• Solved
  • Archived

Local Folders issue SOLVED by disabling Hardware Acceleration

After installing version 78.4.0 (and continuing into 78.4.1), I have an issue with many of the folders in my Local Folders account. When I click on an affected Local Fold… (read more)

After installing version 78.4.0 (and continuing into 78.4.1), I have an issue with many of the folders in my Local Folders account. When I click on an affected Local Folder folder, it is not highlighted and no messages appear. Messages will appear if I scroll the mouse pointer over the message pane. I can then also read the messages, etc. If I move to another Local Folders folder, messages may appear or they may not (always the same folders) until I move the mouse pointer as described above. Note that the folder name is also not highlighted after clicking it. Sometimes the entire folder/account column on the left side of the screen is blank until I scroll the mouse pointer over that column. Very annoying! Any ideas? FYI - I have tried "repairing" the folders in question. That does cause the messages to appear but as soon as the folder loses focus, the problem reappears - meaning the messages disappear and do not reappear until I either scroll the mouse pointer over the message pane or re-repair the folder.

Ken in Kansas

Asked by lamxguard-general 3 years ago

Answered by sfhowes 3 years ago

  • Solved
  • Archived

other bookmarks folder

Hello, I would like to know how to remove 'other bookmarks' folder from the right side of bookmark toolbar that showed up suddenly on my browser, it's right after the arr… (read more)

Hello, I would like to know how to remove 'other bookmarks' folder from the right side of bookmark toolbar that showed up suddenly on my browser, it's right after the arrows to show more bookmarks. I can't seem to find a way to delete this.

Asked by nicaya 3 years ago

Answered by cor-el 3 years ago

  • Solved
  • Archived

Edit "always open" settings for containers

How can I get a list of all the sites that are set to "always open" in a specific container? For example, I want to see a list of all the sites set to always open in the … (read more)

How can I get a list of all the sites that are set to "always open" in a specific container? For example, I want to see a list of all the sites set to always open in the Work container. I would also like to edit the list without needing to manually visit each site.

Asked by Chris Shaffer 3 years ago

Answered by Adivardhan 3 years ago

  • Solved
  • Archived

Disable overly insisting updates

When Firefox asks if I want to download an update and I agree, soon after that but not right away it stops working - on every new page it says "We need to restart to fini… (read more)

When Firefox asks if I want to download an update and I agree, soon after that but not right away it stops working - on every new page it says "We need to restart to finish updating" <- This last bit is VERY annoying. Is there a way to keep FF working in such situation? I usually have 3 FF profiles running, about 10-20 tabs each and when it suddenly does this - I can restart them all but when it is suitable for me.

The only solution I can see so far is disabling updates via group policies (which is not well documented, where do i put this policies.json on Fedora? need to google that).

Any other ways to keep updates and FF running until I decide when to restart? Thanks.

Asked by aikbox 3 years ago

Answered by Scribe 3 years ago

  • Solved

cant get a gmail account to work

I erased my password on an gmail account in thunderbird, I changed it in gmail. when I start thunderbird it asks for the email account instead of just the new password. I… (read more)

I erased my password on an gmail account in thunderbird, I changed it in gmail. when I start thunderbird it asks for the email account instead of just the new password. I fill in the email account and it sends error 400 back to me.

Asked by spam_file 4 months ago

Answered by sfhowes 4 months ago

  • Solved
  • Archived

missing print "page setup" in Mozilla v85

With the new v85 of Firefox... for Microsoft Print to PDF... the defaults for print headers & footers has changed and is no longer available to edit or even view. It… (read more)

With the new v85 of Firefox... for Microsoft Print to PDF...

the defaults for print headers & footers has changed and is no longer available to edit or even view. It seems as though my settings remain in place for other printing options like my physical printer but even there the options are not editable or viewable.

There used to be a "page setup" option but I have not be able to find this anywhere anymore.

I'm assuming that it has to do with the bug fix for pdf printing but doesn't seem that it should be an intended outcome of the fix.

Any work arounds anyone knows about or has found?

Asked by Cobalt TiNor 3 years ago

Answered by jscher2000 - Support Volunteer 3 years ago

  • Solved
  • Archived

userChrome.css not working

I'm trying to take off this "Extension (Tabliss)" tag on my url. I have followed the instructions down below from another Firefox support forum: https://discourse.mozill… (read more)

I'm trying to take off this "Extension (Tabliss)" tag on my url. I have followed the instructions down below from another Firefox support forum: https://discourse.mozilla.org/t/make-addressbar-text-extension-name-of-the-extension-shorter-or-hide/28026/3

The instructions I followed are listed below:

"Users can apply custom style rules to modify Firefox’s toolbar area by creating a userChrome.css file. This takes about 10 minutes so when you have time to take it slowly and carefully:

(1) Set up your chrome folder and userChrome.css file following the five six steps in this article:

https://www.userchrome.org/how-create-userchrome-css.html 45

I have a boring video there if you like demonstrations.

(2) This is the code to paste into the file. You can edit the file using Notepad or a better editor. Make sure to keep it in a plain text format with a .css file extension (not .css.txt).

See improved rule down in: Make addressbar text "Extension (Name Of The Extension)" shorter or hide

/*
   Hide Extension Name in the identity area unless
   hovered for half a second (updated for Fx80)
*/
#identity-box.extensionPage #identity-icon-labels,
#identity-box.extensionPage #identity-icon-label {
  visibility: collapse !important;
  transition: visibility 250ms ease-in-out;
}
#identity-box.extensionPage:hover #identity-icon-labels,
#identity-box.extensionPage:hover #identity-icon-label {
  visibility: visible !important;
  transition: visibility 250ms ease-in-out 500ms;
}

(3) Firefox should read the file at its next startup and apply it to every extension page you load."

Edit: So, yeah, I need help getting this tag off. I'm new to Firefox so it could be something obvious I'm missing. I have also tried CTRL+SHIFT+R to reload the page for changes and also closed and reopened my Firefox entirely.

Thanks in advance.

Asked by MaxwellQ 3 years ago

Answered by Wesley Branton 3 years ago

  • Solved
  • Archived

Where did Page Setup / Margins & Header/Footer go?

I'm using Firefox 85.0.2 . . . I was doing this (below), to customize my header and footer, but in this version of FF, I no longer see this in Options - only in: about:c… (read more)

I'm using Firefox 85.0.2 . . . I was doing this (below), to customize my header and footer, but in this version of FF, I no longer see this in Options - only in: about:config . . . keyword "footer" . . . there, I would have to change it for 5 different ways of printing (to printers or to PDF)

I need to get rid of printing the URL in the footer - many times, it's too long, and I don't need it.

Where did the Page Setup option go?

I see in the current Print Options, you have to go to - More Settings / Margin / Custom - to see those. Why would they put this so many levels down?

It used to be: File / Page Setup / Margins & Header/Footer . . . "Customize" Headers & Footers:

Option 1 (left) . . . there are two leading spaces:

 > > &T
 > > &U . . . &D . . . &PT

Option 2 (left) . . . get rid of the ">"s, and just have the two leading spaces:

 &T
 &U . . . &D . . . &PT

Asked by sludge7051-x 3 years ago

Answered by jscher2000 - Support Volunteer 3 years ago

  • Solved
  • Archived

"Compact Folders" message is confusing

I'm using Thunderbird 87.0b3 (32 bit) on a 64 bit PC I recently deleted an email and saw the message: “Compact Folders. The messages you have deleted can be purged f… (read more)

I'm using Thunderbird 87.0b3 (32 bit) on a 64 bit PC I recently deleted an email and saw the message:

“Compact Folders.     The messages you have deleted can be purged from disk. This operation will save you 202MB of disk space. Select the option below to let Thunderbird do this automatically without asking you.

[] Remove message deletions automatically and do not ask me. Proceed Cancel”

This message confused me. It was entitled “Compact Folders”, but then stated it would PURGE messages from my disc. Without ticking [] Remove message deletions automatically, I selected “Proceed”. I was very relieved to see that messages were compacted but none of my messages in “Trash” had been deleted.

I strongly suggest that this message should be rewritten to say: Compact folders. If you allow Thunderbird to compact your folders this operation will save xxx MB of disk space. Select the option below to let Thunderbird do this automatically without asking you. [] Compact folders automatically and do not ask me.

Asked by Grrrrhwll 3 years ago

Answered by christ1 3 years ago

  • Solved
  • Archived

moving tabs back to below menu bar

Firefox updated and now my tabs are above the address bar, I hate it. I have went through all the information I could and created a new chrome folder, downloaded the css … (read more)

Firefox updated and now my tabs are above the address bar, I hate it. I have went through all the information I could and created a new chrome folder, downloaded the css and changed user preferences but it sets the tabs to the bottom of the screen not just below the address bar. I think I need a different set of code for the css but cant find a copy. Does anyone know what to do?

Asked by sharkeyandgeorge 2 years ago

Answered by sharkeyandgeorge 2 years ago

  • Solved
  • Archived

What content is required in userChrome.css to move the tabs bar under all other bars?

Every solution which I have found for Firefox 89 "Proton" so far which moves the Tabs Bar below the Navigation Bar (AKA "address bar"), with the Menu Bar above it, does N… (read more)

Every solution which I have found for Firefox 89 "Proton" so far which moves the Tabs Bar below the Navigation Bar (AKA "address bar"), with the Menu Bar above it, does NOT move the Tabs Bar below the Bookmarks Bar. The Bookmarks Bar appears to be overwritten and blank, and occupies space below the Menu Bar, Navigation Bar, and Tabs Bar. This empty space separates the three bars which are implemented and the content of the currently-selected tab below it.

Currently, my userChrome.css file is a copy posted by Cor-el (?):


@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");

/* TABS: below nav-bar - fixed for 108+,113+ */

/* ROOT -variables */
*|*:root {
  --tab-toolbar-navbar-overlap: 0px !important;
  
  --tab-min-height: 25px !important; /*override density*/
  --tab-min-width:  80px !important; /*override default*/
}

/* TABS: below nav-bar - no longer needed in 113+ *//*
#navigator-toolbox toolbar:not(#nav-bar):not(#toolbar-menubar) {
  -moz-box-ordinal-group: 10 !important;
  order: 10 !important;
}
#TabsToolbar {
  -moz-box-ordinal-group: 1000 !important;
  order: 1000 !important;
}
*/

/* TABS: position */
#TabsToolbar {
  display: block !important;
  position: absolute !important;
  bottom: 0 !important;
  width: 100vw !important;
}

/* for 107 and lower - disable this rule in 108 and newer *//*
#tabbrowser-tabs {
  width: 100vw !important;
} */

/* navigator-toolbox: PADDING */
*|*:root:not([chromehidden*="toolbar"]) #navigator-toolbox {
  padding-bottom: calc(var(--tab-min-height) + 1px) !important; /*ADJUST*/
  position: relative !important;
}

/* TABS: HEIGHT */
#tabbrowser-tabs,
#tabbrowser-arrowscrollbox,
#tabbrowser-tabs .tabbrowser-tab {
  min-height: var(--tab-min-height) !important;
  max-height: var(--tab-min-height) !important;
}

#tabbrowser-tabs,
.tab-stack,
.tab-content {
  height: var(--tab-min-height) !important;
}

/* TABS: APPEARANCE */
#TabsToolbar {
  height: var(--tab-min-height) !important;
  margin-bottom: 1px !important;
  box-shadow: ThreeDShadow 0 -1px inset, -moz-dialog 0 1px !important; /*OPTIONAL*/
  background-color: var(--toolbar-bgcolor) !important;
  color: var(--toolbar-color) !important;
}

/* indicators - hide  */
.private-browsing-indicator {display: none !important;}
.accessibility-indicator    {display: none !important;}

/* window controls in full screen - hide*/
#TabsToolbar #window-controls {display: none !important;}

/* caption buttons on tab bar - hide */
*|*:root[tabsintitlebar]:not([inFullscreen="true"])
 #toolbar-menubar[autohide="true"] ~ #TabsToolbar
 .titlebar-buttonbox-container {display: none !important;}
________________________________________________________________________________________________

Evidently, the text editor for this website does several things to the above original text that, frankly, seem unnecessary and undesirable. The .CSS file is just an unformatted text file, so what is the problem with simply copying its contents and pasting it in to the body of this post?

Which is also to say that I do NOT have a clue as to what any line in the file is meant to do, what effect it has, why it is even in the file at all, or why it is written in the way that it is. So DO NOT tell me that I "CAN" create a Cascading Style Sheet on my own when I cannot even modify one that has been provided.

On the face of it, something is missing from the above CSS text. What change needs to be made to the above content so that the Bookmark Bar will appear between the Navigation Bar and the Tabs Bar??

Thank-you very much for your time and attention to this request for assistance.

Asked by Blacklisted 2 years ago

Answered by DB-1 2 years ago

  • Solved
  • Archived

E-Mail content displays as plain text instead of HTML-text

Dear community, in the past, I have noticed that a few e-mails - but not all - are displayed incorrectly as plain text instead of the usual HTML-text. This means that th… (read more)

Dear community,

in the past, I have noticed that a few e-mails - but not all - are displayed incorrectly as plain text instead of the usual HTML-text. This means that there is no formatting involved, e.g. the font art is not correct. As it seems, the issue occurs when the standard formatting options of e-mails are used by the senders. So if nothing is changed like the font size or colour. If I look at the e-mail on different e-mail programs, everything is alright. I have already ensured that the option View > Message Body As > Original HTML is enabled.

Thanks in advance for your advice. batengo

Asked by batengo 2 years ago

Answered by Matt 2 years ago

  • Solved
  • Archived

How to Turn Off Data Collection in Mozilla VPN

Hey there, When first opening the MozillaVPN app (in Linux) it gave me to option to consent or decline to data collection of technical information. I consented but would… (read more)

Hey there,

When first opening the MozillaVPN app (in Linux) it gave me to option to consent or decline to data collection of technical information. I consented but would like to decline/turn it off. I know how to do this for the Firefox browser, through the settings and privacy tab; however, I'm having trouble finding a way to turn off / opt-out for MozillaVPN.

Thanks!

(I'm asking this question in this Firefox forum because I was unable to make a new post in the MozillaVPN forum.)

Asked by crabbybabbler 2 years ago

Answered by edubon 2 years ago

  • Solved
  • Locked
  • Archived

How to keep Mozilla VPN always on with Android OS?

Mozila VPN on Android sometimes appear to automatically turn itself off. The explanation could be in your settings on Android: Go to settings, - select Apps, - - cho… (read more)

Mozila VPN on Android sometimes appear to automatically turn itself off.

The explanation could be in your settings on Android: Go to settings, - select Apps, - - choose Mozilla VPN in the list, - - - go to Battery and select background Use,

go back to Mozilla VPN in the list, - - - go to Mobile Data, - - - - turn On "Allow Background Data Usage" - - - - turn On "Allow App while Data saver is On"

now your VPN shouldn't turn off any longer.

When restarting your phone the explanation why the Mozilla VPN is OFF is that to keep your security, the app requires re-authenticating with their servers (new encryption key).

Asked by 139744cwb$×^4ho74cqo#€7bxq3b 2 years ago

Answered by 139744cwb$×^4ho74cqo#€7bxq3b 2 years ago

  • Solved
  • Archived

Import Extensions from Chrome

Anyone know if there is a way to import Google Chrome extensions into Firefox. I am moving over and want to make it easy. When I search all I get is bookmarks which I kno… (read more)

Anyone know if there is a way to import Google Chrome extensions into Firefox. I am moving over and want to make it easy. When I search all I get is bookmarks which I know how to do.

TIA!

Ron

Asked by Ron 2 years ago

Answered by TyDraniu 2 years ago