Showing questions tagged: Show all questions

NFS mounted home directory caused a hang condition in firefox. Repeatable when creating ebay listing

I am using centos 8.2 with it's firefox 78.7.0esr (64-bit) I also have my home directory mounted via NFS using the automounter system. In general firefox works fine in th… (read more)

I am using centos 8.2 with it's firefox 78.7.0esr (64-bit) I also have my home directory mounted via NFS using the automounter system.

In general firefox works fine in this configuration. However, when I get on Ebay and try creating a listing, firefox will hang when adding photos and/or moving the photo order. My NFS server will then start complaining about 'failed to contact remote rpcbind.

I try to close firefox and it doesn't It then will ask about a script running to long and offer to close. It won't I wait quite some time and it doesn't close About now the whole system is locked up and I may be able to get to the reboot menu I reboot and it won't because the process is hung. I usually have to power cycle to get things back.

I think if I waited for the automounter to time-out firefox may close at that time.

So the questions are: Is this supposed to work in an NFS environment? What is going on to cause the hang? Are there environment variables to move "some directory" to the local disk drive if that is the problem?

I sure hope someone can answer this for me. Thanks Warren

Asked by warrendodge 23 hours ago

Onglets

Hello a tous !!! Une mise a jour de firefox, et je me retrouve avec les onglets en hauts de la barre de recherche. Comment replacer la suite d'onglets sous la barre de m… (read more)

Hello a tous !!! Une mise a jour de firefox, et je me retrouve avec les onglets en hauts de la barre de recherche. Comment replacer la suite d'onglets sous la barre de marques pages juste au dessus de la fenêtre web.. Merci !!

Asked by Firefox Manu 21 hours ago

Firefox for Mac version 85.0.2 transferring data message keeps repeating (only with IPv6)

Hello. After updating Firefox on my Macbook, a website I visit now will not load, the message "transferring data" will appear and the status indicator looks like the data… (read more)

Hello. After updating Firefox on my Macbook, a website I visit now will not load, the message "transferring data" will appear and the status indicator looks like the data is loading, then when the status bar looks like its at 100%, it will start over and show "transferring data" again, and this keeps repeating indefinitely. This only happens when using an IPv6 address, it works fine with IPv4. This did not occur in Firefox 81.0.2. This also does not occur on other websites or with other browsers. I am looking at the notes for releases between 81.0.2 and 85.0.1 but am not sure what may have changed that would cause this. The website in question is a BMC GUI for a server I'm working on. If anyone has any ideas I'd really appreciate it. I tried the debugger in Firefox but not sure what I am looking for. I did set a breakpoint for caught exceptions, and the screenshot is attached if it helps any... Thanks!

Asked by jfriedman.seattle 21 hours ago

Download Firefox latest Version

When I turned on my computer this morning a message said I needed to download Firefox Update, so I clicked on that link. About a half hour later after it had also updated… (read more)

When I turned on my computer this morning a message said I needed to download Firefox Update, so I clicked on that link. About a half hour later after it had also updated Windows 10 a page popped up telling me I had been sent a code to my email that I would need to input. I have not received an email or junk mail with any code. However, it looks like I already have Version 86. Please help me with this issue. I am so overwhelmed with computer issues I'm on the verge of tears right now. My last Windows 10 update Did NOT install and I am not the only one with this issue, but NO help from Microsoft. Did Mozilla update Windows 10 to accept the new version of Firefox? I looked at your educated guess, clicked on Show Details, nothing came up. Then I clicked on Troubleshooting Information and Share Data. I don't know if you are able to see this list or not, I don't know what 99% of it means, but I did copy a few things that may be helpful. environmentVariables": {

   "MOZ_CRASHREPORTER_DATA_DIRECTORY": "C:\\Users\\Rhonda\\AppData\\Roaming\\Mozilla\\Firefox\\Crash Reports",
   "MOZ_CRASHREPORTER_EVENTS_DIRECTORY": "C:\\Users\\Rhonda\\AppData\\Roaming\\Mozilla\\Firefox\\Profiles\\fq7xq0bn.default-release-2\\crashes\\events",
   "MOZ_CRASHREPORTER_PING_DIRECTORY": "C:\\Users\\Rhonda\\AppData\\Roaming\\Mozilla\\Firefox\\Pending Pings",
   "MOZ_CRASHREPORTER_RESTART_ARG_0": "C:\\Program Files\\Mozilla Firefox\\firefox.exe",
   "MOZ_CRASHREPORTER_RESTART_ARG_1": "-os-restarted",
   "MOZ_CRASHREPORTER_STRINGS_OVERRIDE": "C:\\Program Files\\Mozilla Firefox\\browser\\crashreporter-override.ini"
 },
 "lockedPreferences": {
   "fission.autostart": false,
   "fission.autostart.session": false

I already have VERSION 86 according to the information on Firefox. But the message I had this morning specifically asked to download FIREFOX latest version. Please help. Rhonda

Asked by Rhonda 21 hours ago

Web push notifications options, e.g., placement, timeout, fonts, etc

I have been unable to find any information on customizing the look of Web push notifications. I would like to be able to change the time they remain on the screen, where… (read more)

I have been unable to find any information on customizing the look of Web push notifications. I would like to be able to change the time they remain on the screen, where they appear, how many can stack at a time. Is there any means to do this? Specifically, I would like to change the way Slack message announcements appear.

Asked by elupin 21 hours ago

firefox upgrade

bold textI recently chose to accept firefox suggestion to upgrade my account and now I'm not recognized anywhere and have to type everything as if I am a new customer, et… (read more)

bold textI recently chose to accept firefox suggestion to upgrade my account and now I'm not recognized anywhere and have to type everything as if I am a new customer, etc. How can I go back to my former setting?

Asked by justyna1 20 hours ago

preference's

I have noticed in my options section that I can specifically pick what I want. But, looking at it from a computer performance point of view (computer speed) which setting… (read more)

I have noticed in my options section that I can specifically pick what I want. But, looking at it from a computer performance point of view (computer speed) which settings are best? In the browsing category what should I select? There are more than a few options there. Which ones do I need for good computer performance? And which ones should be not used? In the applications category what selections should I pick? There are currently many-many selections there. Are all of them needed or required? Would it be advantages to remove some? Hopefully someone can help? Thank you.

Asked by sciencemagic 19 hours ago

Firefox sync not working correctly?

Hi all - having an issue with Firefox sync... I have a Windows desktop, a Linux desktop, two Linux laptops and an Android phone...all running Firefox and signed into the … (read more)

Hi all - having an issue with Firefox sync...

I have a Windows desktop, a Linux desktop, two Linux laptops and an Android phone...all running Firefox and signed into the same Firefox account.

I've got them all set to sync bookmarks, but I've noticed that I'll often add a bookmark, organize it into a folder on one machine and then it will either never sync onto my other machines, or it will simply sync into the Bookmarks Menu rather than into whatever folder I had organized it into on all my other machines...

Is there a way to get it working properly on all my machines?

Thanks!

Asked by Darkstrike 15 hours ago

How to switching multiple addon at once

I want to switching on/off multiple extension at once, but built-in addon management is not capable of it (even swiping out disable addon when switched) , and there are n… (read more)

I want to switching on/off multiple extension at once, but built-in addon management is not capable of it (even swiping out disable addon when switched) , and there are no addon doing it.

I imagines like this , which doing preset type of management.

Any help?

Asked by bleepblopp 14 hours ago

Hide tab bar when only one tab open.

Hello, I am looking for a way to hide my tab bar when there is only one tab open. I almost found the solution there: https://support.mozilla.org/en-US/questions/1297983 B… (read more)

Hello,

I am looking for a way to hide my tab bar when there is only one tab open. I almost found the solution there: https://support.mozilla.org/en-US/questions/1297983 But it is not exactly what i am looking for. This solution hides the tab but not the tab bar it self. I mean it leaves some black empty space because i use dark theme.

I kept looking for a solution to hide the container. I found this one: https://support.mozilla.org/en-US/questions/1271391 The problem is: this solution hides all the time the tab bar. No maters how many tabs opened.

I experimented mixing these two solution. I have try:

  1. tabbrowser-tabs tab[first-visible-tab="true"][last-visible-tab="true"] + #mainwindow:not([tabsintitlebar="true"]) #TabsToolbar {
 visibility: collapse;

}

I tried the other way around, with "#mainwindow" first. I tried without the "+" sign. But none worked out.

Asked by Gregory-F 8 hours ago

Update to Firefox 86.0 (Mac) renamed the app Firefox 2!

I just updated Firefox on my Mac to Firefox 86.0 and the app itself became named Firefox 2. When it is running the name on dock is now Firefox 2. I tried to change it b… (read more)

I just updated Firefox on my Mac to Firefox 86.0 and the app itself became named Firefox 2. When it is running the name on dock is now Firefox 2.

I tried to change it back to plain Firefox (removing the space character and 2 from its name in the Application folder).

When I did that an relaunched it the display looked a bit weird and all of my bookmarks were gone!

Changing it back to Firefox 2 made it well again. I have never, ever seen Firefox do this.

Asked by laffitte 6 hours ago

Firefox 85.0.1 Ubuntu 20.04 suddenly just blank

Firefox 85.0.1 Ubuntu 20.04 suddenly just blank no pages render, no access to preferences nothing except the menu bar - I have tried starting in safe mode, refreshing fir… (read more)

Firefox 85.0.1 Ubuntu 20.04 suddenly just blank no pages render, no access to preferences nothing except the menu bar - I have tried starting in safe mode, refreshing firefox, deleting profile info, starting a different portable version of firefox 78.3.0 also blank. There is a message when started from the command line about multiple gpu's detected (there are 2 nvidia gpu's one of which is passed through to a guest kvm) Other browsers work fine on the system and firefox worked fine until recently other than stopping using firefox on this machine which I would rather not do I seem to be out of options (note firefox works fine in the guest kvm's) [GFX1-]: More than 1 GPU from same vendor detected via PCI, cannot deduce device [GFX1-]: More than 2 GPUs detected via PCI, secondary GPU is arbitrary

Asked by michaeljeaffresoncass 6 hours ago

Saved Logins - Same Username Different URLs Same Domain

Saved a Login for Username X on Domain abc.com But there is also a login for same Username X on a sub/folder/url at domain abc/admin/login If I try to edit the sa… (read more)

Saved a Login for Username X on Domain abc.com

But there is also a login for same Username X on a sub/folder/url at domain abc/admin/login

If I try to edit the saved loging to manually add ww.abc.com/admin/ ( user / password ) it says the user name already exists.

I want the username/saved login to be tied to the login page not only the domain?

Asked by paulg1333 4 hours ago

virtual machine for SAS university edition blocked

hello, I use SAS University Edition to learn how to improve my SAS knowledge. It's installed via a VM and once installed, you just have to type http://http://localhost:10… (read more)

hello,

I use SAS University Edition to learn how to improve my SAS knowledge.

It's installed via a VM and once installed, you just have to type http://http://localhost:10080/ in the browser to open the SAS session. It worked for months, until new releases of Firefox. I disabled the HTTPS only mode on Firefox.

Now I get a Firefox error message "Cette adresse est interdite - Cette adresse utilise un port réseau inhabituel pour la navigation web. Par mesure de sécurité, Firefox a abandonné la requête." Forbidden address, due to unusual network port usage.

How can I log on my virtual machine? Where are the parameters that restrict the access to http sites and how can I manage them?

Thank you for your help, PY

Asked by pellgomz29 3 hours ago

Change back the logo

I'm tired of this brand minimalistic crap nonsense. In 2017, I didn't like the change but it didn't warrant me to do anything. The new logo doesn't even look like a globe… (read more)

I'm tired of this brand minimalistic crap nonsense. In 2017, I didn't like the change but it didn't warrant me to do anything. The new logo doesn't even look like a globe. Just revert it. And I'm not writing this because of "THE FOX IS GONE" meme. I know it's still there. The logo just looks really bad. Please revert it.

Asked by FireFoxxDude 1 hour ago

Playing video on SvtPlay is choppy

I want you guys to fix the video playing on SvtPlay and maybe other sites too. So that it is not choppy anymore. I just played a video from the documentaries section on s… (read more)

I want you guys to fix the video playing on SvtPlay and maybe other sites too. So that it is not choppy anymore. I just played a video from the documentaries section on svtplay.se and it was choppy. The streaming of channels was not choppy though.

I use the latest version of Linux Fedora and Firefox.

Asked by michael.91 1 hour ago

Change Right-Click Copy-Image File Format from TIFF to JPG

This problem might be unique to Mac OS, and may not even be a Firefox issue at all, but I had to try and see if there was an answer in here somewhere. I frequently use th… (read more)

This problem might be unique to Mac OS, and may not even be a Firefox issue at all, but I had to try and see if there was an answer in here somewhere. I frequently use the "copy-image" command from the right-click contextual menu from within Firefox. When I paste that image into a text message for example, it's converted to a TIFF, regardless of the actual format it's in on the website I found it. Unfortunately, Android phones won't accept a text with a TIFF image, causing a delivery failure. There's more reasons why this is annoying, but that's the main one. Is there any way to make sure that copy command retains the original format of the image when copied to the clipboard? Thanks.

Asked by Adam 10 minutes ago