Thunderbird Support Forum

Need to set up Thunderbird to receive emails from yahoo. Cox is transitioning emails to yahoo presently have two addresses : cliven@cox.net and daciaandclive@cox.net

Hi!

I presumed that the settings for copies to self when sending works for both replies and forwards, but I just discovered that it only works for replies. That is NOT satisfactory, and not logical - if you ask me.

I think it worked until about 2 years ago, when Thunderbird was seriously damaged by "updates", and has not yet recovered fully...

I have attached an anonymized screenshot of the "Place a copy in" settings. The sending email address is behind 3 of the erased areas. Only "Bcc these" is different.

Any solution would be appreciated. Thank you.

I can't receive emails at any address from those in Thunderbird. I have several addresses, some in Gmail but not all. And in each of them I get this message: The STAT command did not succeed. Error getting message number and sizes. Mail server pop.gmail.com responded: [AUTH] Invalid credentials. I am using version 115.5.2

After upgrading to SuperNova on my MacBook Pro, the Mail Merge function no longer is available under "File". I looked under Tools to see if I needed to reinstall the Mail Merge Add On, and the Add On feature is also missing.

I found a discussion where someone said to download some debugging file, and to do that, you had to look under the options (three vertical dots) next to the Unified Folders Inbox. However, my Unified Folder Inbox does not have three vertical dots.

Holding emails that need to go out to multiple recipients. )-:

Thank you.

RD

Thunderbird will no longer save sent emails to my SENT folder. I get an error message when I send an e-mail saying, "Your message was sent but a copy was not placed in our sent folder(Sent) due to network or file access errors. You can retry or save the message locally to Local Folders/Sent-using my email address. Cox Communications is my ISP and they say the problem is not theirs.

when I try to send an email you ask for a pass word for jojack@dslextreme which I havent had for years

2

2

Just set up Thunderbird - inbox for email account mainly looks fine, except for entries at top of list with only time shown in last column - these are a variety of dates. After that section, my list of inbox messages proper starts. Can I get these initial entries not to display? (or if they have to, why?)

The last couple of days emails from one particular adress (mail send from or generated in our membershipsystem) have started to disapear from my inbox.

I'm not aware that any updates have been done since when it worked.

The mail shows in the inbox for maybe 5-10 sec and then puff without me doing anything or if I click away from inbox and back it's gone

I have checked my spam, the trash and my filters and I have done a search. Even ended up deleting my filters, to be sure.

I have made sure the email adress is not on any spam list. I even tried to make a filter where it would copy the mail to another folder to see if it would stay there (it didn't get copied).

The mail is also gone when I check directly on the webmail with my mail provider.

On my thunderbird I have three different email accounts from the same email provider. I tried sending the same mail to two of my accounts at the same time form this particular emailadress (I can acces the membershipsystem and send / generate mails from there). The mail was recieved and stayed on one account but not the other.

I'm running out of things to try - please help me.

I have two computers, one older with TB 115.9.0 32 bit, pop. The other has 115.9.0 64 bit, imap, same email address. I have tried to merge them, but when i do the Thunderbird Import folder has zero messages and no subfolders. I also tried changing the old TB to IMAP, didnt work: "configuration problem". Any help would be appreciated.

Hyperlinks in Thunderbird (115.9.0 64 bit) running on Ubuntu 22.04.4-LTS have quit working overnight. Too my knowledge nothing changed. I have followed all the steps in the document "Hyperlinks in messages not working" with no luck. 1) My default browser was Chrome. Changed to FireFox. No Luck. Changed back no luck. 2) Check that no application is specified for HTTP content can not be followed No Preferences option exists under the menu in my version of Thunderbird. Checked in settings found nothing matching the description. 3) Checked for incorrect preferences. Used config editor. Their is no Reset option for the settings. Found the referenced setting. Switched from True to False and then back again, hoping the might reset it. No Luck 4) Switched to Safe mode from the Help menu. No luck.

New to Linux, just set this system up 2 months ago. Migrated my Windows Thunderbird database without issue and it was working fine until this morning.

In need of suggestions. If uninstalling is going to be required, I need to be able to do it a way that does not lose my historical email records or my cardbook address book of 1000 names.

Thanks

I received the latest update to v. 115.4.1 and after admiring the new look, I discovered that I could not open any type of hyperlink within an email. Right-clicking and selecting 'open in browser' fails to open the link as well. This was never an issue until this update. I am on a Win 11 desktop with Chrome set as my default browser. Please advise - I love this tool!

I've had long conversations with Apple regarding the setup of iCloud email accounts on Thunderbird. The process must include the generation of an App Specific Password using Apples web page :

https://appleid.apple.com/account/manage

This generates a password in the form aaaa-bbbb-cccc-dddd which is a different password to be used only with one Windows APP. Apple insists this is working with their standard mail server settings preset by all the email client providers. I've been advised to refer to Mozilla Thunderbird and Apple are insistent they can do no more than mail me links to all the instructions I've already read in detail several times. However, I believe the problem lies with Apple but they don't yet know it. I've used separate ASP generated passwords and tried to install an iCloud email on several different email clients: Thunderbird, Mailbird, Outlook and Postbox. All these confirm that the settings seem to be valid but nonetheless the email account fails to load with error messages suggesting the configuration or password (i.e. the ASP) is wrong. The common factor is Apple not Thunderbird. I suggest anyone flummoxed by this awaits the acceptance of this problem by Apple.

How do I migrate the old Thunderbird profile to the new Thunderbird? Background: Up until mid-Jan 2024 I was using Thunderbird on Windows 7. In mid-Jan I did a "clean" install of Windows and installed Thunderbird. Due to a corrupted Windows installation, I had to do another "clean" install of Windows 10 Pro. Today I installed Thunderbird version 115.9.0. Everything went well. However, I don't have access to my old - pre-mid Jan profile - which has e-mails and contacts I need to access. Here's my setup: Thunderbird installed in D:\Thunderbird New Thunderbird profile is in M:\Thunderbird Old Thunderbird profile is in M:\Thunderbird-OLD

How do I migrate/import the old messages, address book/contacts, and find out which extension I had installed?

Thanks.

I am getting a non-overridable TLS error when Thunderbird opens or when I attempt to download new emails (the emails will sometimes download later after I force a download. I have tried to change my TLS version without success. Please help me solve this issue.

My email setup is to an IMAP server (POP will not work with Gmail.com accounts). See my attached image files for further information.

When opening an email with previous email responses on it a seperate tab automatically opens for each previous email on that email. Before the update a few months ago only one tab would open when opening a new message and I want that system to continue. I cannot see how to do that.

I also prefer the previous option of unread emails in bold (showing on Inbox) rather than now underlined. Can I change that too?

Thank you

I am trying to switch my active and working Thunderbird 116 for Mac from pop to imap. After entering name email and password in the "set up your existing email address" I recieve the green box message indicating "the following server settings were found". When clicking the blue "done" button at the bottom of the page i get the "unable to log in to the server" error message. The mail account continues to work properly with the pop settings. Are there any workarounds or solutions to this issue? Thanks!

With the moving of Cox emails to Yahoo would it be feasible for Thunderbird to put an instruction list(with screenshots) of how to get all our TB email accounts from Cox to TB? Do we have to delete all our TB email accounts and re-enter them into TB under the new Yahoo or can we just change the server settings on the existing Cox settings? If just changing server settings what are the settings for the new yahoo? All my accounts are IMAP so if instructions could be made, maybe one for IMAP and one for POP for those who use either. Thank you

I've been plagued with incoming messages that use a foreground/background color combination too dark to read without forwarding the message and then applying white to the swept text. The uploaded image shows the progression of reading the message, sweeping the text in the message (still uncomfortably dark with low contrast), forwarding the message (still unreadable), then select the text and apply white as the text color. I've googled this problem to no avail as most hits are for color contrast in the inbox format for color.

One solution is to switch themes from "dark" or "system theme - auto" to "light" then Thunderbird switches to black text on a white background and the incoming message is readable.

Is there a setting I'm missing to automatically solve this without having to swap theme's to read a message then swap back to preferred dark mode?

I have been working fine with Thunderbird, but today it won't start up. It asks my master password, but then it doesn't show the screen with my email accounts / emails.. In task manager I have two lines with Thunderbird, but no activity. I tried to re install (without uninstall as I don't want to lose my emails), but that didn't change anything. Not sure what I can do.

I have a hotmail.com address. Until recently, it worked well as webmail, plus also from TB on laptop, via IMAP and SMTP.

A few days ago, the sending function via SMTP stopped working (not IMAP); and webmail is still fine. I've tried a lot to solve it, but to no avail.

My guess is that MS is to blame, but don't know how to reach someone better-than-hotline there.

Details see annex; OS is Win10, TB is 115.9

Would someone be familiar with this kind of problem? According to my traditional european quality idea, best should be to get in touch with an MS technician with access to the syslog, to hear what the system's response to connection attempts is - but this seems to be precluded? I wonder what alternatives there might be?