Thunderbird-Hilfeforum

I have an issue trying to configure a secondary email account, for a non-profit I do some work for. It was ok in the past, though I recall was tricky to set up on TB a couple of years ago. But now it has ceased to function after I migrated TB profile (successfully apart from this issue) no matter what I try. I’d be grateful for any suggestions. As is the case with many non-profits, there’s little tech support, but others can use the email account ok. I think it may be a TB issue as I have been able to set up the account ok with MS new Windows Outlook app (lame, but better than Mail…low bar). I’d rather have this account on my TB client along with the others I use. And the issue is replicated on two of my PCs. TB account set up reports “can’t detect settings from host server”. I found a support thread link text, which says “The failure to detect settings is rather common where hosted domains are concerned. Mostly because everything is done to a price and most of the things around encryption are done in a halfhearted manner. As is the server setups for mail. However by faithfully copying the settings from the provider as to domains server name and ports it should work.” So I did manual configuration – copied the settings from the successful Outlook set up, but no dice – all I get is server time out message. Settings are: IMAP server: mail.XXXX.org.uk Port 993 Security SSL/TLS [earlier working settings were STARTTLS port 143] SMTP server: mail.XXXX.org.uk Port 465 Security SSL/TLS [[earlier working settings were STARTTLS port 587] And using Normal Password for both; I tried Autodetect too but no good. I’ve see a suggestion that turning off the firewall (Norton) might work, but I’m reluctant to do that and doesn’t seem to make sense that would cause the issue. I found another suggestion that apparently works for some people - leaving password blank on setup. https://support.mozilla.org/en-US/questions/1399690. Before I try, are there any other suggestions or ideas? Trivial matter in the long run, but bugging me. Thanks

I have found several on the internet, but none of them work.

At this point I am beginning to get desperate.

Thank you to one and all for assisting me. Ask me if you have any questions or info you need.

/arno

Hello, I installed Thunderbird using POP3 to download all emails from my Zoho Mail server to store them in my PC but although all emails appear now to be in the inbox, there are no subfolders, emails are grouped according to subject titles and I cannot seem to find the latest email on the list. What can I do to display them chronologically by date and restore subfolders and archives? Upon lauching, this is what I get. Thank you

Good morning Windows 10, TB 115.11.0 32 bit. Multiple email accounts, some gmail, others like sfr, lol and free. All accounts use POP. All working before weekend, shut down the PC. Monday morning, opened Windows, all seems there except TB which has a screen with an Account Setup tab inviting me to set up an existing email address. Close that tab and the attached screen image appears, open tabs blank, no accounts pane on the left, no emails, no local folders. Nuffin. Restart TB and Windows, twice, still Nuffin. Look in Profiles, yes, under Mail all profiles appear to be present and the correct size. Going to gmail’s on line email system shews account open and receiving email normally. I had a problem a month ago after a TB update when all accounts were present but no emails were displayed. I changed the password to 0auth and recovered my emails. That took three days to resolve and I lost a business client through the delay in responding. Today I must file several court documents or I shall be in deep poo. Any suggestions how to recover the left hand accounts pane and see the accounts and folders will earn my undying gratitude.

Our app sends an email advising the specified individual to note a series of images presented in three rows of nine. The rows display in Gmail via Windows->Chrome, via Android, and iOS with a Yahoo account.

But not in Thunderbird. This is a serious issue as I believe I have followed all the correct settings including in-line display, and yet for some reason, Thunderbird does not display the images.

Any suggestions are appreciated as I am baffled since Thunderbird has been my go-to email client for years.

When you highlight an email and then delete it, the little check box at the far left then 'jumps' into the email either above or below the one you deleted. How can you stop that from happening? I've attached a screenshot to illustrate my problem. How do you stop the check box on a deleted email from jumping to an existing email you may not want to delete?

Hi I am having problems with Thunderbird, i’m not sure if it’s to do with a windows 11 update or something else. Thunderbird is not responding also at the start of the ‘not responding’ emails from one of my accounts disappeared and then gradually started to reappear but didn’t get up to date and now just not responding st all. I have tried various things to resolve this, uninstalling and reinstalling Thunderbird, doing this and opening my pc in safe mode, doing this and opening Thunderbird in safe mode. Deleting and reinstalling the latest windows 11 update, reinstalling the latest Thunderbird update. I don’t know what to try next? I read somewhere to delete your profile, after saving it, and getting a new profile but no idea how to do this. Any help appreciated.

Win 10. Multiple email accounts, some gmail plus others. I had TB 115 something (it's uninstalled so not available to see). I run Firefox without issues. TB went completely haywire, all email accounts disappeared, nothing worked (second time this year) but recovering was proving too difficult and I'd already spent a whole day on it. I decided to uninstall and install a fresh copy. First I copied the single profile to an external drive. Then I uninstalled TB. Then I ran Ccleaner to tidy up the remaining TB cache and other remnants, also cleaned the registry. I downloaded a new copy from Mozilla's site, ran the install file, The install dialog box offers the same install location as the previous location, same user. Upon clicking install, the dialog box disappears and nothing happens. I've tried this more than ten times now, including fresh downloads from Mozilla. The dialog box offers an alternative user as Administrator but that won't work because I don't actually have the administrator account set up with a password, and TB demands the password. I do not want to open a new user account just for TB. Any suggestions for working round this will be gratefully received.

I use the search feature a lot, and it's extremely annoying that every time after the search I have to click "Show results as list" in order to get a proper view of the search results. The default view is quite poor in my opinion.

The question is: why isn't there an option to show the search results as a list by default?

It would surely be a very, very easy feature to implement, and as I was googling for this, I noticed that users have been asking for this for YEARS now. Why on earth hasn't it been implemented?

dzień dobry, od jakiegoś czasu na jednym z moich adresów po kliku dniach znika poczta, kasowana jest też z serwera, jaka może być tego przyczyna? podstawowe ustawienia są takie same dziękuję za pomoc

What is the meaning of the various symbols I some times see next to messages in my Inbox? They're small, but some appear to be arrows?

Is there a list somewhere that would explain them all to me? That would be most useful!

Thunderbird v115.11.0 on Windows 10 x64

I have six identities / accounts ie. NAME1@cox.net, NAME2@cox.net etc.

In the Account Settings window for NAME1, at the bottom, is "Outgoing Server (SMTP)" for which I use "smtp.mail.yahoo.com (Default)". That's the same on all the identity Account Settings btw.

To the right of that is an "Edit SMTP server..." button which opens a small window. At the bottom of that is an entry for "User Name". For which I enter "NAME1@cox.net".

At first this works fine to send mail from the identity NAME1@cox.net

HOWEVER, when I use the same method to "Edit SMTP server" for NAME2.cox.net... it CHANGES the NAME1 settings made above! So sending mail under that identity no longer works.

Overall, this means that only the last identity that I configure can send mail, because its outgoing SMTP credentials are being automatically stuffed into all the other identities, which prevents them from communicating with Yahoo.

On the surface this looks like a bad bug in TBird but, as usual, I can't find anyone that has the same problem. Those are symptoms of me missing something.

Any ideas of what could be wrong?

Hi,

I am facing an issue with Thunderbird.

I integrated my email address but there problem is the new message is giving "Undelivered Mail Returned to Sender" but I can reply and receive the emails.

Please guide me about it.

Many Thanks

Where are by Thunderbird gmails stored? I am running two email server programs right now (Outlook and Thunderbird). Outlook stores gmail in the cloud and there are thousands of them, Naturally I do not want TBird to store all emails on my hard drive but I am told they are on my hard drive. If so this will eat up ALL my disc space. Where does TBird store my emails? If on my drive then how to I control how many are saved there and what will saved in the gmail cloud?

Hyperlinked text does not paste into Thunderbird email

With Thunderbird’s apparently well-earned raking of #21 and market share of 0.0%, I will ask that this issue and exchange NOT directed not to the Support Forum (more part of the problem than a solution) but brought to the attention of the Mozilla/Firefox executive staff for I think this may demonstrate why this product ranks so low--- presuming Mozilla execs care about that.

The last, unprofessional retaliatory reply was from ‘moderator’ NoahSUMO who, rather than be proved wrong (like every previous wrong answer he defended) and allow the proof of those errors to be shown, instead retaliated by closing the question to prevent reply that might prove his stated prejudices are wrong.

Two points will suffice (see attached) to answer the questions NoahSUMO raised but nailed the door shut to prevent being refuted.

1. No, I have no older version of TB (why did not one ask before?). My program (since you failed to check) is up to date (see attached)

2. No, again, there is no HTML option to paste (See screen shot proof attached yet again– and refuted and shown again) . 3. I have no TB add-on’s at all (why did no one bother to even inquire)?

So the demonstrable solution to a problem Mozilla support can not solve (after multiple answers are PROVED AND DOCUMENTED as wrong) is to respond with self-righteous and rather juvenile tantrum to block and punish the dissenter who had the temerity to prove the advice of the ‘experts’ was wrong. This is less the behavior a forum staffed by adults and professionals trying to solve problem than a church of true believers intolerant of any dissent against dogma.

In response to To NoahSUMO his retaliatory display of intolerance follows and responses to his “No reply” reply are in ALL CAPS to distinguish. If Mozilla executives support this kind of support then they have no reason to complain they command 0.0% of the market share.

“I'm sorry, I'm afraid I'm going to have to close your question.

“There are many times in support where not every mysterious glitch or bug can be determined quickly & easily. Sometimes more time, testing & troubleshooting is needed to learn what is causing the issue.

“But rather than offer you more steps to try then watch you return, get defensive & berate others saying you've already tried that and did we understand the question and so on & so forth, I'm just going to close this question & leave you with these final thoughts (of which may anger you, simply for trying to help you troubleshoot your problem).

The main problem: “‘Paste as HTML: Instead of directly pasting the text, try pasting it as HTML. You can do this by right-clicking in the email body and selecting "Paste as HTML" or by using the keyboard shortcut (Ctrl+Shift+V in some applications). This should retain the formatting, including hyperlinks.’”

FALSE. AGAIN, THAT OPTION DOES NOT EXIST. SEE ATTACHED.

“Observations: Your Thunderbird version is unknown. For all we know, you could be using a older version of TB which is missing the "Paste as HTML" option from the right-click context menu. “

FALSE: MY TB PROGRAM IS NOT “UNKNOWN”. AND YOU NEVER EVEN CHECKED. IT IS KNOWN, VERIFIED, AND THE MOST CURRENT VERISON. (SEE ATTACHED.)

“You could have a addon installed that is breaking the context menu & hiding the "Paste as HTML" choice from you.”

THERE ARE NO TB ADD-ONS. NEITHER YOU NO ANYONE ELSE EVEN ASKED. NOW YOU RELY ON AN EXCUSE NO ONE INQUIRED INTO? NICE.

“You would need to disable ALL your addons in Thunderbird, restart the program then test again to see if the option was returned to the context menu. You might angrily retort you don't have any addons installed. Are you sure? You better check. If confirmed no addons are installed, move on to the next troubleshooting idea.

“YOU BETTER”?! WOW. NICE. NO, THERE ARE NO ADD ONS. AND IF YOU (OR YOUR COLLEAGUES) WERE TRULY INTERESTED SOLVING THE PROBLEM AND THOUGHT THAT MIGHT BE THE ISSUE THEN WHY DO YOU ONLY MENTION IT NOW AND NOT BOTHER TO TELL HOW TO DO THAT BUT BLOCK RELY? NO, THERE ARE NO ADD ONS. (SEE ATTACHED)

“Could your Thunderbird profile be broken somehow? Is it very old profile & a settings file got damaged thus hiding this option? Or again, are you using a very old version of Thunderbird where this option is not present?”

“COULD”? HOW WOULD I KNOW? WHY DO YOU ONLY ASK NOW AND THEN RETALIATE BY BLOCKING ANY RESPONSE? RATHER TELLING. THIS SPECULATION AND THREATENING “YOU BETTER” ATTITUDE DEMONSTRATE A CLEAR LACK OF INTEREST IN PROBLEM-SOLVING WHERE THE DEFECTS LIE SOLELY WITH YOUR PRODUCT AND YOUR AGENTS’ INABILITY TO REMEDY THE DEFECT OR EVEN ACKNOWLEDGE THE DOCUMENTED PROOF OF FACTS.

“Finally, no support forum anywhere on Earth can guarantee your problem will be solved. It takes lots of patience, lots of testing, lots of troubleshooting and lots of time. Sometimes if you work thru a premade list of common fixes it can help you narrow down the problem faster. If a support forum can't solve your issue, we are never happy about it & continue to think about it in the future in case we finally find the obscure resolution to your problem. Endlessly talking about the problem can not magically produce a solution. Real troubleshooting work must be done.”

THANKS BUT IF MOZILLA’S AGENTS CANNOT RESOLVE SO SIMPLE AN ISSUE WHEN THEIR OWN STATEMENTS ARE PROVEN FALSE, THEN AFTER THEY FAILED TO MENTION ANY OF THE ISSUES YOU NOW TOSS OVER, AND AFTER RETALIATING AGASNT A USER WHOSE VALUABLE TIME THEY HAVE WASTED, IF YOU AND THEY ARE NOT COMPETENT TO SOLVE SO SIMPLE A PROBLEM WITH YOUR PRODUCT BUT CAN ONLY RETALIATE THEN NEITHER THIS PRODUCT NOR ITS AGENTS ARE FIT FOR PURPOSE. 0.0% IS EARNED AND YOUR MARKET SHARE IS QUANTUM MERUIT.

FINALLY, IF YOU AND MOZILLA’S TB AGENTS CANNOT TOLERATE, BUT MUST RETALIATE AGASNT, A USER WHOM YOU SELF-RIGHTEOUSLY CENSOR AND SILENCE FOR CALLING-OUT AND DOCUMENTING YOUR DEFECTS AND ERRONEOUS STATEMENTS OF FACT, THEN, WITH ALL DUE RESPECT, YOU HAVE NO BUSINESSES SERVING THE PUBLIC AND ARE NOT AN ASSET TO MOZILLA BUT A LIABILITY.

“Even something like 3rd party programs have been known to inject themselves in Firefox & Thunderbird causing maddening issues that take us a long time to finally find out they were the cause.”

THERE ARE NO “THIRD PARTY PROGRAMS” INJECTING THE THEMSELVES INTO FIREFOX. THIS IS ALL MOZILLA PRODUCT. STOP BLAMING OTHERS AN ESCHEWING CULPABILITY FOR YOUR PRODUCT DEFECTS AND INABILITY TO FIX THEM WITHOUT WASTING OTHERS’ VALUABLE TIME.

YOU (TB AND MOZILLA) ARE NOT THE ONLY PLAYERS IN THE FIELD. WE END USERS HAVE WORK TO DO AND WHEN YOUR PRODUCT DEFECTS GET IN OUR WAY THEN MOZILLA CAN THANK YOU FOR THEIR LOSS OF MARKET SHARE.

“So I leave it to you, to analyze, troubleshoot & test this problem until you find a solution. I wish you the best of luck, I truly do.

“Thanks to everyone who offered their ideas to fix the solution here. I really appreciate your patience in dealing with issues like this.”

IN CLOSING, PLEASE DO NOT DELIVER TB USERS DISINGENUOUS LECTURES ABOUT ‘PATIENCE’ WHEN YOU DEMONSTRATE DISPARITY BETWEEN YOUR OWN WORDS ACTIONS.

PATIENCE? WHEN RETALIATION, CENSORSHIP, AND SILENCING OF DISSENT, ARE YOUR RESPONSES TO YOUR CUSTOMERS’S COMPLAINTS ABOUT YOUR INABILITY TO SOLVE SIMPLE PROBLEMS WITH YOUR PRODUCT DEFECTS THEN I WISH YOU GOOD LUCK IN THE UNEMPLOYMENT LINES AND BANKRUPTCY COURTS.

YOU TELL ON YOURSELF HERE AND DEMONSTRATE PRECISELY WHY THUNDERBIRD NOW COMMANDS A WHOPPING 0.0% OF THE MARKET SHARE AT THE BOTTOM WITH RANK OF #21. A POSITION DEMONSTRABLY WELL-EARNED. AND I TOO WISH YOU THE BEST OF LUCK, AT THE BOTTOM...IN A POSITION YOU HAVE DEMONSTRABLY EARNED. I TRULY DO.

My wife & I have the same PCs running Windows 10 & Thunderbird 115.11.0 (32bit).

We have a hosted web-site that also supports email, and we each have an email account (eg neddy@goon.com.au & minnie@goon.com.au). I've checked that both our POP server configurations are identical but despite that about once a week minnie@goon.com.au receives a warning to add security exception but neddy doesn't. This started happening two weeks ago after a years error free running.

The host has checked that goon.com.au has a valid SSL certificate, so what could be causing the discrepancy and how do I set about fixing it please?

Hyperlinked text does not paste into Thunderbird email. Only the text pastes in. The hyperlinks do not. If I paste in text that has several hyperlinks already embedded, only the text pastes in. The hyperlinks are lost. I must paste the hyperlinked text with the URLs. How do I do this? All searches are irrelevant. I know how to insert URL into new text but that is not the issue. My text to be pasted already has many hyperlinks in the text and I do not want to laboriousness do them all again. When I paste in a paragraph of text that already has several hyperlinks I want that ALL to paste in. How to I do this?