar is present and correct when I start Firefox, but now it disappears as soon as I select any bookmark, or if I enter any web address or if I open a new tab. The [View >Toolbars > Bookmarks Toolbar > Alway Show] option is already selected, but the toolbar is no longer visible. If I click on it again, the bookmarks toolbar reappears (or I can restart Firefox, and this will also restore the toolbar). But the toolbar now disappears as soon as I use the browser in any way, and so is currently not really of practical use, as it needs constant restoring. Hope you can help resolve this. Many thanks in advance

Hi folks.

I use Firefox a lot. I have about 36 windows of firefox open and some of those can have a LOT of tabs on/in them.

I have recently "evolved" to using a computer monitor. Before then it was an old flat screen TV - 1336 x 768 resolution (there about).

Now I have a 1080p monitor and things are different.

I use Node-Red (dashboards) and they took a beating with the new size.

I've set THOSE tabs to 133% magnification - and yes that isn't the correct size to emulate the TV. But I only thought of doing this a fair way down the track of trying to rearrange the layouts. (MY MISTAKE)

But I realised that at least not too long down that rabbit hole.

So that WINDOW is set to 133% zoom. But just now I tried to zoom out of another tab on that window and realised that the zoom on the other tabs is changed too.  :(

Am I missing any tricks? I know I could move THOSE tabs to a whole new window and that's that. But in the bigger picture I just want to check.