Thunderbird-Hilfeforum

Is there a way I can make a filter that responds to the displayed sender (which may be different from the address)? For instance if an email has the header “From: "John Doe" <john.doe@example.org>”, can I make a filter check if “John Doe” matches a pattern?

I have an issue with using newgroups via NNTP server in Thunderbird. News only load during startup of the program. Whenever the option Get Messages is chosen later, or when it is automatically run by the program, the process seems to get stuck in a loading state. In this state neither can new messages be read (the headers seem to be there and are shown, but the body of the message isn't), nor can new messages be sent (message sending gets stuck in status "Assembling Message")

This has been the case for a few releases already, and is currently present on 115.10.0 (64bit)

Has anyone seen a message similar to this when trying to attach a document, usually a pdf to an email?

O:\XXXXXXXXXX.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences.

Also, when someone send me an image file, I can't open it directly from the email. I have to download it and then open it. This isn't as big of an issue as the above, but I thought I'd ask it too.

Thank you

Windows 10 Thunderbird 115.10.0

When I'm writing a new email, I receive several copies of it in my inbox without explanation. It's a recent situation and I can't find a solution. Can you help? Thank you. freiroma@sapo.pt

Hi Again,

I just enabled cookies in order to fix a connection problem with Google and Xfinity. While going through the process, I noticed a Facebook web address was pre-filled, and I immediately deleted it before realizing "block" and "allow" are both on that same page. Can someone please paste that link here so I can put it back where it was?

Thank you!

Hi

I have used local Thunderbird folders for my Gmail accounts for a long time, and have now started using Protonmail (via Proton Bridge to Thunderbird) as well. Sending and receiving Protonmail via TB works fine.

I want to keep my single local inbox, sent folders etc. I set up a filter on the TB Protonmail account to copy all incoming emails to the local inbox. Works fine. I have also configured TB's Protonmail account to copy any emails created in TB's Protonmail account to the local 'sent' folder. All good.

I now want to get any emails sent via the Protonmail app to be copied to my local 'TB sent' folder - but have failed to get this to work.

If I create a TB filter to run on the Protonmail IMAP 'sent' folder, it CHANGES the separate TB inbox filter from running on the IMAP inbox, to run on the IMAP 'sent' folder!!!

I want to have two separate filters for Protonmail IMAP - one for 'inbox' and one for 'sent' - but they keep resetting so that both run either on the IMAP inbox or 'sent'. I thought filters were separate entities, but clearly not.

Am I missing something, or have I stumbled across a bug?

Thanks in anticipation.

OS is Win 10 64bit TB is 78.4.0 (32 bit) (is that a conflict?)

For NO known reason TB had to be restarted. Opened, BUT only one folder, NOT the Inbox, is displayed. Cannot see NOR access the Inbox, nor any folder (none displayed). Restarting TB produces the same result every time.

If searched any - all TB headers / options. HELP & support yield no clue(s) nor solution(s).

I have an email account with IONOS and my wife has an account. We have had these accounts for several years. Recently my wife can not send email. We are configured the same and I do not have a problem. Server: smtp.ionos.com Port: 587 (tried others at IONOS support request) Security STARTTLS Authentication: Normal password. When she tries to send or forward with a simple text (one letter or larger, it does not seem to matter). She gets the following reply: "Sending of the message failed. An error occurred while sending mail. The mail server responded: Transaction failed Reject due to policy restrictions. For explanation visit https://www.ionos.com/help/index.php?id=2425&ip=198.177.53.191&c=hd&r=0MQ4Bx-1rqmFh0x4l-00ErW3. Please check the message and try again." When trying to go to that web page, it does not exist. I have gone to IONOS support and we have both looked at the configuration and can see no differences between my set-up and hers. I have deleted all email address from her machine and reloaded Thunderbird (115.9.0), restarted her machine and added back her email. Same results, she can receive but not send. If she uses her phone, it works, and if you go to the IONOS web site and use there service it works. I'm at my wits end and can not figure it out. I have also opened an incident with the IONOS Postmaster, which I think is their second level support. Please help.

I have two computers, one older with TB 115.9.0 32 bit, pop. The other has 115.9.0 64 bit, imap, same email address. I have tried to merge them, but when i do the Thunderbird Import folder has zero messages and no subfolders. I also tried changing the old TB to IMAP, didnt work: "configuration problem". Any help would be appreciated.

Hey there Team!

So I flipped my table because of the new Outlook update and I'm beyond frustrated.

Not only it does not show the unread email count but also stopped working for my work email, making me miss a serious meeting!

This is ridiculous!

So now I'm transitioning to Thunderbird however, my Inbox is showing the total amount of emails. This is not what I need. What I need is the unread amount of emails.

On top of this, if I minimize the email, the Inbox amount count merges with the amount count of Sent Items. This is not what I need either... What I need is to solely have the amount of unread emails.

How can I achieve solely unread email count with Thunderbird?

Please keep me posted as I'm losing my last screw over setting up something as basic as this. -Val

I use Thunderbird as a central repository for 5 different email addresses. Recently 1 of them stopped getting Sent messages that were created on Webmail or my Phone. I used to work fine, now it doesn't. This account is the only one I have that is set to POP3; the others are IMAP.

I'd change the settings to be IMAP but don'e see how to do that. And, I don't want to lose any messages and would like to capture the ones that have not been captured.

Any thoughts?

Hello, For some reason, over the past couple of months I have been searching for varied emails and they are missing! At one point, I found that some had been put in an archive folder (that I did NOT set up) and they were recent emails. I removed them from the folder, placed them back in the regular inbox and deleted that folder. When I could not find another very important series of emails today, after searching numerous ways, I looked in the server and missing emails are there. I did look at a number of email threads where other people reported similar problems... but couldn't figure out what applied to my situation and how to fix this. To show a specific example, I attached two images ... the first is my Thunderbird email account that shows one Email only on Feb 18, 2024. The Juno server image shows 7 emails on that same date, four which were important contracts that were sent to me. Can you please help me locate and retrieve these and other missing emails? Thank you very much. Ms Randy Rosette

I've got a Fastmail account, and have set up CardDav according to Fastmail's guide to get set up with Thunderbird.

Once my contacts synced, I was unable to see my contact lists in the Thunderbird contacts sidebar, nor can I add a list (the button is greyed out). Is this a known issue? Is it Fastmail specific, or a CardDav thing?

Running macOS 14.3, Thunderbird 115.9.0

Hello! I am facing the issue with time zone translations. Here is what I do. First, I create event on web-interface of the google calendar. That account is linked to TB's calendar. This calendar has settings for my timezone as in the first screenshot, that is GMT+3 for Kyiv, Ukraine. It is actually GMT+2 + daylight saving hour in effect. Country is also set to Ukraine. Next, my Windows 11 system is set to set time and timezone automatically, region - Ukraine. It displays UTC+2 Helsinki, Kyiv,... I guess it's Windows settings display quirk, because time is correct and WSL console shows

~$ date -R Thu, 18 Apr 2024 18:59:25 +0300

My TB's calendar is set to have system's timezone as in 3rd screenshot.

Now if I see my event in TB calendar, it is placed one hour later, say 9 am event starts at 10. So reminders also come hour later. Also strange thing is that event properties in TB show correct time like 9:00 till 10:40, but for some strange timezone Europe/Zaporozhye, as in 4th picture.

However, if I set TB's calendar manually to Europe/Kiev (which should be Kyiv, but that's another story), then events are shifted hour up to their right place, 9 am. So this is my issue: when I set calendar forcibly to Kyiv timezone, it does translate it right. When I ask calendar to rely on system's timezone, which indeed is also Kyiv, then I get one hour behind.

When I answer an email TB adds Re: (or Fwd: ) in the subject line which I have laways found annoying. My previous email client allwed me not to have this happen. Is it possible to stop this?

It is possible I have asked this previously, but if so, I cannot find this and have received no replies. My apologies if I have!

I am an e-mail packrat.... I have a pop e-mail but keep years and years worth of old e-mails (inbound and outbound) some with big attachments. My backup for the few e-mail accounts I have within my profile is approx 13 gigs. I've moved machines... and currently running Ventura on my imac.

I have to force-quit all the time to get my e-mail working again. It hangs-up.... sometimes will recover... but then... I type a few words or maybe sentences... and back to HANGING-UP again. Sometimes after a Force-Quit... it will behave for awhile. Other times... it takes 4-5-6 force quits in a row to get the program working again. Been having these issues for months... and have taken out all the add-ons etc.... HELP... pulling my hair out! Thanks

Last week, sometime, I received ALL the emails, that have come into my "mailbox", from about the time I purchased my latest computer, several years ago. There must be hundreds, if not thousands, of the little critters. All arranged alphabetically, starting with the letter "a". So far, the ONLY solution I've found from "Thunderbird Help", is to 1. Open inbox 2. Select [left click] one of the repeated emails. 3. This high lights the email in BLUE. 4. Select BOTH "CONTROL & A" KEYS at the same time. 5. This highlights the WHOLE PRESENT page of emails in BLUE. 6. The instructions then say to press the "DELETE" key. 7. Question is- IF I PRESS THE "DELETE" key, will that just delete the emails on this page, OR delete EVERY email in my entire "inbox"? The only OTHER remedy I've tried, is to send the unwanted emails, ONE at a time, to the "TRASH" folder, then empty the "TRASH" folder, when I get 10-15 emails in it. That could take a VERY long time. Awaiting your suggestion[s]-Joel Payne P.S. Might this happen again? If so, it may be time to go back to Carrier Pigeons.