Thunderbird supportforum

I am using Thunderbird 115.10.1 on Windows 11. T keeps deleting my saved passwords. T takes a very long time to load. There are no saved passwords and I enter them all with the options to save. I check the passwords in Settings and they are all there correctly. When I next run Thunderbird it may or may not have them still saved. I check the Settings and they have gone; so I enter them again and they are saved OK. But then they are deleted some time later. I cannot see any pattern in the failure. I wonder if there is a problem with the outgoing server setttings. All the passwords are lost whether imap, pop (Ionos), hotmail or yahoo. Is there a way to clear out my profile or is this a problem with this T release. it did not happen until about 1-2 months ago. My profile is on a local NAS. Generally T seems to be quite unstable ; I get Not Responding too often.. Thanks

Suddenly unable to send any emails. Able to receive / read. In Charter / Spectrum able to send. Port numbers are correct (143) for Incoming & (25) for Outgoing SMTP. Did try to change Outgoing Port to 587 per one of your posts. Didn't work. This is error message I get.

After creating a IMAP email setup instead of the old pop3, I want to move my old folders over to the IMAP setup, but when clicking 'copy to', 'move to' or just simply dragging them nothing happens. No errors no nothing.

Whats wrong ?

-Kim

With the recent update on Thunderbird, and installing it on a new computer, I can't seem to locate where the setting is that shows "Read" after so many seconds of viewing. Could someone redirect me? Thanks so very much!

when clicking an email link this is shown

"Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile."

How do I make Thunderbird instead open a new email?

This is on Fedora

Thunderbird updated to 115.10.1 (32-bit) and I cannot see any emails now. I use View > Folders > All. If I run a search, TB lists the emails. Have tried opening in Troubleshoot mode but still same, no emails nor inboxes. Windows Security Ransomware turned off for preparing for maintenance prior to TB updating itself. How should I go about fixing issue?

Windows 11, 64 bit Addons: Cardbook, Provider for Google Calendar

duplicate of /questions/1445549 thread.

Buonasera, stamattina non funzionando le mail in arrivo in Thundebird, ho riparato la cartella a seguito di un messaggio arrivato dal vostro portale dove mi diceva: spazio archiviazione terminato. Effettuata la procedura i messaggi in entrata hanno iniziato a funzionare regolarmente ma mi sono accorto che tutte le mail nella cartella posta in arrivo erano prive di testo. Cosa può esser successo e se è possibile ripristinare, grazie mille per un vostra risposta. Vi lascio in allegato un'immagine come campione. Cordiali saluti, Gianfranco

Since my latest Linuxmint update (Linux Mint 21.2 Victoria base: Ubuntu 22.04 jammy), when I right click on an email address NOTHING happens. It ALL versions before 115.5.0 when I right clicked on an email address I had options like: I could copy email address OR even start to new email with that email address as the recipient + Others. Is this deliberate in 115.5.0? or is there a way I can get it back?

thanks Sam

I have had message filters set up for a long time. Recently I tried to make some changes (adding one filter, deleting others, changing the response). I find that if I close Thunderbird and reopen it, all my changes are gone! How can I get the filter changes to stick?

I've provided all of the other data, no problem. But the <Your login> field has only "YOURDOMAIN\yourusername" in it as a format hint. The field carries an Info symbol, but it's greyed out.

There are many possible domains, e.g. microsoft.com, office365.com, outlook.com, each with possible 3LDs, and the domain-name of the organisation that provides my account.

The most obvious (MYORGDOMAIN\Roger.Clarke) gets the error-message: > Authentication failed. Please check the username and password. (I checked, and they're the same as I use for a webmail login there).

Leaving it empty gets this error-message: > Unable to log in at server. Probably wrong configuration, username or password. (That about covers the possibilities then ...).

Hi. I have tried to set up my gmail email addresses in Thunderbird without success. When I reach the end of the process I get a window asking me to log into gmail but when I try to do that I get an error message. I have tried some of the fixes. Not entering my password, turning off 2 factor authentication, manual set up, but I still get the error message. Any help would be much appreciated. Thanks.

I was forced to change the passwords on two of my accounts, one on yahoo.com and other on gmail.com after which they stopped working in Thunderbird after entering the new passwords. I completely deleted the accounts thinking I could add them again and they'd work.

They both act the same, so I'll just mention Yahoo. I successfully log in on the OAuth2 popup but Thunderbird returns the errors on yellow. I know the logging in is successful because I get a confirmation on my backup email "Your Yahoo account bogdan253 was used to sign in to a new third party application on thunderbird."

Gmail acts the same. Thunderbird is unusable at this moment, I will have to find another app if I can't fix this.

Do some corruption problems on my PC I recently reinstalled Windows (via MS cloud install option) and the reinstalled Thunderbird - currently running 115.10.1 (64-bit)

There were a few problems so I just did a clean install. IMAP and imported a copy of my address book.

Now on outgoing emails, occasionally the URL are highlighted a different color. I have confirmed that this is what the recipients are doing. I can't find any option that would indicate that I have asked for the URL to have a different color. I have tried light/dark/system default mode on the color theme and I can't see a difference...

Granted, it is not critical, but it is completely annoying. See the attached image.

TB no longer will start. It just hangs and when I go to it on my Mac I see a spinning disk. That never changes and eventually, after hours, I must force quit and report it to Apple. I receive no messages or error codes.

I lost power to my PC when Thunderbird was running (thanks electrician who tripped the whole fusebox!). Since then despite everything I have tried Thunderbird will not open my mailbox. I get the screen 'Set Up Your Existing Email Address' shown in the screenshot. I can see my address book.

I have tried creating a new profile, copying across all the data from the profile in use until yesterday and changing the profiles.ini to point to the new profile. If I start using the profile manager (thunderbird -p) it shows the new profile but if I click it then I still get the same screen shown in the screenshot.

After looking at other support pages I tried deleting the .lock files and rebooting, still the same.

Under the troubleshooting information I can see the correct profile folder and open it, if I click about::profiles then the correct profile is in use.

It is a bit more complicated as I had the profile on a NAS drive but I have created a new profile on the PC and copied all the data in the profile directory to the local profile folder. Still the same results.

Edited: After trying a couple of other things - import into a new profile from the currant one, still same results, and changing the installs.ini file to match the profiles.ini one, also same results, I have uploaded a couple more pictures after looking again at other support questions.

I am on version 115.10.1 (32-bit)

Thanks for any help.

I have several email addresses all on my own website and all with identical setup at the server end. I just added two new ones to TB and they vanish when TB restarts. I've installed them a couple of times, they auto install perfectly, but they keep vanishing.

I've checked that all the mail servers and ports etc are the same as on the ones that work OK. So I'm assuming that the problem is some kind of generic problem with cache / profile corruption etc etc. Assuming that is the case, what kind of generic cleanup fixes should I try please?

Many thanks.

Cox.com has decided to no longer have their own email server and switched their accounts to yahoo. I can read my email directly on Yahoo, but can't get their imap to work. I changed the imap and smtp settings to yahoo. Also, the email login has changed and I changed that in Thunderbird. With Cox, the login was just "username" and now it is "username@cox.net". When I made these changes in the account settings, my email account has disappeared from the inbox, but it is still in account settings. I am using a unified inbox with several accounts.

Cox will not help me with this, and I have been on hold with yahoo for an hour with no response. I have been messing with this for two days so I hope you can help me.

I have thunderbird backed up from appdata\roaming\thunderbird. I need to restore my corrupted mail app. How do I do it with Windows 10 and version 115.10.1? Can I simply copy saved Thunderbird over the corrupted one? Thank you. -- Don McGee

I believe this to be a new situation; I've just noticed it for the first time in the couple of years since I switched email clients.

I'm running three POP/SMTP email accounts under Thunderbird. Aside from my Gmail 'primary' account, there's an msn account and a business one too. I use the 'unified view' mode for inbox, sent, trash, etc. and seldom defer to individual account windows unless searching for something.

I can't figure out why my primary (Gmail) account is showing up again, in boldface blue no less, just below Trash and above Local Folders. I feel I must have flipped a switch somewhere, but can't locate it to turn it off. Any ideas?

I have Thunderbird set up on PC and a Laptop. On the PC I have version 115.9 installed and the Laptop (which is a more recent purchase) version 115.10.

On the PC I can easily sort by "date", "correspondent", etc as there are click buttons at the top of each column but these do not appear in version 115.10.

I have looked at all the view menu options and cannot see that anything will help to change this. Was this functionality removed in the upgrade or is there a way to alter the view settings? The screen shot is from the Laptop.

TIA