Thunderbird Support Forum

I saved a draft of a long email.

I now wish to open the draft to proof read it and send it.

With the latest version of Thunderbird I cannot find any way to access and open the save draft.

Any assistance gratefully received.

Thanks in advance

Peter

When I'm searching Community Discussions, it would help a lot to be able to sort the discussions by date or at least see when a discussion was started without having to open each discussion individually. Is there a way to do this? The answers in older discussions, pertaining to older versions of Thunderbird/Firefox, may no longer apply and it is frustrating to try and find pertinent discussions when you have to open and close each discussion looking for answers.

Sehr geehrte Damen und Herren, ich mußte leider Thunderbird neu installieren und seit dem erscheinen Nachrichten nur noch in seperaten Fenstern. Normalerweise war die Darstellung 2geteilt: Oben die Nachrichten und unten die Inhalte. Wie stell ich das wieder her?

Mit freundlichen Grüßen Peter Treek

I am running Thunderbird 115.9.0 on Lubuntu 23.10. I have 4 IMAP accounts I use. The folder and file is not shared and I am the only account with access to the directory.

I use emoji as tags for messages, and have a large number of filter rules defined, nearly all of them Tag a message and set the Junk Status to `Not Junk`. These rules are all set to execute `Manually` or on `Getting New Mail`.

If I select a given inbox folder for a mailbox and select `Tools` > `Run Filters on Folder`, all of the messages are properly tagged, however, after some time (10m?, On new mail receipt?) at least one of my mailboxes will lose all of the tags that were previously set for messages. Manually running the filters will restore the tags, until they disappear again some time later.

I've not seen anything in the Browser Console log (but perhaps I'm not using the right term?) Is there any way I can diagnose or fix this issue? Thanks!

Goodmorning All in MOZILLA Support.

i was writing the same help message few days back but not received a reply and for this i write again.

I'm using on my Apple MacBookPro Thunderbird Thunderbird 78.14.0 (64 bit) and i'm having problem for the setting of my new company email that, as said in the subject of this email, is in office365 outlook.

Cause i need to store all the communications interesting my activity even after my consulting will expire and this for obvious question of confidentiality, i ask You All gently an help in manner to resolve the problem and finalize the setting on my laptop.

Thank You All so much in advance to have care of my humble request.

Vincenzo

Lately I'm having trouble with my connection with outlook. I use a free outlook email address. Sometimes (not always) when starting Thunderbird, I get the "user authenticated but not connected" warning. After a while it's working again.

I have tried several settings but can't figure out what solves this issue.

I'm using port 993 / SSL/TLS and authentication method is set to normal password.

Most of the times this works.

When I switch to OAuth2, I get the Microsoft screen to login to my work / school account which I do not have.

I've search the web to find a solution for this but I can't find it. Hopefully someone can help me out because it drives me "nuts" ;)

TB 91.7.0 (64-bit I used to send/rcv gmail no problm, started having issues ~ Oct 2021 I then setup a 3rd party app password in gmail account for thunderbird. That allowed me to Send Gmails, but, not receive it kept asking for password. Then I read to use OAuth2 and saw that Google will no longer allow 3rd party app passwords, so i deleted it in google, and set both Imap.gmail.com and smpt.gmail.com to use OAuth2 (both set for SSL/TSL). I did this just for smpt first when the 3rd party app password was still enabled, i could recv but, when i went to send, it would ask for password, i enter it, then it would sent msg to my cell phone to Allow thunderbird, i would press Allow on my phone, and Thunderbird would come up with Sending message.. with the progress marked all way to end BUT, it will never complete sending.... I have to hit cancel it then shows Failed message unable to authenticate. After I deleted the 3rd party app password in gmail settings, now when i start thunderbird or try to receive emails, it goes through the same authorization process with my phone, but, then never downloads any new emails. I have spend HOURS on this.. extremely frustrated (I have been forced to us ms mail which i really don't like, i am too used to thunderbird (although I wished thunderbird had check boxes on emails to select via checkboxes for delete, or moving, etc)

This morning I clicked the button to download my latest e-mails. As they hit the In Box all the messages already there just disappeared! Gone! Not in In Box, not in Trash, not anywhere! Some of them were important business messages requiring a reply. This is a disaster!

Is there any way to recover these lost messages?

Is there any way to prevent this from happening again, short of abandoning Thunderbird and finding a new e-mail program?

I have been using Thunderbird for a couple weeks now, and today is the first time this happened.

For weeks, I have been searching everywhere for a definitive method for transferring my Thunderbird 91.8.1 profile to a new PC. There are lots of posts mainly covering windows applications and older versions of Thunderbird. One reoccurring problem seems to be that some installations have 2 profiles. Some have a profile with just a xxxxxxxx.default profile and others have a xxxxxxxx.default-release and a xxxxxxxx.default profile. It would appear that if you have the 2 profiles then the .default-release would be the one you would use for transferring to a new PC. I was wondering if some one could lead me to a current definitive procedure, for transferring a Linux based Thunderbird 91.8.1 profile, from one PC to new Linux PC . What to do if you have the 2 profiles? Can you just delete the yyyyyyyy.default profile?

Perhaps some one could comment on the following procedure that I have cobbled together from the myriad of posts that I have read.

THIS IS MY VERSION (UNPROVEN) Transfer Thunderbird (91.8.1) profile to new PC [v_4]

On your SOURCE computer [Linux Mint Cinnamon 20.3]

       1. Connect a device for data transfer, either a USB flash drive, or a USB SSD/HDD drive. 

       2. Open the Home directory and click the “View tab” then check the box “Show Hidden Files”.

       3. You should find a directory called .thunderbird. 

       4. Open .thunderbird and look for the folder, xxxxxxxx.default-release. Note; the x represents a string of 8 random alpha/numerical text. 

       5. Right-click on the xxxxxxxx.default-release folder and select Copy.

       6.  Paste a copy of xxxxxxxx.default-release to your transfer device. Remove it safely from the source computer when done. 

       7. Uncheck the “Show Hidden Files” tab that you checked in step 2.

Note: a) These steps can also be used to create a backup of your Thunderbird profile folder.

         b) In step 4, you may not find a default-release folder. You may see a xxxxxxxx.default or  
             both. Choose the one that is active.

On your DESTINATION computer [Linux Mint Cinnamon 20.3]

       1. Open thunderbird and then close it. A new profile will be created yyyyyyyy.default-release, or .yyyyyyyy.default.

       2. Locate and open the backed-up profile folder, xxxxxxxx.default-release.

       3. Select all of the folder contents and choose Copy. 

       4. Locate and open the new profile folder,  yyyyyyyy.default-release.

       5. Paste the contents of the backed up profile folder into the new profile folder. Choose to overwrite existing files of the same name. 

       6. Start Thunderbird.

Some time ago, Thunderbird changed the whole organization of the email presentation. I am a long-time Thunderbird user who is used to the old screen and organization and I want to find out how I can get the old screen and organization back. I've attached a screenshot so you can see which version of Thunderbird is causing me so much trouble. Why change the traditional top-of-the-screen menu: (File, View,Tools, Help)? It was so logical and so easy. The movable mish-mash that exists now is driving me crazy.

For instance, I used an app under Tools that presorted certain emails and routed them to assigned folders. Not only has the sorting gone wrong, I haven't got the faintest idea where the app is? The emails that were once successfully sorted and rerouted are not working. And they're turning up as read in random folders.

Firefox also changes things that don't need to be changed, but my experience there is that an add-on or extenstion soon turns up that restores the features that users like.

In my preliminary search on my problem, there was not one article. In fact, my search came back with the message that no article appeared to match my query. I guess I must be the only person that is not happy with this interface.

Is there a way I can get the old version back? I'm sorry if I seem grouchy, but I am 83 and not being able to find what I need and what I used to have makes me a tad tetchy.

In a world where respondent's often draft messages about a new subject by lazily replying to messages on an old subject, does anyone find Threading helpful? Why is it now the default.

After View/Sort by/Unthreaded then propagating that by "apply current view to all folders." All folders do in fact sort by unthreaded. But if I create a new subfolder it defaults to sort by threaded. Please, is there anyway to entirely disable Threading?

Getting a popup now every time Thunderbird tries to sign into gmail. It says "Sign in with your Google Account" but nothing works when I put in my id or email. There's no response. T-bird is set up properly and uses oauth2; this just began happening. Less secure apps is on but that's being stopped, so looks like I won't be able to use gmail anymore.

I tried deleting my gmail a/c and now I can't create one. I can't get past that "credentials needed" popup.

How can I get T-bird to work with gmail?

I have one computer with error "user authenticated but not connected". I have already reinstalled software, re-created user account. Changed password.

On account recreation OAuth2 do not display regular app rights display at end of Oauth2 login cycle. Microsoft Mail works on same computer and same account works on other machine.

How to completely reset Thunderbird settings?

I am using Thunderbird 102.5.0 Windows 10. Port 143 Yesterday it stopped sending emails. Receives fine and sends from other platformsFrom Spectrum I get Sending of the message failed. An error occurred while sending mail. The mail server responded: <xxxxxx@charter.net> sender rejected. The email address you are sending as must match the email address you used to auth. Please check your SMTP settings. AUP#Out-1500. Please verify that your email address is correct in your account settings and try again

AS always Spectrum was not helpful.. Seems like there should be an easy fix???

Google has announced that after May 30, 2022 third-party apps that log into google with account name and password (which I assume includes Thunderbird) will no longer be able to do so, as they will enable 2-step verification. I currently and for years have used Thunderbird to pick up my mail from 5 accounts, 3 of which are gmail accounts. Will I be able to continue using Thunderbird after May 30, 2022? I have been unsuccessful getting any helpful information from google itself. They don't have a list of "trusted" third party apps that will continue to work with them. Anything people know about this will be helpful to me and appreciated. Thanks.