Firefox Community Forum

How can I set tabs to automatically preload when I open the browser? I'm just trying to switch from Chrome to Firefox and I can't find such a setting here, although it is a very convenient functionality. I mean that when I open the browser, I can click on any of the tabs and it will be (partially or completely) immediately ready to work without additional loading.

Hi. I am running a 3 monitor setup and I like to keep open quite a few tabs. And two windows of Firefox. So two Firefox instances with several tabs on each. But because it eats a lot of memory, I have to close and reopen Firefox from time to time. And to my annoyance, sometimes it "forgets" about one of the windows. So opens only one instead of both. Therefore I loose some quite important tabs. Any suggestions on how to fix this? Thank you.

I have the HTTP_PROXY, HTTPS_PROXY and FTP_PROXY (and their lowercase counterparts) exported and then the firefox binary is started from the shell script. The settings in firefox say it will 'Use system proxy settings'. Nevertheless I do not see the proxy being used as I can not access the web pages that need the proxy. The 'about:config' also does not show that firefox picked up any proxy related information from the shell environment.

I know the proxy address is correct because if I use brave browser instead of firefox (same shell script that launches brave) I can reach the web pages behind the proxy as expected.

I'm trying to use a manual proxy server for Firefox. When entering the proxy address and port number, Firefox outlines the port number field in red and disables the OK button thus refusing to accept my assigned port number. I'm trying to use port number 29842 which was given to me by the proxy provider.

Starting with Firefox version 120, you can set Firefox to automatically launch whenever you start or restart your Windows computer. https://support.mozilla.org/en-US/kb/open-firefox-automatically-when-you-start-computer

The browser shows opt-in prompt for the user to easily setup this behavior. However, I do not want to do this.

When I click "No thanks", the prompt goes away, but couple days later, it returns. I guess that an update resets the prompt status.

Is there a way to permanently disable this opt-in prompt without allowing Firefox to start automatically with the computer?

Every time I open Firefox after closing it, I get the message below. I can click the button to restore session and it works every time. With each update, I hope to never see this message again, but after installing a new version on Ubuntu today, I see the same familiar message. This is not linked to a computer, or an operating system because I've seen this on both Ubuntu and Mac. If Firefox could literally just click the button that would be awesome.

Sorry. We’re having trouble getting your pages back.

We are having trouble restoring your last browsing session. Select Restore Session to try again.

I have Yahoo as my home page and usually search from it starting out. I noticed, however, after the last update or two in the last week that when I hit search, it opens the search results in a new tab. It didn't use to do this, but I can't find any Firefox option to make the searches stay in the existing tab. Can anyone help with this? I don't think it's Yahoo's settings, because I'm not signed into it. It seems like the Firefox update created this new behavior.

Installed Firefox 122 in a new Windows 10 installation and added some extensions (e.g. Gesturefly, Update Scanner, uBlock Origin, Uppity). These pinned fine on my old installation. But I cannot find how to pin them on the new.

All the help I have found Googling, or using search here, says go to the Add-ons Manager page and right-click the extension and use "pin to toolbar". Alternatively click the extension and click the gear icon and use "pin to toolbar". But when I right-click there is no pin to toolbar context menu entry. If I left-click the gear I get "Check for Updates, View Recent Updates, Install Add-on From File, Debug Add-ons, Update Add-ons Automatically, Reset All Add-ons to Update Automatically, Manage Extension Shortcuts". If I right-click the gear I get a line of icons (left, right, reload, star) followed by "Open Image in New Tab, Copy Image Link, Email Image, Save Page As, Select All, View Pate Source, Inspect Accessibility Properties, Inspect (Q)". If I right-click the extension in the Add-ons Manager page itself, I get a very similar list. In no case is there a pin to toolbar option.

How do I pin an extension, given the above? What have I messed up?

I am using Firefox with the uBlock Origin and Cookie AutoDelete extensions enabled. When I try and load Gmail or any other Google site, I get a blank page and nothing loads at all. This only occurs when my VPN is on (I use Private Internet Access). However, even with the VPN on, Chrome will still load those sites. Disabling the VPN means that the sites load normally.

My guess is it might be some sort of privacy setting in Firefox, but I don't understand what it could be. The only thing that breaks/fixes the sites is connecting and disconnecting the VPN, irrespective of which country I try and connect from.

Hi, this is the same issue as as described here for Mozilla Thunderbird: 64bit Thunderbird issues with 64bit PKCS#11 drivers

– Firefox 122.0 (64-bit) – Windows 11 Pro 64bit (– Thunderbird 64bit)

Even though, I use a 64bit version of Firefox, it is not able to load any 64bit PKCS#11 module for security devices. Tried on several different PCs and several different 64bit PKCS#11 drivers for different smart cards.

When I try to load e.g. C:\Windows\SysWOW64\eop2v1czep11.dll for the Czech eID, it returns "Unable to add module". When I do the same from C:\Windows\System32\eop2v1czep11.dll, it works.

The issue is that some issuers of qualified and commercial certificates (like e.g. Komerční banka) do not issue a 32bit version of PKCS#11 drivers for their smart cards anymore and the only driver available is C:\Windows\SysWOW64\mopkcs11.dll, which cannot be loaded by Firefox or Thunderbird either.

I don't see a problem in implementing the support for 64bit PKCS drivers in a 64bit browser and a 64bit email client. And if it does have the support, then there is something wrong going on.

Nie mogę zalogować się na konto Gmail poprzez stronę www.google.pl w przeglądarce Firefox. Przy próbie zalogowania się przez www.google.pl pojawia się komunikat Bad Request Error 400. Ten sam problem występuje, gdy muszę potwierdzić logowanie do innych stron internetowych za pomocą konta Google. Po prostu nie da się nigdzie zalogować. Ten problem nie występuje w innych wyszukiwarkach. Moderator Firefox odpowiedział -"This does not sound like an issue with Firefox, but is something that the Google support team should be able to help you with" Na stronie www.google.com pojawia się ikona zalogowania, ale i tak nie wszystkie usługi związane z Google są dostępne. Niedostępne są wtedy — Google konto, Google Play, Gmail, Meet, Chat, Dysk, Kalendarz, Zdjęcia, - to tylko te najważniejsze niedziałające." Pliki cookie są włączone. 25.12.2023 ten problem nie istniał. Próbowałam przywrócić Firefox na wcześniejszą datę instalacji, ale to nic nie dało. Rozszerzenia i wtyczki odinstalowałam. Problem niestety pozostał. Bardzo proszę o pomoc. Pozdrawiam Bogaczewicz Bogusława.

Support,

The USPS website does not work properly with Firefox!! The Home page loads okay but there are multiple other issues with links not working. For instance all of the links under Quick Tools do not work except this one: https://www.usps.com/manage/po-boxes.htm. Other things don't work either.

Everything works fine that I tried with Google Chrome though! Please address soon.

Thanks

I don't think "Tabs" is the right topic, but maybe it's the best of the choices since "Other" isn't an option.

I have an email with a link to a monthly newsletter, which should take me to February's issue. When I click on, or copy/paste, the link, I end up with the January issue. When I copy/paste in Chrome and Safari, I get the February issue. The newsletter people suggested clearing my cache/cookies in Firefox, but that didn't help. No matter how I try to navigate to the newsletter in Firefox, I get to January. I have tried everything I can think of, and still get the January issue in Firefox, while that same link gets me the February issue in Safari and Chrome.

I'm using Firefox 122.0.1, on a MacBook Pro (Sonoma 14.2.1).

I'd appreciate any ideas you might have!

/edit: moved thread from Firefox for iOS (for iPhone/iPad) to Firefox section as you have macOS.

This morning I could not log into the Schwab customer website using current Firefox version 123.0 on Windows 11. Reverting to version 122.0b9 solved the problem. Before the reversion I tried clearing cache, history, passwords, etc, and I tried a full reinstall of version 123.0. What else would prevent a connection to Schwab when other websites worked fine?

Hi I'm running into an issue where I'm trying to save files while retaining their original filenames, but '%' characters are changed into an underscore when I try to save it. I've tested this with Google Chrome but it doesn't run into this issue. Is there a setting or workaround so that Firefox will leave the filenames alone?

My system broke during an update. Now I want to import my old Firefox userdata, but everytime I try to use the old data firefox just forces the creation of a new profile?

Is it completely impossible to recover data not created with the same firefox version?

I cannot find a way to add websites to the location permissions in Firefox Windows PC. I can easily get to the "Location Permissions settings " but there is no way to add, only remove. When I display the access icon in the URL address bar, it shows " you have granted the website additional permissions" , but the site does not display in the FF Settings-Location Box, and the target website does allow me access based on location. Is there another area where location is restricted? would appreciate some help, thx.

Hi. When Windows 11 was initially released, certain substantial feature of the Windows taskbar known from before was missing. I'm talking about 'Combine taskbar buttons and hide labels' and the option to set it to 'Never' (users tend to set it this way to always see the program icon along with it's label, not just the icon). At this moment, the feature has been available in widely released build of Windows 11 for months (Microsoft returned it after rewriting the taskbar code and after many complains), but it is not working correctly in conjunction with Firefox. When I close all windows and tabs of Firefox and restart the browser, only its icon is visible on the taskbar, not the label. Only when I open one more Firefox window, it starts to work as it should. Is it a known issue? Can we expect a fix to be made soon? Thanks.

I tried clearing cache and temp files. I tried a new profile. I tried a fresh install without logging in on account. Tried disabling all addons, running in safemode and incognito. Nothing works.

When opening in Chrome, it works as always. Same computer.

I assume that it's the same problem as this: https://support.mozilla.org/en-US/questions/1388431 but there is no solution.

https only mode is not active

browser.fixup.alternate.protocol is set to http from https browser.urlbar.autoFill is set to false

Nothing helped.

I get that this default makes sense but since so many local tools don't use http there should be at least 1 working option to disable this behavior at least for certain sites.