I have a ZTE Open C running Firefox OS 1.3. I like the version 1.4 found at http://ftp.mozilla.org/pub/mozilla.org/labs/fxos-simulator How can I update to this version? …
I have a ZTE Open C running Firefox OS 1.3. I like the version 1.4 found at
How can I update to this version?
I working in cellular technical support and we don`t how configure APN setting on Firefox OS. I asking to explain me how you doing that. Thanks for helping.
I just got the latest ZTE Open, with FFOS_V1.0.0B02 . There are several wifi SSIDs in my university operate like this: first connect to AP without authentication; visit a…
I just got the latest ZTE Open, with FFOS_V1.0.0B02 . There are several wifi SSIDs in my university operate like this: first connect to AP without authentication; visit any web page; get redirected to the web login page; after authentication, can communicate with other sites. It turns out none of them works. Firefox complains "The address isn't valid" when get redirected. My other devices work find with those SSIDs.
Also note that 802.1x is not supported yet.
Get wifi connection is the first thing to do. Then I can try update the system and install apps. It's frustrating to get stuck at the very beginning. Please advise what should I try...
Hello, I've received my ZTE Open C (EU version) this Wednesday. Since I ran into some issues with Gaia in ff 1.3, I wanted to update it. I've followed guide from mdn ( h…
Hello, I've received my ZTE Open C (EU version) this Wednesday. Since I ran into some issues with Gaia in ff 1.3, I wanted to update it. I've followed guide from mdn ( https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/ZTE_OPEN_C ) and updated from git successfully. I've also created backup /system and /data dirs with adb pull. Problems arose today, when ff hung up on some application. I had to restart it, unfortunately by taking off battery. After restart, ff couldn't detect my sim card. It didnt change after more restarts (I tried to move sim a bit, no luck) so I decided it has to be software issue rather than hardware. I did device reset (or whatever it is called there). The process lasted for more than two hours and there was no progress bar. So I pulled battery out. Of course, device got "soft bricked". I was able to access bootloader, but trying to update from official update.zip on my SD card resulted in verification error, although it was ok last evening. I read a few article with people being in similar situation. I decided to go for https://github.com/martensms/zte-openc-rootkit . I followed the (pretty simple) guide. Unfortunately, after reboot zte lagged on Firefox OS screen. Now I can't access phone by adb. When I try to start bootloader, after a 5 seconds of FFOS logo I get white screen, which won't go away. My last remaining hope is that booting with VOL_DOWN pressed still works - I AM ABLE to connect with fastboot. I feel like I am only one mistake away from turning this phone into complete brick. Please, help me find the light.
Update ======================== I tried first step from the last link again, so I can provide you with output - http://pastebin.com/AM3e4Pu1. After executing script (flashing system.img and booting into recovery.img), I am now in system recovery. Adb can NOT detect my device. Aside from menu I get usual errors (which I had before it got bricked) + 1 extra (about /system) - http://pastebin.com/DwkCBvp0 Trying to "apply update from sdcard" (official update.zip which has worked once) adds following lines - http://pastebin.com/aLfk1CT0
Update ======================== I found this link http://download.ztedevices.com/UpLoadFiles/product/643/3598/soft/2014012010220351.zip (somewhere, I have probably closed the source tab already). File inside was called EU_DEV_FFOS_V1.1.0B06_UNFUS_SD_For_V1.1.zip, so I copied it on my sd card, put it back into zte and tried to apply update. Output was something I have expected - http://pastebin.com/4MQGNaF1
Update ======================== Phone won't boot now with battery. It doesn't do a thing. (OK, it boots, after 5 minutes) With battery removed I tried `fastboot flash system system.img` - system.img is from FFOS_EU_EBAY_P821A10V1.0.0B06_LOG_DL.zip package. Unfortunately, the process of flashing hangs. I gave it 5 hours while I slept. - http://pastebin.com/H1by22Qa
When I want to choose the default language. German is not available.. How can I add this language to the Operating System?
Can i install firefox OS in my Samsung galaxy Y ?. If so please share a walkthrough on how to do it.
Can i install firefox OS in my Samsung galaxy Y ?. If so please share a walkthrough on how to do it.
I just received a ZTE Open device in the mail today, and after playing around with it a bit, I noticed that every time I tried to check for system updates, it would show …
I just received a ZTE Open device in the mail today, and after playing around with it a bit, I noticed that every time I tried to check for system updates, it would show me one 13.xx MB update, which I downloaded, apparently applied, and the phone seemed to restart itself, but then I would be shown the same (??) update available. The phone is without a SIM card, just playing with it connected via Wifi, with the 4GB microSD card installed. Then, this evening, I got an error message, which apparently was recorded on the SD card, a file called recovery.log (contents follow):
Starting recovery on Fri Aug 23 07:29:21 2013 framebuffer: fd 4 (320 x 480) recovery filesystem table ========================= 0 /tmp ramdisk (null) (null) 0 1 /boot mtd boot (null) 0 2 /amss mtd amss (null) 0 3 /appsbl mtd appsbl (null) 0 4 /mibib mtd mibib (null) 0 5 /qcsbl mtd qcsbl (null) 0 6 /oemsbl1 mtd oemsbl1 (null) 0 7 /oemsbl2 mtd oemsbl2 (null) 0 8 /splash mtd splash (null) 0 9 /cache yaffs2 cache (null) 0 10 /data yaffs2 userdata (null) 0 11 /misc mtd misc (null) 0 12 /recovery mtd recovery (null) 0 13 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/mmcblk0 0 14 /system yaffs2 system (null) 0 I:Got arguments from /cache/recovery/command mtd: successfully wrote block at 0 I:Set boot command "boot-recovery" Command: "/sbin/recovery" ro.secure=1 ro.allow.mock.location=0 ro.debuggable=0 ro.build.id=IMM76D ro.build.display.id=OPEN_US_DEV_FFOS_V1.0.0B01 ro.build.version.incremental=eng..20130724.030603 ro.build.version.sdk=15 ro.build.version.codename=REL ro.build.version.release=4.0.4 ro.build.sw_internal_version=US_DEV_FFOS_V1.0.0B01 ro.build.baseband_version=P752D04B02 ro.build.firmware_revision=V1.01.00.01.019.144 ro.build.date=2013年 07月 24日 星期三 03:06:47 CST ro.build.date.utc=1374606407 ro.build.type=user ro.build.user= ro.build.host=ThinkCentre2-XXXX ro.build.tags=test-keys ro.product.model=roamer2 ro.product.external_model=ZTE OPEN ro.product.brand=ZTE ro.product.name=roamer2 ro.product.device=roamer2 ro.product.board=roamer2 ro.product.cpu.abi=armeabi-v7a ro.product.cpu.abi2=armeabi ro.product.manufacturer=ZTE ro.product.locale.language=en ro.product.locale.region=US ro.wifi.channels= ro.board.platform=msm7627a ro.build.product=roamer2 ro.build.description=roamer2-user 4.0.4 IMM76D eng..20130724.030603 test-keys ro.build.fingerprint=ZTE/roamer2/roamer2:4.0.4/IMM76D/eng..20130724.030603:user/test-keys ro.build.characteristics=default rild.libpath=/system/lib/libril-qc-1.so rild.libargs=-d /dev/smd0 persist.rild.nitz_plmn= persist.rild.nitz_long_ons_0= persist.rild.nitz_long_ons_1= persist.rild.nitz_long_ons_2= persist.rild.nitz_long_ons_3= persist.rild.nitz_short_ons_0= persist.rild.nitz_short_ons_1= persist.rild.nitz_short_ons_2= persist.rild.nitz_short_ons_3= ril.subscription.types=NV,RUIM DEVICE_PROVISIONED=1 debug.sf.hw=1 debug.composition.7x27A.type=mdp debug.composition.7x25A.type=mdp dalvik.vm.heapsize=128m persist.cne.UseCne=none persist.cne.bat.range.low.med=30 persist.cne.bat.range.med.high=60 persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml persist.cne.loc.policy.user=/system/etc/UserPolicy.xml persist.cne.bwbased.rat.sel=false persist.cne.snsr.based.rat.mgt=false persist.cne.bat.based.rat.mgt=false persist.cne.rat.acq.time.out=30000 persist.cne.rat.acq.retry.tout=0 persist.cne.fmc.mode=false persist.cne.fmc.init.time.out=30 persist.cne.fmc.comm.time.out=130 persist.cne.fmc.retry=false media.stagefright.enable-player=true media.stagefright.enable-meta=false media.stagefright.enable-scan=true media.stagefright.enable-http=true media.stagefright.enable-fma2dp=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true ro.opengles.version=131072 ro.use_data_netmgrd=true persist.data.ds_fmc_app.mode=0 persist.ims.regmanager.mode=0 ro.bluetooth.request.master=true ro.qualcomm.bluetooth.sap=false ro.bluetooth.remote.autoconnect=true persist.sys.strictmode.visual=false persist.omh.enabled=1 ro.config.ehrpd=true ro.qualcomm.cabl=1 ro.fm.analogpath.supported=true ro.fm.transmitter=false ro.fm.mulinst.recording.support=false ro.hw_plat=7x27a ro.emmc.sdcard.partition=18 ro.screen.layout=normal debug.enabletr=false debug.camcorder.disablemeta=0 persist.fuse_sdcard=false debug.camera.landscape=true ro.max.fling_velocity=4000 hwui.render_dirty_regions=false httplive.enable.discontinuity=true power.webview.DM=false dalvik.vm.heapstartsize=5m dalvik.vm.heapgrowthlimit=36m org.bluez.device.conn.type=boolean keyguard.no_require_sim=true ro.com.android.dataroaming=false ro.com.android.dateformat=MM-dd-yyyy ro.config.ringtone=Ring_Synth_04.ogg ro.config.notification_sound=pixiedust.ogg ro.config.alarm_alert=Alarm_Classic.ogg ro.vendor.extension_library=/system/lib/libqc-opt.so ro.display.colorfill=1 ro.moz.ril.emergency_by_default=true ro.moz.omx.hw.max_width=640 ro.moz.omx.hw.max_height=480 ro.moz.cam.0.sensor_offset=270 ro.moz.ril.simstate_extra_field=true persist.sys.ztelog.enable=1 persist.radio.add_power_save=1 ro.sensor.arch.type=new net.bt.name=Android net.change=net.bt.name dalvik.vm.stack-trace-file=/data/anr/traces.txt ro.factorytest=0 ro.serialno=ROAMER2 ro.bootmode=unknown ro.baseband=msm ro.carrier=unknown ro.bootloader=unknown ro.hardware=roamer2 ro.revision=0 ro.emmc=0 init.svc.recovery=running E:Error in /cache/recovery/log (No space left on device) E:Error in /cache/recovery/last_log (No space left on device) mtd: successfully wrote block at 0 I:Set boot command "" E:Error in /cache/recovery/log (No space left on device) E:Error in /cache/recovery/last_log (No space left on device)
The SD card also contains a zip file in updates/fota/update.zip, which in turn contains patch/system/P752D04_DEV_US_20130726.zip, which contains: amss.mbn (about 20 meg) and boot.img (about 4 meg).
i set the password for lock screen, then i lock the device (zte open) but when i try to unlock the device , the pass fail .
I love minimalist systems (like archlinux). This is why I buy a firefox os phone, who gives me more control over to wich applications may I have or not. I believe pintere…
I love minimalist systems (like archlinux). This is why I buy a firefox os phone, who gives me more control over to wich applications may I have or not.
I believe pinterest is not a essential system application (as some others), so I want to uninstall it. Is it possible?
I plan to buy one of the two new phones from Spain / Poland running Firefox OS and I'm curios to know if they come with a network lock that will prevent me to use it from…
I plan to buy one of the two new phones from Spain / Poland running Firefox OS and I'm curios to know if they come with a network lock that will prevent me to use it from Romania, or will they come unlocked?
I just got my zte touch phone and I went to take some pictures with it and it asked if I wanted them to be saved in the photos place or the gallery and I accidentally pre…
I just got my zte touch phone and I went to take some pictures with it and it asked if I wanted them to be saved in the photos place or the gallery and I accidentally pressed photos and I wanted them to go to the gallery instead so how can I fix this?
I couldn't find a better place to post this, so I'm trying on here. I'm in the market for a tablet (high-end), and I'm holding off on getting an Android-powered one becau…
I couldn't find a better place to post this, so I'm trying on here.
I'm in the market for a tablet (high-end), and I'm holding off on getting an Android-powered one because of Firefox OS. However, I have some general questions and concerns regarding performance, software and hardware. Here they are.
1. Is the Firefox OS interface as responsive as a native experience on say an iPad or an Android tablet? (Is there any lag on swipes between screens, button presses, etc?) If not, will it be in the future?
2. Will I miss the Android marketplace or the Apple app store, being restricted to only HTML5 apps? Do you think this will become an irrelevant question as the HTML5 app ecosystem grows?
3. Do you think the quality of HTML5 apps will be inferior to those from existing app stores because they are free?
4. Will the Firefox browser be the only one available in Firefox OS? (i.e. will there be the option to use Chrome, Opera or any other browser if the user so wishes?)
5. Will Firefox OS include useful utility apps, such as an alarm clock, a calendar, a weather app, etc?
6. I read a lot, both on the web (news, video game reviews), as well as ebooks. Will Firefox OS on a tablet be a pleasant experience conducive to e-reading? (Will it include a good ebook reader app?)
7. Will there be a high-end Firefox OS tablet that is comparable in specs to the Nexus 10? (i.e. impressive screen resolution, powerful CPU/GPU, lots of inputs/outputs like USB, HDMI, microSD, etc) When do you think such a device might become available?
8. Would it be possible to flash Firefox OS onto say a Nexus 10 or other tablet or phone if one wanted to use it as their OS instead?
Hello, I use since a few days a GP Revolution installed with Firefox OS 1.3. There is a strange bug with the sdcard. When I boot the phone, the sd is recognized, I can ta…
Hello, I use since a few days a GP Revolution installed with Firefox OS 1.3. There is a strange bug with the sdcard. When I boot the phone, the sd is recognized, I can take pictures, listen my musics. After a few minutes, the sdcard is not recognized anymore until I reboot the phone. I've tried the sd on another smartphone and it's working fine. If anybody have an idea.... Thanks, Christian.
My phone is using lots of data even at night when I'm asleep. My usage report says I have only used 167mb but AT&T says I have used almost 3gb. So I turned off the …
My phone is using lots of data even at night when I'm asleep. My usage report says I have only used 167mb but AT&T says I have used almost 3gb. So I turned off the data on the phone and it stopped. My next test is the mail app. I have noticed when it checks for my mail at gmail it hangs and just keeps on spinning. I have to reboot the phone to get it to stop. So maybe the mail app is chewing through my data when it gets hung up.. Any ideas?? I love the phone just wish it would not use 30mb an hour.
Thanks for your help.
Phone zte open c. Firefoz os 1.3 Procedure error: 1. Insert sim card 2. Power on phone 3. The phone is not used for 1-5 minutes. The screen does not light up. 4. To wake …
Phone zte open c. Firefoz os 1.3 Procedure error: 1. Insert sim card 2. Power on phone 3. The phone is not used for 1-5 minutes. The screen does not light up. 4. To wake the phone, push the button Power. Phone does not respond. 5. I have to remove the battery to become operational again. 6. As I leave the phone without the use of, the situation repeats itself.
I got my ZTE Open C phone way recently. And I'm pretty sure out of nowhere, these double squiggles have appeared on my status bar. I've scoured my settings and rebooted a…
I got my ZTE Open C phone way recently. And I'm pretty sure out of nowhere, these double squiggles have appeared on my status bar. I've scoured my settings and rebooted and it's stickin' around. What does it mean?
Aha, the icon I'm referring is the leftmost (save for notifications) one on the status bar here
Thanks very kindly.