Forum der Gemeinschaft Thunderbird

I am running on TB release 60.5.0.

In the TB previous release, TF&SC worked fine for text (font) size control on incoming and outgoing messages. In the latest TB release TF&SC does not support the text (font) size.

The text size is miniscule. I can use the "ctrl +/-". However, this procedure is a drag when TF&SC has worked flawlessly in the previous TB release.

Is it not time for TB to have built-in text/font sizing control?

Your help on this issue would be appreciated.

Regards,

mikeandsylvia

Running TB 38.0 on an iMac, OS 10.6.8. This seems to be new problem as of the past day or two. I noticed all sorts of extraneous contacts listed in the sidebar, and realized that those were in an address book, separate from my personal addresses, that lists incoming addresses I've granted permission to load "remote content." Eventually, I realized that this was because the pop-up at the top of the contacts sidebar was set to display "all address books" rather than my "personal address book." If I reset the pop-up to "personal address book," it displays the correct list, and will default to the "personal address book" in subsequent composition windows that I open during the same session. However, if I quit TB, when I relaunch TB the sidebar reverts to "All Address Books" by default. How can I get it to retain "personal address book" by default, even if this is the first message I'm composing after launching TB? It did so in the past!

The latest version of THUNDERBIRD was automatically downloaded yesterday. The first time I used it to do my e-mails, I noticed a MAJOR change in the addressing section. With earlier versions, once you typed in a person's e-mail address, and pressed the ENTER key, the NEXT open line for additional e-mail addresses was the SAME type as the previous one (To:, Cc:, or Bcc:). Now I noticed that when sending an e-mail to multiple addresses, each time you are forced to change the mode (To:, Cc:, or Bcc:) Do you have any idea how annoying this is??? WHY would this feature be included?

Also, WHY does the cursor disappear many times when editing an text message? This is also very annoying & has been an ongoing problem with several previous releases of T-BIRD.

Finally, I do not understand WHY, when editing certain text of an existing e-mail, when the cursor is placed at the end or close to the end of a line of text, AND the END key is pressed, the included text is highlighted. Pressing the DELETE key then moves the undeleted portion of the text line to a line ABOVE where it first appeared. This is very strange, and also annoying.

Thank you.....

The Theme & Font size changer periodically stops working (all the messages become tiny) and goes missing.

I have tried reinstalling version 62.0 for TB, but nothing happens - in the past when I've done a reinstallation it has worked.

Can someone please let me know why this is happening?

P.S. I use the same Theme & font size changer with FF 57.0.4 and it works fine, never goes missing.

When I select "Edit as New Message" in Thunderbird (v52.9.1) on a Mac, the message editor comes up in html mode even if I have set everything to plain text.

I have read all the articles on this and done all the things people have recommended including messing with Advanced options, account settings, etc. However, none of these solutions work.

Attached is a screenshot showing the problem. The first screenshot shows my inbox. The second shot shows that "Edit as new message" comes up in html mode.

Please advise.

Yo all !

I just upgraded an old Outlook 6.x express to TB.

To my surprise the mail filter apparantly misses an essential functionality.

You cannot filter a mail address on it's domain, but only on the entire mail-address.

So instead a single filter on "@hotels.com", You must create a filer one each (new) name that appears, like

offers@hotels.com last_chance@hotels.com spam@hotels.com etc... etc...

And especially those ...pain-in-the-a***... rayban sunglass spammers, that change name every week cannot be filtered (thay know that TB misses this, so thats why thay do it).

This lack of funcionality is allso decribed in the online doc. with the use of the "from" and "is" in the filter rules, which only takes the full address.

COME ON MOZILLA - make the (simple) patch, so We can sort out an entire domain instead of that bird-picking.

I thought I upgraded from Outlook Express, but apparantly not, because this functionality has been there since ages...

Im soon looking for another client.....

After following instructions twice I am stumped. Trying to install "Theme and Font size changer". Search, select install, restart TB. No change, no button, nothing in tools menu. All help is appreciated.

My Quick Filter Bar has been disappearing for years. I add it back by selecting View-Tools-Quick Filter Bar but eventually it will disappear again. It will remain a few weeks or so and then it will be gone. I don't know the behavior that causes it to disappear. My only guess is that I coincidentally hit some sequence of keys that de-selects the option. Any ideas on how I can prevent this? I have version 52.5.2 (64-bit) but it has occurred for many, many versions. I would very roughly guess it has been occurring for over 6 years.

Thanks, Mike

Made a mistake by changing user_pref("layout.css.devPixelsPerPx" from I think - 0.5 to +0.5 as incoming emails font was miniscule, but made nor difference... so thought it may be a font size, so changed to 12.... Now ginormous and unreadable. Searched through pages here for an answer and got to the prefs.js folder to find this file but it is not there.... I searched with notepad edit search for "layout" but no luck. Any ideas anyone? I tried adding the line user_pref("layout.css.devPixelsPerPx", "1.5"); whilst TB was closed and then opened TB but had made no difference.. :-( Any ideas anyone? TIA Graham

All of a sudden, I can't see emails that I know are there because the subject of a previous message in my inbox is underlined. I can find the emails when I search for them by putting in a recipients name. And when they show up the thread column exhibits a red flag (don't know what it means). HELP.

How can I set the email message sort to descending date for all folders in all accounts? With many accounts with many folders each, manually changing the sort from ascending to descending is a lot of needless work. A global default is needed, and if there is one, I can't find it.

I have tried several times to add my icloud imap mail account to TB without success.

I have been able to talk to a live person at Apple and they have tried there best to help me. They have an app. specific passwords for third party applications. I have used this password in my setup with TB.

The enclosed image shows the settings from Apple for this mail account. A second image shows the error message when trying to send an email from this icloud account.

I would really appreciate any help you can give me to fix this problem. Linda

New PC and so installing Thunderbird again. Want to set up a sound alert for new messages, but there doesn't seem to be any sound files at all, default or otherwise. I tried putting Tonequilla in, but that doesn't seem to work with this latest version of Thunderbird which is a shame as it's really useful for me to have an alert since I moderate a forum.

Up to now I have been using the FireTray add-on, this is no longer working in Thunderbird 60 even if I enable legacy add-ons. I do believe that Thunderbird is making a catastrophic mistake by cutting itself off from a large part of its add-on ecosystem, but I don’t want to debate that here. What I think is really missing is some form of indicator that new e-mail has arrived (not unread but new) that is not transient. If I leave my screen for a while with a minimised TB process running, I will now have to maximise the window and check all accounts (actually, all folders that might receive new mail via filtering) to see if I have missed a new mail notification while I was away. The same applies if I was at the screen but focused on something else. With FireTray I would have seen a change in the tray icon. Now it seems that I have to check the folder pane for a colour change in the names of all candidate accounts or folders. I cannot believe that TB developers want to force us to do constantly inspect the window, so I’d like to know how I am supposed to be able to check if new email has arrived without having to maximise the window. Any suggestions?

Hello, I have Win8 with black borders, so I can't read and see inactive tabs at all. (http://i.imgur.com/9feS5wN.png ) I want to change the text color and make it so that the hover effect is displayed at all times. (http://i.imgur.com/wRubuQ3.png )

I found a bunch of different things to do, like "tab:not([selected="true"]" ".tabmail-tab" but none of it works. So which identifier (or whatever it's called) can I use? And how can I achieve the hover effect?

I hope someone can help, thanks in advance :)

Edit: I got the hover effect working, it's in a post on the bottom of the page.

Monday afternoon I received a work-related email. I crafted a reply, and wanted to have it sent in the morning, so I pressed "Ctrl-Shift-Enter" to Send Later, which used had worked in the past.

The Send Later dialogue box did not appear, and I saw that the message was moved to my Outbox. Without any Send Now indication, I figured I'd just send it at that time.

The Reply arrow/symbol was on it, and I saw it in my Sent folder, so I figured it was sent.

Two days later, my client had not replied. She's always replied within 24 hours.

Wondering if she received my reply, I replied again, to her same email, sending it normally. The Reply arrow was still there, and that one was in my Sent folder too.

Today, my client wrote, implying she did not receive either message. How can I know if my message is really being sent? Is this a known issue? If so, is there a fix?

When I use some distribution lists I want to expand the recipients and remove some. The "Expand Recipients" extension is great but it only shows the email addresses. Is it possible to show the names to make it easier to edit?

I have two groups of email addresses that I sent group mail to. If I want to exclude one or more people in a group due to the content or something but do not want to remove them from the group, how do I do this? I also forward mail to these groups and if one of the people in the group has sent me a message that I want to sent to the group, I want to remove the senders name before forwarding the message but do not want to remove the sender from the group. In my old email software when I add the groups to the message I could double click to show the mail addresses and remove any that I did not want to include for the current message, without removing them for the group.