Firefox Support Forum

The issue concerns the Flatpak version of Firefox on Linux. This issue only happens when I'm connected to my VPN router. For info, I'm using Fedora 35 Silverblue. This issue happens on Fedora 35 or Fedora 35 Silverblue. I been using Fedora since version 33 and such problem existed back then.

When connected to my VPN provider via my router, trying to start a Firefox Flatpak instance takes minutes upon minutes to load. I'm guessing it has to do with DNS query's Firefox does on start but I'm not sure. All I know is that when I connect directly to the internet without being hehind my VPN, Firefox loads in a split second. When I'm using the RPM version of Firefox supplied by Fedora, I do not have such issues even when connected to my VPN. This issue only affects Firefox Flatpak when behind a VPN. I tried opening the AppImage version of Firefox while connected to my VPN, and once again, it loaded within a few seconds. I been having this issue for many years and only figured out recently that my VPN connection was causing a problem.

I would like to point out that the Flatpak verion of Microsoft Edge and Chromium do start without any issues even while I'm connected to my VPN provider...

I was following this article https://support.mozilla.org/en-US/kb/run-firefox-chromeos

Installed flatpak and repositories but when I try to use flatpak to install firefox I get "No remote refs found similar to ‘firefox’".

I have tried following a few other ways to get it installed, such as using sudo and using sudo su but that has not worked at all.

I followed to flatpak quick setup on Chromebook guide that is linked in the above help article and created the nested containers in crosh as well.

below is what happens if I go to flathub and copy-paste their recommended command to install firefox.

Remote ‘flathub’ found in multiple installations:

  1) system
  2) user

Which do you want to use (0 to abort)? [0-2]: 2 error: Nothing matches org.mozilla.firefox in remote flathub

I have same problem. I tried same things. Previous and next media keys aren't working on youtube or music player. But play/stop buttons work fine. All media keys are working in chromium, for example. Media keys enabled in config: media.hardwaremediakeys.enabled = true

UPD: hardware problem, solved

Local Machine: Dell Inspiron i5-7200 / 16 GB RAM / Local Op Sys: Ubuntu 20.04LTS

Firefox version: 99.0 FFDE version: 100.0b5

Node.js version 14.18.1 npm version 6.14.15

I had a Node.js web app running on my local machine all usual browsers like Firefox, Firefox Dev Ed (FFDE), Chromium, Edge, Opera, etc till recently.

Recently it shows an error when run on Firefox (also on Chromium, Opera and Edge) although continuing to run okay on FFDE.

Firefox Error: Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at file:///home/sandbar/Desktop/nodeapp-local/undefined. (Reason: CORS request not http).

Edge Error: Access to XMLHttpRequest at 'file:///home/sandbar/Desktop/nodeapp-local/undefined' from origin 'null' has been blocked by CORS policy: Cross origin requests are only supported for protocol schemes: http, data, chrome-extension, edge, https, chrome-untrusted.

Naturally, I need to test the web app on my local machine using several browsers before I should upload it to a server and trial it there.

So how do I configure the browser and/or app to allow access to local machine files ?

Hello everyone :)

From a folder, I have loads of Firefox profiles from different eras. I am looking for a way to export all the bookmarks of each of the profiles to an HTML file like the manual method (Library > Import and backup > Export bookmarks to formal HTML), but all in an automatic way by script. I like the HTML export from Firefox because it allows you to quickly navigate using keywords, either in links or in the folder names I gave.

Is there a simple solution that would reuse, for example, the same export code as Firefox ?

Thanks in advance With adelphity estebann

I downloaded the latest Firefox to my Linux and got this error message: W: Download is performed unsandboxed as root as file ......etc. There's more, but can you tell me what happened and if I need to worry? I haven't had any trouble using Firefox since the update. I've attached a screen shot of the whole message.

I appreciate any help.

I am running WikiSpecies on Ubuntu Firefox 64-bit v. 98.0.2.

I used to be able to display a collection of unused files with the used ones but showing a red color indicating that the file was unused (because noone had entered anything other than the file name).

Now, however, ALL files in a directory (e. g., see https://species.wikimedia.org/wiki/Craspedophorus) are shown with the same color, whether they include additional implementation details or not.

Would it be possible for you to restore the "unused" color of empty files? It is bothersome for me to open EVERY file, empty or not, in a directory just to find that most or all of them never have been implemented. Adding a special color -- or other distinctive display -- to unimplemented files would save me a great deal of time.

I am attaching a picture of a typical unimplemented file.

I'm running Firefox 99.0.1 on Ubuntu 22.04. Recently (I think since I updated to Ubuntu 22.04 about a week ago), Firefox has been refusing to show me file upload dialogs. When I click a button that's supposed to give me one, nothing happens.

This has been happening with: - The "attach files" button in Gmail - A file upload button on Gradescope (website for managing homework assignments) - File -> Open File... and Ctrl+O.

Dragging and dropping a file onto an email in Gmail does attach the file -- it's just that the button doesn't work.

I've tried restarting, and I've tried running Firefox in Troubleshoot Mode -- so far nothing has fixed the problem. What else should I do?

Hello

I do not understand how firefox sync is supposed to work. I have a desktop and a laptop. The desktop is FF 85 on Linux Mint (I cannot get a later version due to some querk) The laptop is 99 on Windows 10 Both are signed in to sync but my bookmarks were scrambled so I signed out the laptop and cleared the profile, cleaned up the bookmarks in the desktop and to be safe I tried just syncing the tabs, not the bookmarks, by opening the fresh firefox on the laptop and signing in again. In the sidebar under my account icon I clicked "Synchronise now" and the open tabs from my desktop appeared in a list underneath, jumbled up. (I have 2 separate windows open on the desktop with different tabs in each, but this separation was not followed either, there didn’t seem to be any provision for syncing tabs in two separate windows)

But the row of tabs didn’t open, all I can do is open them one by one from the list on the right, this is a slow process as every time I click on a tab in the list the new page opens in the same single tab, not a new one, but the sidebar closes again.

Is this what’s supposed to happen? I was expecting the synced row of tabs to open automatically.

This feature would have been useful as my OS on the desktop, (Linux Mint) tends to crash and to have the on the laptop would be a good backup.

Incidentally the other way I try to back up the lost tabs is to select them all and bookmark them to a new folder which I call “backup” but it seems this doesn’t necessarily duplicate them, which I would prefer, so any of the open tabs that were previously bookmarked risk being removed from the original bookmarked folder, without my noticing, and I am therefore reluctant to delete the backup folder without checking that it doesn’t contain the only bookmark of a page.

When I came back to syncing the bookmarks, how do I avoid them getting scrambled again?

I forgot my password to my Firefox account, and only just realized I haven't updated it in KeypassXC when I was trying to log in to a new machine. It seems that, even though I am already logged in on my old computer and have full access to my account (including saved passwords, bookmarks, and browsing history) I can't find a way to reset my password without deleting all of my synced data. From the "Change Password" menu, it requires my old password if I want to change it without deleting everything. Also, I have 2FA enabled, so why isn't there the option to authenticate my identity in a password reset using 2FA instead of my old password? I know a similar thing already exists for recovery keys, but I only have 2FA. Is there any way for me to reset my password where I don't lose everything? Thank you.

Hi,

I've upgraded to Firefox 99 (on Linux) and a website that works fine in Firefox 88 and Chromium 101 has stopped working for me - I can't get the log in form to show up.

This is in a standard window (as opposed to private) with all add ons disabled, Enhanced Tracking Protection switched off for the site and protection settings set to 'Custom' with everything switched off (and same with protection settings set to 'Standard').

The website is:

https://www.riverford.co.uk/

and then click on person icon in the top right corner.

I'm having similar problems with other websites, eg

https://www.ebi.ac.uk/interpro/

in a private window (but weirdly works fine in a standard window) - click on 'Example protein sequence' to fill in a sample sequence and then press 'Search'. In a standard window this works but in a private window the 'Search' button doesn't work. (If the search button does work for you, please delete the job afterwards by clicking on the rubbish bin/trashcan icon so as not waste their resources.)

I got help with this from your group some weeks ago, but I had to reinstall my Ubuntu OS (linux v.20.04.4 -- using firefox) recently and can't recall the answer.

When I view a WikiSpecies list of file names (e. g., see https://species.wikimedia.org/wiki/Pentatominae), the instances which have been installed but never used should be in a different (reddish) color. I am attaching an image of a page containing a file named "Abadia" (first one on the left, just under "A") which is unused. I also am attaching an empty "Creating Abadia" which is the result of clicking on "Abadia".

Please tell me how to change the image of an unused, empty file. I recall that there were two different choices SOMEWHERE in the system, "Always" and "Never" I think: One of them forces a system-level color pattern which includes reddish unused items; the other allows the used to program arbitrary displays such as the above (typical example from the dconf editor is 'bg_color: #f0f1f2; selected_bg_color: #023C88', but this editor does not change the appearance of a file instance.

I am developing an extension. I am running the extension locally and I have noticed that it doesn't load on this page (https://support.mozilla.org). Is there some limitation to running extensions here? The same extension works fine in google chrome for this page. It is very important for me that the extension runs everywhere since it's an accessibility extension.

I am sending tabs from Firefox mobile to Firefox desktop (Arch Linux) (on a regular base for years). All worked fine. After a new install two weeks ago the Firefox desktop receives the tabs and opens them as supposed. But after a day or three when I open Firefox desktop it opens all previous tabs again together with the newly sent tabs. I deleted the Firefox profile and installed from Firefox sync but the problem occurs. I deleted all devices in sync and added my 2 devices (desktop and mobile) again but it didn't work. Does anybody have a similar problem (and a solution)?

In the location bar (aka url bar aka address bar), the base domain name ("example.com") is displayed as normal text, whereas everything else in the url is displayed in gray. For example, if the displayed url is https://foo.example.com/bar, the "https://foo." and "/bar" are in gray.

Is it possible to get the whole url displayed as normal text, i.e., black, and avoid this "graying out" of some of it?

In my searches so far, I've found various other customizations for the location bar via userChrome.css, but not this one. Any help appreciated.

I'm using firefox 91.8.0esr (64-bit) as currently packaged for centos7 (x86_64), though presumably this is not system-dependent.

I work on kubuntu 20.04 with plasma 5.18.8 desktop environment. I have a QtCurve-based custom application style, which I almost match with css for GTK apps. Firefox has to be an exception by itself! Not only that, but it changes my ability to customize its interface, from time to time and even changes access to such ability, on some updates.

My scrollbar customizations in userChrome.css and userContent.css do not work any more (other CSS changes still work, for menu/addressbar/tabbar/bookmarksbar orderint and tab styling). I had to resort to settings in user.js file, to get a 20px width scrollbar, suitable for my big screen, but... it gets very wide when I increase the focus, on some webpages and becomes very ugly! Furthermore, I cannot make sense of the proper use of "ui.themedScrollbar*" settings and the scrollbar and its slider result in the same color. These are my settings in user.js:

user_pref("widget.content.gtk-theme-override", "backwater"); user_pref("widget.non-native-theme.enabled", false); // Use GTK-3.0 gtk.css: set to false user_pref("toolkit.legacyUserProfileCustomizations.stylesheets", true); // Use userChrome.css & userContent.css: set to true user_pref("widget.gtk.alt-theme.scrollbar_active", true); user_pref("widget.non-native-theme.scrollbar.size.override", 20); // If nothing else works, fix scrollbar width to 20px user_pref("widget.non-native-theme.gtk.scrollbar.round-thumb", false); user_pref("widget.non-native-theme.gtk.scrollbar.thumb-size", 1.0); // originally 0.75 user_pref("widget.non-native-theme.gtk.scrollbar.allow-buttons", true); // it was true, anyway... user_pref("layout.css.cached-scrollbar-styles.enabled", false); user_pref("layout.css.color-mix.enabled", true); user_pref("widget.non-native-theme.scrollbar.style", 4); // wide scrollbar theme: set to 4 user_pref("ui.themedScrollbar", "#bad1f5"); user_pref("ui.themedScrollbarInactive", "#668cc4"); user_pref("ui.themedScrollbarThumb", "#e4e4e4"); user_pref("ui.themedScrollbarThumbHover", "#e4e4e4"); user_pref("ui.themedScrollbarThumbActive", "#668cc4"); user_pref("ui.themedScrollbarThumbInactive", "#bad1f5"); user_pref("browser.dom.window.dump.enabled", false); user_pref("extensions.ui.sitepermission.hidden", false); user_pref("fission.experiment.max-origins.qualified", true);

Either with the "ui.themedScrollbar*" settings or without them (and cleared from the prefs.js file), the scrollbar and its slider result in the same color, unless I (tryingly) click on some place on the scrollbar outside its slider; then I can see the slider, _only_ for the duration of the mouse-down event (which causes up or down page-hight scrolling).

The default, very thin scrollbar, as well as my modified wide scrollbar with invisible slider are both useless to me! I have even tried fx-autoconfig (https://github.com/MrOtherGuy/fx-autoconfig) to make the scrollbar CSS work, but no result. At this point, I am considering switching to another browser, despite the trust I have to mozilla, for my data and privacy.

I'm using Ubuntu 18.04. Developer tools kept popping up so I went into about:config & set everything to false. Now an equally annoying tab keeps opening up asking to enable them. I don't just get this hitting F12. Just like before I disabled, this keeps popping up for seemingly no reason. Guess I'm accidentally doing something with the mouse. I don't have a clue how to use developer tools. Wish I could just wipe it out completely.

I use firefox since I go to college. When I got some problems, I try to check firefox use what to pick folder? I use Manjaro Plasma. I find chrominum use kdialog. But firefox looks not though both use gtk3 as UI

Firefox choose folder got wrong when use a USB HDD