Firefox Community Forum

I want to print a PDF with a document size of about 4x2cm. When I choose "Default" Margins, the document is printed in the correct size, but without any margins. When I choose "Minimum" Margins, the document is printed with acceptable margins (12mm left, 4mm top), but the document is only printed in about 50% (or even less) size. Scale is set to 100 each (assuming those are percent) This is also visible in the print preview.

For the second printer, same issue (at least on print preview, didn't actually print) No issue (in print preview) when selecting "Microsoft Print to PDF" When choosing "OneNote (Desktop)" printer, the image is even smaller.

Tested around with custom margins a bit and it handles even worse. With my primary printer with 0.5 inches (defaults?) set, the size is ok but no margins are applied. Headers and footers are not shown (so the checkbox is checked - for some unknown reason) - Changing top margin to 0.49 or 0.51, the document is not shown, but the headers and footers are. Setting all margins to 0.00, both document and headers and footers are shown, but all overlapping / within the 4x2 document (paper size is set to Letter). Increasing the top margin (all others on 0.00) now makes the document shrink even more (Print preview, I didn't actually print)

I keep getting "Hmm. We’re having trouble finding that site." It's the only browser that gives this error.

With addons or no addons.

No proxy,

Clean new install, reinstall.

System reboot.

Firefox restart.

Nothing fixes the issue. It's the only software on my new system that gives any error reaching any site. Randomly it fails. I had to use Chrome to finish this support ticket because in the process I received;

Hmm. We’re having trouble finding that site.

We can’t connect to the server at support.mozilla.org.

If you entered the right address, you can:

   Try again later
   Check your network connection
   Check that Firefox has permission to access the web (you might be connected but behind a firewall)

How do I disable/make the context/right click menu appear as the normal mouse context/right click menu?

Normal context/right click menu: https://assets-prod.sumo.prod.webservices.mozgcp.net/media/uploads/images/2024-10-17-00-21-14-0f0d7a.png

Touch context/right click menu: https://assets-prod.sumo.prod.webservices.mozgcp.net/media/uploads/images/2024-10-17-00-22-53-f21a61.png

As you can see the touch menu is huge and since I'm a quite nimble touch-user, I don't need it.

I haven't been able to find any solutions when searching. I'm used to editing both about:config and userchrome.css.

In full screen mode, the bottom of the window is hidden under the task bar at the bottom of the screen. The scroll bar bottom and pages that use the full screen (e.g., they have buttons at the very bottom of the screen) get hidden and therefore aren't accessible to use. This is incredibly inconvenient and frustrating. I don't remember this happening before. Is this part of a faulty Firefox upgrade. How can I fix this?

Firefox crashes when trying to log in or add an account on Google services. It will also sometimes lag or not load when searching or trying to access Google Maps etc.

The first part happens whenever a website has a login with Google option, or if I attempt to go to accounts.google.com and do it there. As soon as I start typing in the input box it hangs after a letter or 2. I can reproduce this hang consistently. When it crashes, there is a URL in the bottom left indicating the browser is trying to access something.

I've cleared my cache and cookies and the problem remains. In addition, the Firefox crash reporter is empty and hasn't registered any crashes, even though it has clearly hanged and is visible in Windows Event Viewer (attached). This only happens on Google pages, so any help would be appreciated as obviously I switched from Chrome for better performance but I still need to access their services.

I can't attach 200kb+ file (pdf or word) in Outlook on desktop Firefox but can "forward" the same file attachment. File attachment works fine on Edge. I just had to download Microsoft Authenticator for Outlook emails on my cellphone and did not notice problem before that.

Error says "could not load try again later".

Locking this thread, please continue here: [/questions/1469718]
Hi there,

I’m encountering a strange issue when using Firefox to access videos on a particular website, [[Mobile dent repair |https://www.patriotpdraz.com/]]. The site itself loads perfectly, but whenever I try to play any embedded videos or media on the page, the video either doesn’t load or remains stuck buffering.

Interestingly, I’ve tested the same website and videos on other browsers like Chrome and Edge, and they work flawlessly. I’ve already tried clearing the cache, disabling hardware acceleration, and running Firefox in Safe Mode, but the problem persists only on Firefox.

Could this be a compatibility issue between Firefox and the way the media is embedded on this specific site? I would appreciate any suggestions to resolve this problem.

Thanks for your help!

Hi there,

I’m encountering a strange issue when using Firefox to access videos on a particular website Patriot PDR. The site itself loads perfectly, but whenever I try to play any embedded videos or media on the page, the video either doesn’t load or remains stuck buffering.

Interestingly, I’ve tested the same website and videos on other browsers like Chrome and Edge, and they work flawlessly. I’ve already tried clearing the cache, disabling hardware acceleration, and running Firefox in Safe Mode, but the problem persists only on Firefox.

Could this be a compatibility issue between Firefox and the way the media is embedded on this specific site? I would appreciate any suggestions to resolve this problem.

Thanks for your help!

Firefox's "restore previous session" feature on windows 11 automatically populates the windows back into the virtual desktops they were in on startup. This behavior seems to be absent or broken on firefox in KDE Plasma DE.

I'm experiencing a problem with browsing the My Network page on LinkedIn - it is cramped to the left of the window. Nothing seems to help (zooming in, clearing cash, etc.). This doesn't occure anywhere else.

Hi, since a few days Firefox basically became unusable on macOS.

Right now I can do the following: 1. Force quit Firefox 2. Open it again 3. Click Start New Session, do not restore anything 4. Go to this page for example: https://support.mozilla.org/en-US/kb/disable-or-re-enable-pocket-for-firefox 5. Baam, in a second or two Firefox is frozen. Only Force Quit works.

I tried removing the full profile, removing all folders in ~/Library which had Mozilla or Firefox in the name and making a new account. Still no change.

In the new profile I didn't enable any extensions. There are no crash reports in about:crash, I'm lost what should I do next?

Update: I downloaded Firefox ESR, currently version 128. It does the same! New profile, I go to https://support.mozilla.org/en-US/kb/disable-or-re-enable-pocket-for-firefox and it freezes.

I cannot even go to about:support!

I run Debian stable (version 12.7) and the Blackbox window manager. After the latest update to Firefox 128.3.1esr (with apt dist-upgrade) the cursor is black in Firefox windows but white elsewhere. My ~/.Xresources contains the line

Xcursor.theme: DMZ-White

which Firefox obviously doesn't use now. I have tried to set the theme with

gsettings set org.gnome.desktop.interface cursor-theme 'DMZ-White'

but that didn't change anything. Any clues?

Hello,

I'm having an issue where frequently images are appearing distorted, greyed out, or unusually rendered. This is only an issue in Firefox, and continues when the browser is put into troubleshooting mode and after data has been cleared. Even the favicons are having this issue.

When using jensonusa.com, a bicycle parts business, I am unable to click on an item and get the item to expand into a full detailed view. I can go to REI.com, click on an item and it will open up. I went to Safari and it works on that browser, but not Firefox.

Thanks

Every time I restart my laptop, Firefox loses all preferences and configurations whenever I reboot my laptop.

When I open Firefox after restarting my laptop, it acts as it's not connected to the internet, and won't load any pages, it just keeps loading indefinitely.

It's still connected to my Mozilla Account, but Sync is turned off, and all configurations and customization seem to be reset to default.

To fix the "connection" issue, I go to Menu > Help > More troubleshooting information and select the Refresh Firefox... button.

After that, I can go and activate the Sync option again, which will get all my bookmarks, extensions, etc.

Finally, I go to about:config and change the value of browser.uiCustomization.state to set my toolbar customization as I normally use.

I've tried reinstalling Firefox, removing all Mozilla-related files and folders, removed registry entries, but nothing worked...

I really enjoy Firefox, but this is too much of a headache... This is my last attempt to solve this issue, or I'll be forced to switch to another browser... At this point, even Internet Explorer will do

Firefox v131.0.3 running on a x64 Windows 11

{

 "choices": [
   {
     "text": "Sure! Here's a search engine optimized article about...",
     "log_probs": null
   }
 ],
 "model": "palmyra-x-003-instruct"

}curl --location --request POST https://api.writer.com/v1/completions \

--header "Authorization: Bearer <token>" \
--header "Content-Type: application/json" \

--data-raw '{"model":"palmyra-x-003-instruct","prompt":"Write me an SEO article about...","max_tokens":150,"temperature":0.7,"top_p":0.9,"stop":["."],"best_of":1,"random_seed":42,"stream":false}'https://api.writer.com/v1/completionsimport Writer from 'writer-sdk';

const client = new Writer({

 apiKey: process.env['WRITER_API_KEY'], // This is the default and can be omitted

});

async function main() {

 const completion = await client.completions.create({
   model: 'palmyra-x-003-instruct',
   prompt: 'Write me an SEO article about...',
 });

 console.log(completion.choices);

}

main();import os from writerai import Writer

client = Writer(

   # This is the default and can be omitted
   api_key=os.environ.get("WRITER_API_KEY"),

) completion = client.completions.create(

   model="palmyra-x-003-instruct",
   prompt="Write me an SEO article about...",

) print(completion.choices)