All Products Community Forum

I've checked a couple of the "similar topics" before posting here. I'm not sure if I am having the same problem or something else.

Back Story: I have a "few" windows and tabs open in FireFox. I would finish what I was doing, shut down and then the next time I booted up and loaded FireFox, all sessions would be restored and all log ins honoured (kept). That is: I was still logged in.

(Moving to now) Yesterday I powered up and ALL sites were logged out. About 20 log ins were needed. Hmmmmm... gmail, and the rest.

"Ok... something happened. No problems, things should be ok from now. I've logged in, so all is sweet."

Today I power up: All logs ins lost. Had to go through it all again.

Gmail is throwing security alerts at me hand over fist. Yeah, that is good in some ways. I get that part. But I've logged in.

Seems - my thoughts - that the cookies aren't being saved. But why? I haven't touched them or their settings.

Yes, I did do a clean out of older cookies. But left the gmail ones, and other sites I know I use. I have `adblocker ultimate` installed.

Now I am logged in, if I open the `cookies` and look I should see them there for the sites to which I am logged in - yes?

To be clear: When I am done, I do NOT `exit` FireFox. All windows, tabs, sessions are left. I just shut down the machine. Then next time I load FireFox and they are re-loaded and log ins are maintained.

In very simple terms, plz, my mail comes thru AOL to TBird. Changing Outgoing/Incoming settings for TLS 1.2, where do I make the changes, in AOL or TBird, or both? Currently the settings were picked up by TBird when I installed it in 2020. On TBird they all include the name AOL. (I get mixed up with words like 3rd party and email client) Thank you

Hello, I have 5 email addresses - four I use regularly: TalkTalk1 (Default) and 2, Free-online and Googlemail (haven't upgraded to gmail), and one I haven't for ages (YahooMail). I cannot send emails from any, except from my TalkTalk(TT) default one. I have updated the TalkTalk new Outgoing server settings to the best of my ability, for TalkTalk2 (TT2), Free-online (FOL) and Googlemail (GM) - I can send screenshots for each if necessary: - Server names: all smtp.domain name.net, except FOL: relay.free-online.net (verified on several google searches) - Outgoing port: all changed to 587 - Connection security: all STARTTTLS - Authentication method: all 'Normal password' (I am assuming these would be the same as the ones in the saved login passwords section of Privacy & Security, except for GM which has Incoming server authentication OAuth2 but a normal password in the saved login Passwords) - User name: my email addresses, except for FOL: my name Details: Email providers: TalkTalk, Free-online (Plusnet), Googlemail ISP: Talktalk.net Operating system: MacOS Catalina 10.15.7 Thunderbird version: 102.8.0 Many thanks for your help, it is now the 8th day I spend on this (I am a senior not very techy person).

This is my first post. But I have been reading and benefiting from all the expertise I have found here for many years! Thanks to all!

Trying to plan ahead for the Gmail OAUTH2 change, I upgraded to Tbird 91.9.0.

My Account Settings all transferred to the new version. I do have multi Gmail accounts, as well as other email accounts, but from other posts here, this should matter.

While I am a long term Tbird user, I am a newbie with OAUTH2. I can't seem to connect. So I am writing here for help!

My setup: - Dell notebook running W10 - internet connection strong - am using a Netgear Nighthawk Hotspot Router, which works great with

    everything else, so I really doubt that is an issue

- testing without a firewall; running McAfee - resetting Tbird account back to "Normal Password", then Gmail connects

Incoming Server set to IMAP: imap.gmail.com:993 w SSL/TLS and OAuth2 Outgoing: smtp.gmail.com:465 w SSL/TLS and OAuth2

I have been consistently testing with the same gmail account: - YES, I know my password; it works with both the Gmail web interface,

   or after going back to "Normal Password" instead of OAUTH2

- allow any Alert emails via Gmail Web Interface, repeatedly. - Ran Captcha ... many times! In case someone else reading here needs this, it is here: https://accounts.google.com/b/0/DisplayUnlockCaptcha and you must be logged into the Gmail Web Interface when running this. I have learned to take a pause after running this, for it do its thing.

If Toad-Hall is reading this, I found your list of steps here very helpful: https://support.mozilla.org/en-US/questions/1375558 Worth repeating for others who are struggling, like me.

As recommended here: https://support.mozilla.org/en-US/questions/1373706 Cookies: all cleared Remembered Passwords: all cleared

Also looked at this: https://support.mozilla.org/en-US/questions/1375702 Originally, my cookies WERE blocked. I did need to change my Web Content as recommended in this post:

   Selected: Remember web sites and links I've visited
   Selected: Accept cookies from sites
   Accept third-party cookies: Always
   Keep until : they expire
   Not selected: 'Send web sites 'Do not track'..... 

Also: In Privacy and Security -> Web content -> Exceptions, added: https://accounts.google.com set to 'Allow' and Saved Changes. Then exit Tbird, took a short pause, started Tbird again, per the advice to properly update the files.

Should I be doing BOTH of these? This post shows options: https://support.mozilla.org/en-US/kb/automatic-conversion-google-mail-accounts-oauth20 So if I Select to accept cookies, should I also set the Exception??? I have tested various combinations of these settings, but not seeing a cookie.

In Tbird, when testing to connect, I see:

"Sign in with your Google Account" Enter my account password (I see an error msg here when I typo the password, no error when entered correctly) Also, have checked "Stay Signed In" while trying to Authorize, as recommended. then click Allow on the second screen.

After a few seconds, keep seeing popup in lower right corner of screen: "Authentication failure while connecting to server imap.gmail.com" Sometimes, this msg does not popup, which seems odd to me, but it still fails: Cookies: still empty Password: still empty

I keep updating and reading and updating the setups and testing again, but no cookies for me!

I admit I have gotten off track, testing and reading posts:

Thought my problem might involve Certificates for a while, but now do not think OAUTH2 is using Certificates. Right?

Thought for a bit it might be Javascript disabled, but I am NOT seeing the popup window that shows this error, from this post: https://support.mozilla.org/en-US/questions/1373379 refers to: https://support.mozilla.org/en-US/questions/1286410 Did find my way to Config editor: https://support.mozilla.org/en-US/questions/1349136 Followed this advice: "Click the 3-bar menu icon, Preferences, and find Config. editor at the bottom of the General section. Or, type editor in the search box at the top of Preferences." Then searched for "Javascript" and found most of settings were true, like javascript.enabled is "true". Should everything that a search for javascript finds be set to true? Since I do not see the error msg, I believe this is not my problem.

Stans posted another helpful summary here: https://support.mozilla.org/en-US/questions/1375538 "After you've changed your accounts to OAuth2, delete all records of your Google Account passwords from Thunderbird's password vault (Saved Passwords). With OAuth2, your passwords are not stored by Tbird. Instead, an OAuth2 token (a long string of meaningless characters) is stored in the password field. That's what you should see after completing the OAuth2 process for each of your accounts. You have to do it twice, once for incoming and once for outgoing server. Also, you must allow cookies in Thunderbird's Preferences, otherwise it won't work."

If I am following this correctly, after testing to try and authenticate, I should see a Cookie and a Saved Password being created but they are not.

Think this is my problem!

In Gmail web interface, I am not sure of some settings:

In Manage Your Google Account -> Security:

1. Should Sign-in 2-step verification be on/off? (its off) 2. Third Party apps w access shows Tbird (think this is new, don't recall it before) 3. Allow Less Secure App: turn off (was On for normal pswd; either way fails w OAUTH2) (think I have tested all combinations of the above, with no success) I welcome suggestions on how I should set these to connect with OAUTH2.

I feel like I am getting close here, but I am stuck. Is there anything else, maybe something I have not heard about, like Captcha, that I should try?

Have I missed a setting somewhere? Suggestions???

Meadowlark13

I am using Windows 11 and Thunderbird. A few days ago I was asked to type my password every time I opened the mail program. But the password is not accepted now. I have used the mail program for years without this problem. How do I fix it?

Starting May 12th Godaddy e-mail accounts no longer support pop/imap email servers. They want you to switch over to an exchange server type. Can I configure Thunderbird to accomodate this change (I've been with Thunderbird for many years), or do I need to change to Outlook 365? Help, Thunderbird no longer downloads my e-mail from Outlook.

A while ago my long-time hotmail account stopped working on two computer with windows 10 and one with windows 11. Last night, I looked up an article that said I have to use Oauth2 instead of normal pw. I made that change on the windows 11 machine and a popup occurred that wanted the number from the google authenticator on my phone. I gave it that and it checks mail now just fine.

This morning I went to one of the Windows 10 machines and did exactly the same. I tried some different server names online and tried some, but after a while I started getting a little window that asked my email address and pw. I put my hotmail address in and got this message:

Microsoft Accounts or personal email addresses don’t work here. Make sure you enter your work or school account (e.g. user@contoso.com). If you want to reset a Microsoft Account password, click here.

Now this is the very same hotmail email that worked on windows 11 with the same server settings last night. It still works.

Now, on the windows 10 machine with those same settings, I get the blank extra window. The extra window appears, does not populate, and disappeared.

It is: https://login.microsoftonline.com/common/oauth2/v2.0/authorize?response_type=code&client_id=9e5f94bc-e8a4-4e73-b8be-63364c29d753&redirect_uri=https%3A%2F%2Flocalhost&scope=https%3A%2F%2Foutlook.office365.com%2FIMAP.AccessAsUser.All+https%3A%2F%2Foutlook.office365.com%2FPOP.AccessAsUser.All+https%3A%2F%2Foutlook.office365.com%2FSMTP.Send+offline_access&login_hint=redacted@hotmail.com

I had no opportunity to do what worked on the windows 11 machine just last night. I cannot check mail on hotmail on this windows 10 pc. I took all the updates available to Thunderbird and firefox. TB is 115.11.1

I'm stopped. Why would it work on one pc and not another? Oauth2 on the windows 11 asked for authenticator. On the windows 10 it never asks.

Is there a preference in about:config to fake or simply block websites from reading the font-list of my operatingsystem? I think it is pretty ridiculous anyways that websites can access this information since it has nothing todo with the webbrowser visiting the site but going beyond to spy on information that i consider private.

Same question goes for audio-readout, is there a pref to fake or block?

Our app sends an email advising the specified individual to note a series of images presented in three rows of nine. The rows display in Gmail via Windows->Chrome, via Android, and iOS with a Yahoo account.

But not in Thunderbird. This is a serious issue as I believe I have followed all the correct settings including in-line display, and yet for some reason, Thunderbird does not display the images.

Any suggestions are appreciated as I am baffled since Thunderbird has been my go-to email client for years.

Network Solutions upgraded their email, and I multiply-checked all my settings in Thunderbird (102.3.2) and can retrieve mail but the outgoing mail hangs and time out with an error. I just discovered it's not my settings, but there's no password listed for the default outgoing SMTP server (my own domain). (I have 2 email accounts, and listed in the "Saved Passwords" are 2 passwords for incoming IMAP plus one the other account outgoing SMTP, 3 total.)

Is there any way to add a password without deleting the default server and then adding it back in, or some other solution?

Thanks

on GitHub the commands are all based on Java https://github.com/mozilla/policy-templates#preferences

Is there a list of all available registry settings? Or where do these Java options come from, where can I read them out?

Fire Fox has taken to auto filling my password on my brokerage account. This leaves the account available to anyone that can turn my computer on. I do not have a password saved for the brokerage account and have the company listed to be excluded. This just happened in the last few weeks.

Hello,

I'm trying to access the following URL: https://archive.vn/QzWMe

When I do that, I get a page entitled: Secure Connection Failed. The page looks like the image I uploaded.

I've been all over the internet looking for fixes, but none are working for me. Incidentally, when I try to connect to this website (it is an archive of a Wall Street Journal page) using Edge, there is no problem; the page displays right away.

Is there a way to use Firefox to read this page?

Thanks for any help.

My wife & I have the same PCs running Windows 10 & Thunderbird 115.11.0 (32bit).

We have a hosted web-site that also supports email, and we each have an email account (eg neddy@goon.com.au & minnie@goon.com.au). I've checked that both our POP server configurations are identical but despite that about once a week minnie@goon.com.au receives a warning to add security exception but neddy doesn't. This started happening two weeks ago after a years error free running.

The host has checked that goon.com.au has a valid SSL certificate, so what could be causing the discrepancy and how do I set about fixing it please?

I just lost several hundred tabs on Firefox mobile right after it updated itself. The most recent tabs show only ten of those tabs, which were all opened and closed today and aren't part of what I need to restore.

How do I get my tabs back? I've seen no 'restore previous session' option. My laptop only shows the few I have open now. What do I do to restore them?

I have sent several emails and get no reply, how am I suposed to fix check or see my saved passwords if they all look like this...3b4a3f36-7056-4eee-bcb3-2b0838fa07e1

TB 102.5.0 (64-bit) on Win10 I'm getting repeated notices that my e-mail accounts with Network Solutions don't have a proper "certificate" when I try to send an email. I get a popup window stating so, and asking me to "permanently" choose the exception. It doesn't matter how many times I tell the fool thing to accept the exception "permanently". I still keep getting the notice every few times. Since the glitch is not consistent, I don't have an image of one to put here. Not only that, I have to send the email twice after doing so. TB refuses to send the email the first time after choosing the exception, but allows it the second. I don't know anything about "certificates" and am sick of getting popup notices about them. I doubt that the problem is with Network Solutions email accounts. This reminds me of years ago, when I tried to upgrade to WinXP. It kept interrupting my work to give me popup security notices that I didn't understand and couldn't do anything about. If I remember correctly, I took it back to Sam's Club and replaced it with Win2000. Problem solved. Never mind that XP was supposed to be better. If it ain't broke, don't fix it.