Showing questions tagged: Show all questions
  • Solved

Uninstall All Extensions/Add-Ons via Intune

I am trying to manage Firefox for company devices via Intune and would like to know if there is a way to uninstall all extensions/add-ons besides one or two approved ones… (read more)

I am trying to manage Firefox for company devices via Intune and would like to know if there is a way to uninstall all extensions/add-ons besides one or two approved ones.

I have been able to import the Firefox AMDX into Intune and have made a policy to install uBlock (which works without issue) and I can uninstall specific extensions/add-ins via their Extension ID (also without issue), however I can't see a way to uninstall all extensions. If I try and put a wildcard in the Extension ID field, nothing is affected.

We have a large number of devices with their own user-installed extensions so auditing this and then updating a policy manually with specific extension IDs may be quite painful.

Asked by matthew.winter 3 months ago

Answered by matthew.winter 3 months ago

  • Solved
  • Archived

How to Add preferences to Firefox through Windows Server Group Policy

Hi everyone. I have installed Firefox on all windows 10 workstations and I have also installed latest Firefox Group Policy ADMX on Server. I need to set some preferences … (read more)

Hi everyone. I have installed Firefox on all windows 10 workstations and I have also installed latest Firefox Group Policy ADMX on Server. I need to set some preferences on all Workstations. The preferences that I want to set are the ones that can be found in about:config.

But the problem is that only some of these preferences exist in Group Policy by default and it says "deprecated". I know that I can add additional about:config preferences in a Group Policy object called "Preferences". But no matter how I enter the format or how I change the JASON file, no preference policy is applied to Firefox in workstations. By the way when I change "Preferences" gpo in group Policy the next Policy called "Preferences (JASON on one file)" does also change. I have thoroughly searched the web and Mozilla support and have tested all suggestions but all to no avail. Can you please help me and Give me an example of how to do that? I would appreciate any answer in advance.

Asked by manoochehr.zangooei 8 months ago

Answered by TyDraniu 8 months ago

  • Solved
  • Archived

Application Handlers

Hi All, I have been on the struggle bus lately trying to get the application handlers set properly in our GPO. I am trying to get PDF, webp, avif to open in browser, and… (read more)

Hi All, I have been on the struggle bus lately trying to get the application handlers set properly in our GPO. I am trying to get PDF, webp, avif to open in browser, and jnlp to auto launch Java. Any help will be greatly appreciated!

{"application/pdf":{"action":3,"extensions":["pdf"]},"image/webp":{"action":3,"extensions":["webp"]},"image/avif":{"action":3,"extensions":["avif"]},"application/x-java-jnlp-file":{"action":4,"handlers":[{"name":"javaws.exe","path":"C:\\Program Files (x86)\\Java\\jre-1.8\\bin\\javaws.exe"}],"extensions":["jnlp"]}}

Asked by Chris Wilkerson 9 months ago

Answered by Mike Kaply 9 months ago

  • Solved
  • Archived

Extensions Management .json is not working

Hello, I am trying to create a management policy for extensions where all themes are allowed, some extensions are force installed, other specified ones are allowed, and … (read more)

Hello,

I am trying to create a management policy for extensions where all themes are allowed, some extensions are force installed, other specified ones are allowed, and anything else is blocked. I have been scouring the web looking for samples and I just can't get it to work as intended. Here is a sample of what I have written.

{ "*": { "blocked_install_message": "IT has blocked the installation of UNAPPROVED add-ons. Please contact the IT Service Desk to request approval.", "install_sources": "https://addons.mozilla.org/*", "allowed_types": ["theme","extension"] }, "plugin@okta.com": { "installation_mode": "force_installed", "install_url": "https://addons.mozilla.org/firefox/downloads/file/3601147/okta_browser_plugin.xpi" }, "support@lastpass.com": { "installation_mode": "force_installed", "install_url": "https://addons.mozilla.org/firefox/downloads/latest/lastpass-password-manager/latest.xpi" }, "developer@zoom.us": { "installation_mode": "allowed", "install_url": "https://addons.mozilla.org/firefox/downloads/file/4212428/zoom_new_scheduler-2.1.52.xpi" }, "info@katalon.com": { "installation_mode": "allowed", "install_url": "https://addons.mozilla.org/firefox/downloads/file/3826743/katalon_automation_record-5.5.3.xpi" } }

In this current state, I am allowed to install themes, I get the forced installs, but I can install ANY extension. I don't want that.

If I modify the blocking section with [ "installation_mode": "blocked", ], then I only get the force installed plugins and I can't do anything else. It even removes any previously installed themes or plugins not explicitly forced in. The allowed plugins can't be installed either.

I have also tried it without the "extensions" allowed_type but the result did not change. To recap, I need to block any extensions not explicitly pushed or allowed. Would anyone be able to assist and point out what I may be missing please?

~Regards

Asked by yaponte 11 months ago

Answered by yaponte 11 months ago

  • Solved
  • Archived

How to disable Quic protocol in Windows with MS Intune

Hello I am looking for a way to disable the QUIC protocol in Firefox through Intune. tried by below value but its not working, anyone did the settings in MS Intune for W… (read more)

Hello

I am looking for a way to disable the QUIC protocol in Firefox through Intune. tried by below value but its not working, anyone did the settings in MS Intune for Windows? <enabled/> <data id="JSON" value=' {

 "network.http.http3.enable": {
   "Value": 0,
   "Status": "user"
 },

{

 "network.http.http3.enable_0rtt": {
   "Value": 0,
   "Status": "user"
 }

}'/>

Thanks

Asked by Shri Sivakumaran 11 months ago

Answered by Shri Sivakumaran 11 months ago

  • Solved
  • Archived

How to disable Quic protocol in Mac with Jamf

Hello I am looking for a way to disable the QUIC protocol in Firefox through Jamf Pro. tried by below value but its not working, anyone did the settings for Mac? <… (read more)

Hello

I am looking for a way to disable the QUIC protocol in Firefox through Jamf Pro. tried by below value but its not working, anyone did the settings for Mac?

<plist version="1.0"> <dict> <key>Preferences</key> <dict> <key>network.http.http3.enable</key> <dict> <key>Value</key> <false/> <key>Status</key> <string>user</string> </dict> <key>network.http.http3.enable_0rtt</key> <dict> <key>Value</key> <false/> <key>Status</key> <string>user</string> </dict> </dict> </dict> </plist>


Thanks

Asked by Shri Sivakumaran 11 months ago

Answered by Mike Kaply 11 months ago

  • Solved
  • Archived

Firefox Intune OMA-URI error

Dear Everyone, Facing issue with deploying Configuration Profile for Extension Settings via Intune. Tried ADMX imported template with adding there "block all extensions"… (read more)

Dear Everyone, Facing issue with deploying Configuration Profile for Extension Settings via Intune. Tried ADMX imported template with adding there "block all extensions" and allow certain ones. Worked perfect in Jamf, for Intune failing all time. We are using Firefox v.121, policies are for v.120, but I am in doubt that this is the issue. Can someone review and let me know if there any issue or may be changes? Using latest instructions https://mozilla.github.io/policy-templates/#extensionsettings Also here is my OMA, very easy.

OMA used ./Device/Vendor/MSFT/Policy/Config/Firefox~Policy~firefox~Extensions/ExtensionSettings

Value(string):

<enabled/> <data id="ExtensionSettings" value=' {

 "*": {
   "blocked_install_message": "Security Test",
   "installation_mode": "blocked",
   "allowed_types": ["extension"]
 },
 "{bf855ead-d7c3-4c7b-9f88-9a7e75c0efdf}": {
   "installation_mode": "force_installed",
   "install_url": "https://addons.mozilla.org/firefox/downloads/latest/zoom-new-scheduler/latest.xpi"
 },
   "@react-devtools": {
   "installation_mode": "allowed"
 }

}'/>

Asked by Valery Volos 11 months ago

Answered by Mike Kaply 11 months ago

  • Solved
  • Archived

Fully disable Pocket to alleviate DNS requests

We are working on implementing Firefox for Enterprise and rolling it out through Intune/Company Portal, one challenge we are encountering is that we have disabled Pocket … (read more)

We are working on implementing Firefox for Enterprise and rolling it out through Intune/Company Portal, one challenge we are encountering is that we have disabled Pocket as thoroughly as we can (followed the guide from Mozilla https://support.mozilla.org/en-US/kb/disable-or-re-enable-pocket-for-firefox) and we are still seeing requests go out to "img-getpocket.cdn.mozilla.net" we do not want Pocket available at all, we do not want queries made to those domains, is it not possible to completely eradicate Pocket?

It wouldn't be a problem but our AV solution (MDE) has a popup every time the URL is queried and blocked.

Attached image of our configuration profile for Pocket.

Asked by null_panda 1 year ago

Answered by cor-el 1 year ago

  • Solved
  • Archived

Certificate problem accessing an internal company website

I am trying to reach an internal company website (www.gqma.drw), with a certificate chain rooted in a company certificate authority. This works fine in Chrome, and worked… (read more)

I am trying to reach an internal company website (www.gqma.drw), with a certificate chain rooted in a company certificate authority. This works fine in Chrome, and worked in Firefox on my previous computer. But i recently got a new machine, and something somewhere is not quite right. I get an error message looking like this (between the ~~~s):

~~~ Someone could be trying to impersonate the site and you should not continue.

Web sites prove their identity via certificates. Firefox does not trust www.gqma.drw because its certificate issuer is unknown, the certificate is self-signed, or the server is not sending the correct intermediate certificates.

Error code: SEC_ERROR_UNKNOWN_ISSUER

View Certificate ~~~

If i click on the error code, i get these details:

~~~ https://www.gqma.drw/

Peer's Certificate issuer is not recognised.

HTTP Strict Transport Security: false HTTP Public Key Pinning: false

Certificate chain:


BEGIN CERTIFICATE-----

MIICczCCAhigAwIBAgIUcg0ZTKoxYO3E5288qtNnymZ/L6AwCgYIKoZIzj0EAwIw NzEMMAoGA1UEChMDRFJXMRQwEgYDVQQLDAtJU1NAZHJ3LmNvbTERMA8GA1UEAxMI U1NETlMgQ0EwHhcNMjIwMzA5MTQxOTAwWhcNMjQwMzA4MTQxOTAwWjA5MQwwCgYD VQQKEwNEUlcxFDASBgNVBAsMC0lTU0BkcncuY29tMRMwEQYDVQQDEwoqLmdxbWEu ZHJ3MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEfXDxyLTebEuPHmneR4faNHoQ PouLPrBqOKnDOW/T+eexbAHcghiZqcQHoHW/Qo/kNQZYPhoHeMZK1ACdvnFTUaOB /zCB/DAOBgNVHQ8BAf8EBAMCBaAwEwYDVR0lBAwwCgYIKwYBBQUHAwEwDAYDVR0T AQH/BAIwADAdBgNVHQ4EFgQUvuzqIs1O1ioHT3qF+olSZ3dDseEwHwYDVR0jBBgw FoAUjGD9eMez/VkLc5nlNkg/U6dBgmUwNQYIKwYBBQUHAQEEKTAnMCUGCCsGAQUF BzABhhlodHRwOi8vb2NzcC5pc3MuZHJ3L3NzZG5zMB8GA1UdEQQYMBaCCiouZ3Ft YS5kcneCCGdxbWEuZHJ3MC8GA1UdHwQoMCYwJKAioCCGHmh0dHA6Ly9jZXJ0cy5p c3MuZHJ3L3NzZG5zL2NybDAKBggqhkjOPQQDAgNJADBGAiEAtEj7K/C2IHMzh175 9TpPu74YktH/1WJM12zUNIioi30CIQDpLqn09bmTFDgQDkg+0YHu1YSBTlCArWYJ KUxQUa0KPQ==


END CERTIFICATE-----
BEGIN CERTIFICATE-----

MIIB3DCCAYKgAwIBAgIUeLNrkgHyp2GhO6Ee4fyvVbGaUg0wCgYIKoZIzj0EAwIw OjEMMAoGA1UEChMDRFJXMRQwEgYDVQQLDAtJU1NAZHJ3LmNvbTEUMBIGA1UEAxML SVNTIFJvb3QgQ0EwHhcNMTcwMzAxMjA0MzAwWhcNMjcwMjI3MjA0MzAwWjA6MQww CgYDVQQKEwNEUlcxFDASBgNVBAsMC0lTU0BkcncuY29tMRQwEgYDVQQDEwtJU1Mg Um9vdCBDQTBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABAjg18NvaBfwKP0BC/9U Cppc1W2rfSqzsY4KCRIAubItoMyQ13zp25KjVg9IF7Uru7cWQcUMvwf4+2Gb/4m4 sFSjZjBkMA4GA1UdDwEB/wQEAwIBBjASBgNVHRMBAf8ECDAGAQH/AgEBMB0GA1Ud DgQWBBSA3cairIJP/ooZLqrq+L9hSNwxczAfBgNVHSMEGDAWgBSA3cairIJP/ooZ Lqrq+L9hSNwxczAKBggqhkjOPQQDAgNIADBFAiAgvGnmTJgMosKFYuRJ7HZMuD/p ZTNapVJltFiGzKAtewIhAJMVQ72U+m7kLNRw6ej7icBQ9d+T4MuhGyJEeYeX5wR4


END CERTIFICATE-----
BEGIN CERTIFICATE-----

MIICYjCCAgigAwIBAgIUDZxs4OPknZA8SgUkWZ7EncHkYVIwCgYIKoZIzj0EAwIw OjEMMAoGA1UEChMDRFJXMRQwEgYDVQQLDAtJU1NAZHJ3LmNvbTEUMBIGA1UEAxML SVNTIFJvb3QgQ0EwHhcNMTcwMzAxMjA0NDAwWhcNMjcwMjI3MjA0NDAwWjA3MQww CgYDVQQKEwNEUlcxFDASBgNVBAsMC0lTU0BkcncuY29tMREwDwYDVQQDEwhTU0RO UyBDQTBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABNsaSU2QU1Z5ktRf19DaXZk6 TrPko0TPZFTSYFH9bPxVJ4guUfGnN5nZ7vQajX2NJJLZEL9TZGYSsE8RD/ftcsij ge4wgeswDgYDVR0PAQH/BAQDAgGmMB0GA1UdJQQWMBQGCCsGAQUFBwMBBggrBgEF BQcDAjASBgNVHRMBAf8ECDAGAQH/AgEAMB0GA1UdDgQWBBSMYP14x7P9WQtzmeU2 SD9Tp0GCZTAfBgNVHSMEGDAWgBSA3cairIJP/ooZLqrq+L9hSNwxczA1BggrBgEF BQcBAQQpMCcwJQYIKwYBBQUHMAGGGWh0dHA6Ly9vY3NwLmlzcy5kcncvc3NkbnMw LwYDVR0fBCgwJjAkoCKgIIYeaHR0cDovL2NlcnRzLmlzcy5kcncvc3NkbnMvY3Js MAoGCCqGSM49BAMCA0gAMEUCIBU5FNCu7ZmE7H1Oautblig4iA5JIgOO+4D/do2c pQ8IAiEAkIdZb5Doptfk1C5uofcvww3E0ZrSG98ZJ2+TW9sz4VA=


END CERTIFICATE-----

~~~

If i click 'View Certificate', i get a chain of three certificates:

  1. Subject common name = *.gqma.drw, issuer common name = SSDNS CA, subject key ID = BE:EC:EA:22:CD:4E:D6:2A:07:4F:7A:85:FA:89:52:67:77:43:B1:E1
  2. Subject common name = SSDNS CA, issuer common name = ISS Root CA, subject key ID = 8C:60:FD:78:C7:B3:FD:59:0B:73:99:E5:36:48:3F:53:A7:41:82:65
  3. Subject common name = ISS Root CA, issuer common name = SS Root CA, subject key ID = 80:DD:C6:A2:AC:82:4F:FE:8A:19:2E:AA:EA:F8:BF:61:48:DC:31:73

If i go to Settings > Privacy & Security > View Certificates > Authorities, i can find both the SSDNS CA and ISS Root CA certificates. As far as i can tell, they are identical - i can open the certificate from 'View Certificate' and the corresponding one from the certificate manager and flip between tabs, and all the details are the same.

I am using Firefox 120.0, via a flatpak, on Ubuntu 22. I have given the flatpak access to /etc/ssl/certs, where my company's internal CA certificates are located.

To me, this seems like it should all work. The server has a certificate signed by an internal CA, which is signed by another internal CA, and both those internal CA certificates are in my certificate manager. So what is going wrong? Is there any way i can debug this?

Asked by twic 1 year ago

Answered by Mike Kaply 1 year ago

  • Solved
  • Archived

deploying firefox-add-ons via group policies doesn't work anymore after proxy-change

Hello, I used to deploy add-ons via group policies - this worked like a charm: Firefox esr (91.11.0esr x64), ADMX-templates in Sysvol\PolicyDefinitions, Group Policies: … (read more)

Hello,

I used to deploy add-ons via group policies - this worked like a charm: Firefox esr (91.11.0esr x64), ADMX-templates in Sysvol\PolicyDefinitions, Group Policies: User configuration, administrative templates, mozilla, firefox, add-ons --> install add-ons --> https://addons.mozilla.org/firefox/downloads/file/1234567/goodaddon-1.0.01.xpi

A few months ago, we had to change our network-configuration. We were using a proxy before, but our proxy had direct access to the internet. Now our proxy forwards everything to another proxy. Since about that time, add-on-deployment via gpo doesn't work anymore. It could be something else, but i suspect the proxy-change.

I tried to deploy unc-paths, internal websites and different syntaxes; none of this works:

  • http://192.168.100.10/goodaddon-1.0.01.xpi
  • http://internalwebsite/goodaddon-1.0.01.xpi
  • https://192.168.100.10/goodaddon-1.0.01.xpi
  • https://internalwebsite/goodaddon-1.0.01.xpi
  • \\192.168.100.20\netshare\goodaddon-1.0.01.xpi
  • \\internalfileserver\netshare\goodaddon-1.0.01.xpi
  • file://///192.168.100.20/netshare/goodaddon-1.0.01.xpi
  • file://///internalfileserver/netshare/goodaddon-1.0.01.xpi

As you can see I tried using internal sites, so that no proxy would be needed. And I also added these sites to the allowed add-on-installation-sites (computer configuration, same group policy). The sites are all accessible; if I enter these addresses as url, firefox can access the xpi-file.

I know how to pack add-ons into the firefox-setup-file; that still works. But first of all, firefox is already installed on most of my clients. Second, after a fresh installation of firefox with this self-created package, all add-ons are installed, but not activated. And I would like to restrict activation/deactivation of add-ons via gpo.

  1. 1 Are there other ways to deploy add-ons in a domain-network (e.g. script-based)?
  2. 2 Are there any logs where I could find out what exactly goes wrong?
  3. 3 Are there any other syntaxes I could try (group policy urls)?
  4. 4 Can anyone guess what the problem is (why it is not working anymore)?

Help would be very much appreciated.

Best regards.

Asked by mozilla355 2 years ago

Answered by mozilla355 2 years ago

  • Solved
  • Archived

AutoConfig Alert

Good morning, I'm reaching out to see if I can get some assistance with Firefox on of our network. I'm System Admin at Goodfellow AFB. I've tried searching this issues … (read more)

Good morning,

I'm reaching out to see if I can get some assistance with Firefox on of our network. I'm System Admin at Goodfellow AFB. I've tried searching this issues on the web and found similar issues but solutions that were recommend online have not worked for us. Yes I have uninstalled Firefox completely and installed it from scratch. I know it has something to do with autoconfig file but not sure what exactly I'm looking for. Thanks.

Asked by Chase Cathey 2 years ago

Answered by jscher2000 - Support Volunteer 2 years ago

  • Solved
  • Archived

What is the proper format for the ExtensionSettings policy registry key/value that is used to manage browser extension settings?

When looking at the ExtensionSettings page for Firefox or Chrome they both use an example that shows the registry key Software\Policies\Mozilla\Firefox\ExtensionSettings… (read more)

When looking at the ExtensionSettings page for Firefox or Chrome they both use an example that shows the registry key Software\Policies\Mozilla\Firefox\ExtensionSettings (REG_MULTI_SZ) being set to a long JSON string with every extension ID and the settings for that particular ID. For example...

{

 "*": {
   "blocked_install_message": "Custom error message.",
   "install_sources": ["https://yourwebsite.com/*"],
   "installation_mode": "blocked",
   "allowed_types": ["extension"]
 },
 "uBlock0@raymondhill.net": {
   "installation_mode": "force_installed",
   "install_url": "https://addons.mozilla.org/firefox/downloads/latest/ublock-origin/latest.xpi"
 },
 "https-everywhere@eff.org": {
   "installation_mode": "allowed"
 }

}

The problem with this method is that if I am installing an extension, and I overwrite what already exists in Software\Policies\Mozilla\Firefox\ExtensionSettings then all of those other settings get removed. So even if I am a non-malicious actor and just make a mistake with my installer I can easily delete every other extension's settings. Instead what I have to do is during install I have to read the current value of Software\Policies\Mozilla\Firefox\ExtensionSettings and then insert my extension's settings into the JSON blob.

So the examples that Firefox and Chrome provides do of course work, however they do not make very much sense to me. Why would it be formatted this way since all of those are additional key/value pairs and that is exactly what the registry excels at storing. So why put all of those into a single key/value instead of breaking them into multiple?

Additionally breaking them a part into multiple key/value pairs does work! So if instead of the example above I were to split them into multiple key value pairs it works just fine!

Software\Policies\Mozilla\Firefox\ExtensionSettings

   uBlock0@raymondhill.net
       "installation_mode": "force_installed",
       "install_url": "https://addons.mozilla.org/firefox/downloads/latest/ublock-origin/latest.xpi"

So knowing that this way with multiple key/value pairs works why am I bothering to ask this question at all instead of just doing it the way that makes sense to me? Well the issue is that by breaking it up into multiple key value pairs it actually overrides the other method and makes it so that all those registry settings are ignored. So it doesn't delete them but it still leaves me with nearly the exact same problem.

While I believe "my" way is superior because it uses the registry in a more common sense route, if that is not what the majority of extension developers do then it doesn't matter and I should be conforming to the other way.

As I am typing this question up I did realize just how hard/annoying it is to properly format and make it clear and digestible what the multi key/value format of the registry would look like instead of being a JSON string. So perhaps that is the reason why all the documentation puts it all as one JSON string?

Asked by perihwk+firefox 1 year ago

Answered by Mike Kaply 1 year ago

  • Solved
  • Archived

Firefox Install Location/Versions

Hello, I am working to convert my Org to Firefox ESR, but in order to this I need to uninstall the per user install of Firefox. We have many users that have the Firefox.… (read more)

Hello,

I am working to convert my Org to Firefox ESR, but in order to this I need to uninstall the per user install of Firefox. We have many users that have the Firefox.exe located in their Local Appdata folder. So I need to test the uninstall of the Appdata install and then the install of ESR. But the problem is I haven't been able to get Firefox to automatically install into the appdata folder. How am I able to do this? The users who have it installed in the appdata folder are not admins on their computers. When I'm testing I've also been using a normal user account. Please let me know how I can install the exe into the appdata folder automatically without me specifically placing it there or which exe version I need to do this.

Thanks!

Asked by tmlloyd 1 year ago

Answered by tmlloyd 1 year ago

  • Solved
  • Archived

Firefox GPO: Add Custom Search Engine

We would like to install a custom search engine using Firefox policies. We have the latest version of Firefox installed. We have the latest admx files installed on our … (read more)

We would like to install a custom search engine using Firefox policies. We have the latest version of Firefox installed. We have the latest admx files installed on our Domain Controllers. In the Policy, I go into the User -> Administrative Templates -> Mozilla -> Search and setup a search engine using Search Engine One. I then go into Default Search Engine and configure our custom search to be default. What we find is that the custom search engine never installs, so the custom search engine is not set at the default. If I manually add the custom search engine using the Search Engine Helper Add-on, I can verify that the custom search settings do indeed work. With that said, does anyone have thoughts on how to troubleshoot this issue? First, need to figure out why the custom engine isn't installing at all. Thanks.

Asked by peterc5 1 year ago

Answered by peterc5 1 year ago

  • Solved
  • Archived

Firefox ESR deployment with MDT Error: 1618

We use Microsoft MDT for computer deployment. We have been installing the Standard version of Firefox for a long time with no problem. Recently we started using AD GPO Te… (read more)

We use Microsoft MDT for computer deployment. We have been installing the Standard version of Firefox for a long time with no problem. Recently we started using AD GPO Templates to configure firefox. To be able to configure certain settings you need to be running the ESR version. I downloaded the more recent ESR version: 102.12.0esr.msi file.

When deploying machine MDT to install Mozilla firefox I keep getting this error: Application Mozilla Firefox ESR returned an unexpected return code: 1618

This is the only application having issues and this issue only came up since I change the installation file to the ESR version.

This is the install command being used in MDT: msiexec /i "Firefoxesr.msi" /qn /norestart

I am posting here and not with MDT support, as this only started happening when I changed the installation file to the ESR version. Has anybody else had a problem deploying ESR version through MDT? Any help on how to fix?

Asked by Joshua_Calais 1 year ago

Answered by Joshua_Calais 1 year ago

  • Solved
  • Archived

how to disable common users to modify the settings of "No proxy for" in "Connection Settings"

I am an admin of some servers, i modify the proxy settings of firefox in a GPO, and it works, but now ont thing is that users can modify the settings of "No proxy for" in… (read more)

I am an admin of some servers, i modify the proxy settings of firefox in a GPO, and it works, but now ont thing is that users can modify the settings of "No proxy for" in Connection Settings, then add the urls, then users can access to any web site which they want to, is there a method to disable this? thanks.

Asked by fas910 1 year ago

Answered by Mike Kaply 1 year ago

  • Solved
  • Archived

Configure Firefox to always show menu bar, for all users

We are looking to mass deploy Firefox x64 for Windows to all staff in our organization, using SCCM. I know you can set a default home page in mozilla.cfg for all users, i… (read more)

We are looking to mass deploy Firefox x64 for Windows to all staff in our organization, using SCCM. I know you can set a default home page in mozilla.cfg for all users, including future users who don't yet have a profile on the computer Firefox is installed on. Is there a similar option so I can configure Firefox to always show the menu bar for all users? Preferably, another line I can add to mozilla.cfg so that I can easily copy that to all our machines? Thanks.

Asked by rick.sparrow 1 year ago

Answered by cor-el 1 year ago

  • Solved
  • Archived

GPO Settings for AutoFill Address and Credit Cards

We downloaded the GPO Templates for AD and looking to customize Firefox. We would like to disable Forms and Autofill: Autofill addresses Autofill credit cards Also wou… (read more)

We downloaded the GPO Templates for AD and looking to customize Firefox.

We would like to disable Forms and Autofill: Autofill addresses Autofill credit cards

Also would like to lock down so they can't reenable if possible.

We would like to do this all through GPOs if possible. I found these in the about:config: extensions.formautofill.addresses.enabled extensions.formautofill.creditCards.enabled

But again want to do through the GPO. Is this possible?

Side note while working on GPOs, I set Exceptions for the popup blocker and they are not showing up in the browser. I also filled out to remove Search Engines but they all still appear in the browsers. These two GPO settings don't appear to be working.

Asked by Joshua_Calais 1 year ago

Answered by Mike Kaply 1 year ago

  • Solved
  • Archived

Firefox Policies

We try to deploy Extension Management Settings via GPO. Goal is to allow only whitelisted extensions, but don't block themes, dictionaries and locales. Below find the J… (read more)

We try to deploy Extension Management Settings via GPO.

Goal is to allow only whitelisted extensions, but don't block themes, dictionaries and locales.

Below find the JSON-settings deployed to the client, which should allow all themes and whitelisted extensions. Unfortunately this blocks everything except whitelisted IDs. See example screenshot with error-message, when trying to install a theme. We don't want to whitelist locales or themes, they should be still allowed for installation.

What I'm doing wrong? - Thanks for your feedback.

##############
{
"*": {
"installation_mode": "blocked",
"allowed_types": ["theme"]
},
"uBlock0@raymondhill.net": {
"installation_mode": "allowed"
},
"jid1-ZSMfwe4lCAw9oQ@jetpack": {
"installation_mode": "allowed"
}
}

Asked by Mario.Daub 1 year ago

Answered by Mike Kaply 1 year ago

  • Solved
  • Archived

Group Policy Templates / Preferences (Deprecated)

I am looking for information regarding the support life for settings that are defined in the Preferences (Deprecated) section of the ADMX templates provided in GitHub. Th… (read more)

I am looking for information regarding the support life for settings that are defined in the Preferences (Deprecated) section of the ADMX templates provided in GitHub. There doesn't appear to be a definitive answer as to when these preferences are no longer applicable to a version of Firefox. The term "Deprecated" certainly applies they're on their way to extinction. But only a small handful of preferences have been ported over to non-deprecated template settings (like Auto Update). Is there an expected version of Firefox where all these preferences are meaningless? Or will they be supported indefinitely? "Industry recommendations' from 3rd party security vendors are bloating my policies in the domain space and I can't definitively say they are 'no longer supported as of version xyz' for all these Firefox Preference settings, which happen to be about 80% of the security parameters defined by STIG and/or CIS Workbench.

Asked by rott3nhippi3 1 year ago

Answered by TyDraniu 1 year ago