Thunderbird-Hilfeforum

Suddenly unable to send any emails. Able to receive / read. In Charter / Spectrum able to send. Port numbers are correct (143) for Incoming & (25) for Outgoing SMTP. Did try to change Outgoing Port to 587 per one of your posts. Didn't work. This is error message I get.

I have 4 accounts with different names but all with the same domain name (name1@samedomain.com, name2@samedomain.com ...). The first one set up perfectly and works. The 2nd and the 3rd can't retrieve mail from the server (didn't try the 4th yet). The SSL ports are the same for all. The passwords happen to be the same for all. (I haven't tried changing the 2nd and 3rd passwords as that seems unlikely to be the problem.) When initially setting up the 2nd or the 3rd I get a "Sending of password for user name2@samedomain.com did not succeed. Mail server pop.yyy.zzz responded: [AUTH Authentification failed." I've checked the passwords on both the client and the server ends multiple times and they are the same. Then, of course, periodically I get a pop-up with "Login to server pop.xxx.yyy with username name2@samedomain.com failed. When I go to the Account Settings screen with the 3 accounts and click on each Server Settings one after another, the only thing that changes is the User Name, yet the first account receives mail and the other 2 don't so everything is correctly set up. As an aside, I CAN SEND emails from the 2nd and 3rd accounts but can only RECEIVE and SEND from the 1st. Any help appreciated.

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

There are two "bad email" files in Thunderbird: JUNK and SPAM. I'm still not clear on the difference.

For JUNK mail, TB gives us the option to select "NOT JUNK". Good.

But for SPAM, I cannot find the option "NOT SPAM"

1) Why are there separate SPAM and JUNK directories? And why are they managed differently? This seems terribly non-intuitive and inconsistent and just strange.

2) How can I train SPAM filter to not flag good email from trusted senders? For instance, I get email from my wife many times a day for many years. Today, TB put her email into SPAM. Isn't there a simple command to "white list" a sender's email address?

I am running Thunderbird 115.9.0 on Lubuntu 23.10. I have 4 IMAP accounts I use. The folder and file is not shared and I am the only account with access to the directory.

I use emoji as tags for messages, and have a large number of filter rules defined, nearly all of them Tag a message and set the Junk Status to `Not Junk`. These rules are all set to execute `Manually` or on `Getting New Mail`.

If I select a given inbox folder for a mailbox and select `Tools` > `Run Filters on Folder`, all of the messages are properly tagged, however, after some time (10m?, On new mail receipt?) at least one of my mailboxes will lose all of the tags that were previously set for messages. Manually running the filters will restore the tags, until they disappear again some time later.

I've not seen anything in the Browser Console log (but perhaps I'm not using the right term?) Is there any way I can diagnose or fix this issue? Thanks!

I need help with an abusive administer he only an administer because he stole my e-commerce operating system in 2017 by putting malware on to my keyboard port so no key board would type I could not stop him I was originally hacked in 2014 I shut down my system that was unopened at the time for two years until I had gone through 25 devices because the abusive administer put malware onto all my devices and ruined them this has got to stop u just won money I can’t get into my google account because he changed my password and took my phone numbers because of so I can change the password to get into it I have about 25 google accounts for this reason every time something good happens and money is involved he takes my accounts so it don’t happen this isn’t the firsts time he has done this very same thing some one has to stop this criminal He takes Money off my cards and spends my money how much more of this do I have to put up with he is not an administer he is a hacking thief and I demand help

Old computer: Windows 10 Pro, 64 bit Thunderbird 115.10.0 32-bit (Don't know why it's 32-bit version on a 64-bit computer or whether that's relevant)

The Profiles folder is here (with 5 profiles): C:\Users\<User>\AppData\Roaming\Thunderbird\Profiles

The new computer is Windows 11 Pro, 64-bit I just installed Thunderbird (V115.10.0 (64-bit) on the new computer.

On the new computer, the Profiles folder is here: C:\Users\<User>\AppData\Roaming\Thunderbird\Profiles

I followed the directions here https://support.mozilla.org/en-US/kb/moving-thunderbird-data-to-a-new-computer

I basically took the Profiles folder that came with the Thunderbird installation, renamed it (Profiles.orig) and copied in the Profiles folder from the old computer in its place. When I start up Thunderbird, I get this error message:

           Your Thunderbird profile cannon be loaded.  It may be missing or inaccessible

What am I doing wrong? I've updated Thunderbird on the old computer and copied the Profiles folder over to the new computer again. Same result.

Could it be 1. an issue with the user name on the old computer is different than the one I'm using on the new computer? 2. All files on the new computer are set up as local (the user on the old computer started out as a Microsoft user but I made it local so as not to have to use OneDrive).

I'm stumped. Any help will be very much appreciated. If you need any more details I'm happy to provide them.

I've been trying out Thunderbird and Spark for the past few weeks, and decided to go with Thunderbird to replace Windows Mail. After uninstalling Spark, I changed all my email passwords, and now Thunderbird can't connect. I deleted my Google and Xfinity email accounts from Thunderbird, then closed and reopened the program, but I'm still getting this error from Google when I fill in the credential info it automatically asks for when re-adding it to my account:

"400. That’s an error.

The server cannot process the request because it is malformed. It should not be retried. That’s all we know."

On the "set up your existing email address" page in Thunderbird, I'm getting this error (see image), even though the copy/pasted password works fine when logging directly into Google.

I also can't reconnect to Xfinity at all. The 3rd party box is checked in their system, but when Thunderbird tries to connect, it looks like it's auto-filling and submitting a password on my behalf, without stopping on that screen so I can change it.

I did this: https://support.mozilla.org/en-US/kb/password-manager-remember-delete-change-tb

And tried all of the suggestions on this post: https://support.mozilla.org/en-US/questions/1434503

What am I missing?

Hello. In our company, every employee has an IMAP account, but over time the IMAP profile takes up too much space on the hard drive (100-200GB per user...). What can we do to have more storage space? Can we delete the file? Or will all emails also be deleted from the server?

I updated Thunderbird to the latest version and now I have a problem that continues to remain after closing the process.

Thunderbird 115.10.0 64bit (Build ID 20240412173147) OS Windows_NT 10.0 22631

I've been using TB on 2 of my smaller email accounts for several months and really like the way it operates. I'm nearly ready to add my main email account (web-based Outlook) to TB but have one final question. If I add the account to TB, give it a fair try, and just don't like the results, can I simply delete that account from TB and go back to accessing it via its website? I have confirmed that POP is disabled for my Outlook account so I understand all email remains on the server until I remove it. I also understand TB would leave the email from the account on the same server, again pending some action I might take to remove it. So it would seem that I could delete the account from TB and revert to web-based access for the account, just as I'm doing now, and the folders and saved emails would still be there. Am I overlooking anything?

Hyperlink insertion only works in troubleshoot modes but not in main mode even if all extensions and hardware acceleration are turned off (used this guide: https://support.mozilla.org/en-US/kb/troubleshoot-mode-thunderbird#w_the-problem-no-longer-happens-in-troubleshoot-mode)

Please help me.

Thank you!

I upgraded to Thunderbird 115.10.0 (x64) earlier today and now the program is no longer closing completely (I've tried using the X at the top right of the window, and I've also tried File menu -> Exit). I first discovered this when I was using CCleaner to clean my temporary items and it asked me if I wanted to close Thunderbird after I had already closed it. I then checked my running processes and there are three Thunderbird processes that remain after the program has supposedy closed (Task Manager screenshot attached).

Any help with this seemingly new bug is greatly appreciated!

Much thanks, -Snipe

I want to prepare emails in advance (in the Outbox folder?) and have Thunderbird send them later, at a time that I specify when I prepare them. I looked at the Events and Tasks tab but I can't see how to do what I want with a task. All the prepared emails can be sent at the same time. Can it be done? Thanks Peter M

Hello, I've found this article [[Knowledge Base Article|https://support.mozilla.org/en-US/kb/maildir-thunderbird]] which substantially says that the use of maildir is deprecated. Has anything changed from the time that article was posted? I'd like to use maildir, it seems to me a more rational way to store e-mails (and it's also better to make incremental backups).

Thanks in advance Denis

Hi, Excuse my poor English (I am French). Linux Mint 21.3 Cinnamon (64), Thunderbird 115.9.0 (64) no added module - Installation from the Mint list of software. My problem : regardless of the provider (Proton, Gmail, Outlook, GMX - in IMAP), the message menu bar (see <https://support.mozilla.org/fr/kb/personnaliser-la-liste-des -messages#thunderbird:linux:tb115>) does not appear. How to make it reappear ? I think I have tried all the configuration menus and possible right clicks within Thunderbird ; I haven't found anything on the Net ; starting in safe mode did not change anything. I come from Windows 10 where I didn't have this problem. Thanks in advance for your help

I clicked the 'a' key on a folder in my email and a stack of emails disappeared. Some unread and some requiring a response! They're not in the archive folder.

Thanks!

When I print an email, TB prints all of this technical jargon such as X-MS-Exchange lines, and what seems to be the background handshake protocols behind the email. I just want the contents of the email printed. May I ask how I fix this, please?