Thunderbird-Hilfeforum

We have been using Thunderbird with a Cox email account. Cox has just transferred all its customers to Yahoo. I want to use Thunderbird with Yahoo. How do I set that up?

I've been using Thunderbird for years and have never had this problem. Since the upgrade today, after I run Thunderbird once and close it I can no longer start it up again. I have to reboot or use Task Manager to kill it in order to run it. This is on Windows 11. Please help - not an acceptable workaround for long. Optionally, how do I downgrade to previous version? I should know better than allow automatic upgrades.

Adding a couple images below, when it has started successfully it shows as one of the Apps in Task Manager. When I close it, Thunderbird drops into the Background Processes but doesn't end. I have to kill it here in order to start it again.

Start new Windows session. Start Thunderbird and works OK. Shut Thunderbird down and try to re-start during same Windows session and it will not launch. Reboot Windows and try to start Thunderbird and works OK. Alternatively, going into Task Manager there will be a number of Thunderbird processes running. If I manually end them all (while Thunderbird is NOT active) then I can restart as normal too. This all began with 124.0 Beta 1. Never had the issue prior.

Also, Thunderbird crashes if restarting within the app. By this I mean clicking the X it appears to close (excepting those persistent processes running) but "Restart Thunderbird" such as to launch Troubleshooting mode or from the "Restart to update Thunderbird" config crashes the app with 100% consistency.

Cox.net is transitioning from in-house e-mail to e-mail handled by Yahoo.com. Our cox.net addresses are supposed to (and apparently have) transitioned so that they still work, but are processed through pop.mail.yahoo.com.

It is my turn to be transitioned and I have been successful in doing so to the extent that I can send and receive using my address(es) ...@cox.net through Yahoo web mail and on my Samsung phone. I have not, however, been successful in either sending or receiving mail using Thunderbird on my desktop.

I have been successfully using Thunderbird with POP settings for years with four different cox.net addresses. [I'm currently just trying to get two of them working -- unsuccessfully.]

I am using Windows 10 on a Dell desktop. I am using Thunderbird 115.9.0 (32 bit). I have reset the POP and SMTP settings as directed by Yahoo. One of the errors I receive is: "Error with Account .... Sending of password for ...@cox.net did not succeed. Mail server pop.mail.yahoo.com responded (SYS/TEMP) Server Error - Please try again later." It then asks me to retry or enter a new password. I have checked the passwords saved by Thunderbird and they are correct.

I suspect, that with all the Cox accounts being newly routed through Yahoo servers that I am not the only Thunderbird user experiencing this problem. Does anyone have any suggestions? Is it likely to help if I uninstall and reinstall Thunderbird? Would I loose all my mail, etc. if I did that? [I did the delete and add account in my phone and that was successful, but I wasn't concerned about losing mail there as it is all on my desktop.]

Thanks in advance. billb1111

Hi, I installed the latest Thunderbird on OS X Monterey for a friend and am using an Imap email account. Sending and receiving emails is working correctly. The problem is viewing what is in the inbox, it shows a certain number in the inbox but not all of those messages are showing up, some are missing. I've played around with the settings but I didn't see anythng that could help me out. On my own computer this works correctly, when I see a number in the inbox, it does show all of those email messages. Not sure what is going on, maybe it's simple like a setting not done correctly, or I missed something. Anyway, any help would be appreciated.

Thanks

I can't receive emails at any address from those in Thunderbird. I have several addresses, some in Gmail but not all. And in each of them I get this message: The STAT command did not succeed. Error getting message number and sizes. Mail server pop.gmail.com responded: [AUTH] Invalid credentials. I am using version 115.5.2

I upgraded to Thunderbird 115.10.0 (x64) earlier today and now the program is no longer closing completely (I've tried using the X at the top right of the window, and I've also tried File menu -> Exit). I first discovered this when I was using CCleaner to clean my temporary items and it asked me if I wanted to close Thunderbird after I had already closed it. I then checked my running processes and there are three Thunderbird processes that remain after the program has supposedy closed (Task Manager screenshot attached).

Any help with this seemingly new bug is greatly appreciated!

Much thanks, -Snipe

When opening an email with previous email responses on it a seperate tab automatically opens for each previous email on that email. Before the update a few months ago only one tab would open when opening a new message and I want that system to continue. I cannot see how to do that.

I also prefer the previous option of unread emails in bold (showing on Inbox) rather than now underlined. Can I change that too?

Thank you

I am getting the Mozilla Thunderbird Email wants to access your Google Account all the time while using TBM, I have removed the gmail account and the pop up does not show, so I know it is for the email account just removed. I re-add the email address and enter the email address and password and let it find the config itself. Click Done, and get the Mozilla Thunderbird Email wants to access your Google Account again, then click Allow and get the Authentication failure while connecting to server imap.gmail.com. message in the bottom left of my desktop. How can i get gmail to work again please.

Windows 10 22H2, Thunderbird 115.5

Thunderbird periodically loses my saved passwords (11 accounts) necessitating the re-entry of said passwords. This has been happening for about six to eight months.

I have searched for solutions and have tried deleting the pkcs11.txt and secmod.db files but the problem reoccurs. There is no rhyme or reason as to how often this happens. If I new where the passwords were stored, I could copy the good password file back into the thunderbird directory.

Any suggestions would be greatly appreciated.

Thanks.

Hi, A couple of weeks ago the Mozilla Thunderdirb I have installed on my laptop had an update. Since then the programme does not start. How can I fix this issues? Thank yuo in advance, George

I have thunderbrird on both my laptop and computer, i got home, and did my normal, and on my computer it come up with Authentication Failed, its only doing it on the computer, but no the laptop, i have version 115.4.1, on both, but howcome it only doing it on the computer not the laptop? should i re-install on the computer?? or is their another way to fix this problem?

Hi Folks. About a year and a half ago I some how got hacked in communication with a help desk somewhere. From that point on , I have not been able to use my Thunderbird email. It asks for my password that I do not have. I have spent hours trying to reset it. I have tried a clean reinstall, but it recognizes me and asks for my password. I have my email addresses saved and would be happy to do a fresh install, but I have not been able to figure out how to do this. I am very much obliged for any help you may offer. Thanks Tom Adams , [edited] @comcast.net [removed email, phone# and location privacy info from public]

Upon initial setup, Thunderbird says the ISP is recognized and auto-populates all the settings. Well of course these settings don't work and I'm unable to log in and receive some sort of message saying it didn't work. If I login using a browser via cellphone, I'm provided with the list of settings to use with email clients which is as follows:

Domain: @hot.rr.com SSL: On for SMTP and IMAP Protocol: IMAP Incoming Server: mail.twc.com Incoming Server Port: 993 Outgoing Server: mail.twc.com Outgoing Server Port: 587 Requires Authentication: Yes, or checked

Using these settings in manual configuration results in receiving the "Thunderbird Failed To Find the Settings For Your Email Account" message. The only difference between the settings that were auto-populated and the settings provided by logging in via web browser on a cellphone are the incoming/outgoing servers. Auto-population had them as mobile.charter.net, and they're listed as mail.twc.com by the email provider to use with email clients.

I'm trying to solve this problem for someone else and they happen to have the same email domain as me so I can fiddle with it without having to be at their computer with their passwords, etc. Presumably if I'm able to find the solution it will work for both of us. I don't normally use Thunderbird or any other email client, I just use web based email but they prefer to use a client. However, I'm doubtful that it will work considering the fact that settings provided by the email provider don't work.

Any input is appreciated.

Yesterday I deleted the All Mail file of my Gmail account by accident on my iPhone while away from my computer. When I got back to my computer I discovered that this had chewed through a lot of my files and I had many empty files including some which were archived in Thunderbird so should have been saved on my computer. No problem I thought, I will undelete files using webmail but when I went into Gmail webmail I found that I didn't have many messages left. In my backup file which I checked in Thunderbird offline, I had about 24,000 messages but could only find about 4,000 on the webmail account. As soon as I went online with Thunderbird, the messages in my backup began deleting to match the online situation. So I have a number of questions.

How did deleting the All Mail file on my phone somehow affect my archived messages stored in Thunderbird in my local files? I suspect they are part of the same string that makes up All Mail but should somehow be separated.

Notwithstanding that issue, the main problem is how I can use my back up to repopulate the online Gmail string so I don't continually get the truncated Gmail which is revealed in my webmail. Is it possible to reverse ImapMail so that the web Gmail matches my backup rather than the usual reverse situation? In the meantime, I can use my account at the cost of losing messages every time I go online but I need to recover from this situation fast.

This is probably a mess of my own making, having been lazy about back ups. My laptop threw a critical error at me just before Christmas and I could only fix it by doing a reset and reload of Windows 10. (I think it may have been a partial HDD corruption) I selected the option to retain personal data files etc, but the reload wiped almost all my installed programs, including Thunderbird. Documents, etc folders have all survived. I re-installed the latest Thunderbird and it is working fine. However, I appear to have lost my Local Folders (as well as my address book) Not a life-or-death matter, but I would prefer to recover them, if possible. I have an "..@tiscali.co.uk" (TalkTalk) email account, with IMAP settings on the incoming mail and SMTPS on "sent" items. I can see all incoming emails that are still on the server, but the "sent" items folder is empty. All local folders and contents are gone. I have read up on the Thunderbird Profile and understand that it is separate from the program folder. I have used the "Help>Troubleshooting>..." feature to find that my current profile is "zqx......default-release". Using file search, it also indicates that there is another profile file, "k32....j5.default", in the same area. Both have creation dates corresponding to the reload time. I cannot find anything similar in the "Windows.old" folder that was created at the time of the reload. Is it possible that the folder contents are still in the HDD and it is just the file address that is lost? Thanks. Neil

Running 115.5.0 and want to export my contact list to be able to use it in a spreadsheet. The export function in the Tools dropdown only allows for export of "accounts, messages, address books and settings to a ZIP file." What happened to the ability to export just the address book separately to a csv file? Please help. Thank you.