Viser spørgsmål med mærket: Vis alle spørgsmål
  • Arkiveret

cmd+1 with CZ key layout zooms instead of switching to 1st tab

cmd+numbers on alphanumeric keys should switch to respective tab (cmd+1 to 1st tab, cmd+5 to fifth...). With CZ keyboard layout on MacOS, cmd+1 does NOT switch to first t… (læs mere)

cmd+numbers on alphanumeric keys should switch to respective tab (cmd+1 to 1st tab, cmd+5 to fifth...). With CZ keyboard layout on MacOS, cmd+1 does NOT switch to first tab, it Zooms In instead. No other browser (Edge, Safari, Opera, Orion) exhibits this behaviour. Other numbers work as expected.

FF 98.0.2 on Monterey 12.2.1.

How do I fix this? Thanks.

Asked by jfiala for 10 måneder siden

Last reply by jonzn4SUSE for 10 måneder siden

  • Arkiveret

Add-on was at the top of the right-click menu, but now it's been moved down.

I currently have this add-on installed. It allows you to you highlight certain text, then right click and open up a link to Wiktionary in another tab. Up until a few minu… (læs mere)

I currently have this add-on installed. It allows you to you highlight certain text, then right click and open up a link to Wiktionary in another tab. Up until a few minutes ago, this menu item was at the very top of the list (i.e. above "undo" and all the rest), but now it's been moved down with all the other add-ons. Image for further clarity.

The add-on hasn't been updated in 6 years, so it's certainly not that. I don't recall doing anything to make it change, but before this, it had been at the top of the menu ever since I added it maybe 2 years ago. Is there any potential way to restore this functionality? The fact that it appeared at the very top of the menu might have been a bug, but if that's the case, it was certainly a convenient one.

Anyway, I'll be looking forward to hearing from you fine folks in this community.

Asked by WonkySplonky for 7 måneder siden

Last reply by jscher2000 - Support Volunteer for 7 måneder siden

New page display - to show Google search bar and recent web sites

I used to get a display in the middle of a "New Page" with Firefox - recent revisions have removed that and I only get a Google search bar at top of new page. Help is ap… (læs mere)

I used to get a display in the middle of a "New Page" with Firefox - recent revisions have removed that and I only get a Google search bar at top of new page. Help is appreciated. What I am looking for is displayed in images from my Chrome browser - similar, but not like the way Firefox displayed it.

Asked by iledwards for 3 måneder siden

Last reply by Terry for 3 måneder siden

MS word will only prompt for download and not open

I download many pdf and Word files each day for marking. Opening pdf files in Adobe Reader works automatically OK, but Word files no. This archived question gives a link … (læs mere)

I download many pdf and Word files each day for marking. Opening pdf files in Adobe Reader works automatically OK, but Word files no. This archived question gives a link to an answer that does not work. "If Firefox does not have a set download action for a type of file, Firefox will save the file by default. If you select Always Open Similar Files in the Downloads panel right-click context menu for the file, (see below) a new Content Type and Action entry will be added to the General panel Applications section of Firefox settings." I went through the Always Open step, but no "Content Type and Action entry" was added.

Judging by the questions in Firefox and more widely, many people are having the same problem. Why cannot the industry standard file types be added to that list by default?

When I have to reinstall Firefox (it is needed frequently), I have to edit/delete a number of unwanted browser search tools. This principle could be used for the list of automatically opened file types as part of Firefox default settings.

Asked by cvhorie for 2 måneder siden

The confirmation for whether to open a link in its default container has disappeared - how can I turn it back on?

Pretend I have examplesite.com set to default to my "example sites" container. If I opened a "personal sites" container tab and typed in examplesite.com, it would ask me … (læs mere)

Pretend I have examplesite.com set to default to my "example sites" container.

If I opened a "personal sites" container tab and typed in examplesite.com, it would ask me if I want to open it in that container or the default container.

It no longer does this, but instead just changes it to the default container. I don't know if it is because of an update or something else. I've looking in the settings, but can't find anything about this.

I frequently open certain sites in multiple containers, but still the majority of the usage is in a single container, so I have them set to a default. Currently, however, I have no way to open these sites in anything but their default container. I am using Firefox Developer Edition 107.0b9 (64-bit), but I also see it in regular Firefox 106.0.3 (64-bit).

Hopefully there is a configuration that I can set somewhere! Thanks :)

Asked by firefox2082 for 2 måneder siden

Setting home page

Cannot set my home page The instruction in help does not match my browser How is this possible? Home tab in settings doesn't do anything Drop and dragging icon to home bu… (læs mere)

Cannot set my home page The instruction in help does not match my browser How is this possible? Home tab in settings doesn't do anything Drop and dragging icon to home button does not work either ! Having to sign up for an account to get help pisses me off too

Asked by dncrisman 3 uger siden

Last reply by cor-el 3 uger siden

How to disable the "snap to grid" function when dragging pictures to desktop.

How do I stop the "snap to grid" function when dragging pictures from the window to the desktop on Mac? whenever I drag a Picture to the desktop, it's like the "snap to g… (læs mere)

How do I stop the "snap to grid" function when dragging pictures from the window to the desktop on Mac? whenever I drag a Picture to the desktop, it's like the "snap to grid" option on the computer is on. The pictures won't stack if i drag them to the exact same place. Ive checked every preference option on both the Mac computer and the Firefox settings but there is nothing about disabling it. The "snap to grid" function is disabled on the computer itself and images will stack if dragged from another browser like Chrome. It only does it with Firefox. Any help would be appreciated.

Asked by thecarsonmajor 3 uger siden

Phantom Ad-Blocker

I am beginning to be asked by websites to turn-off ad-blocker. Just realized that Firefox has an ad-blocker embedded in its software. When I go to Add-ons & Extension… (læs mere)

I am beginning to be asked by websites to turn-off ad-blocker. Just realized that Firefox has an ad-blocker embedded in its software. When I go to Add-ons & Extensions, Ad-Blocker is not listed so that I can turn it off. Suggestions on finding ad-blocker and having the ability to turn it off and on would be appreciated. Thanks

Asked by leemann12 3 uger siden

Last reply by cor-el 3 uger siden

Bookmarks

I have tried many recommendations to control the bookmark spacing in firefox 108.0.2. I prefer to have single spacing, which is much more convenient than the wider spaci… (læs mere)

I have tried many recommendations to control the bookmark spacing in firefox 108.0.2. I prefer to have single spacing, which is much more convenient than the wider spacing which now exists. Although many "workarounds" exist, none work to change this problem in the latest version. Why is this problem so difficult to resolve? It worked before and I trusted that it would work again after updating from the last version where it did work. This change is very disappointing.


Thanks George

I looked through the treads below, but could not see where any rules block any changes from occurring.

Asked by alexnwba 2 uger siden

Last reply by Terry 2 uger siden

Keybinds

How do I get rid of keybinds or at least change them it's really annoying when I'm working on stuff and i try to close one tab and then i close the entire window by accid… (læs mere)

How do I get rid of keybinds or at least change them it's really annoying when I'm working on stuff and i try to close one tab and then i close the entire window by accident by fat fingering shift.

Asked by 07ricardov 2 uger siden

Last reply by Dropa 2 uger siden

How to disable menu popping up when I press ALT + T ?

How to disable menu popping up when I press ALT + T ? I want to assign Alt + T for some extension. I set ui.key.menuAccessKeyFocuses to false but it isn't enough. When I … (læs mere)

How to disable menu popping up when I press ALT + T ?

I want to assign Alt + T for some extension. I set ui.key.menuAccessKeyFocuses to false but it isn't enough. When I press Alt + T the Tools section in menu pops up! Absolutely annoying.

Asked by Orbb 2 uger siden

Last reply by cor-el 2 uger siden

Firefox DevTools - restore F12 shortcut

How can I get my F12 shortcut to open DevTools? From looking at https://firefox-source-docs.mozilla.org/devtools-user/keyboard_shortcuts/index.html it seems that for some… (læs mere)

How can I get my F12 shortcut to open DevTools?

From looking at https://firefox-source-docs.mozilla.org/devtools-user/keyboard_shortcuts/index.html it seems that for some reason unclear to me the first opening must be manual or using this weird keyboard combination.

Yes, it is an almost exact opposite of https://support.mozilla.org/en-US/questions/1080173

I admit that it is possible that something went wrong with general OS, not sure how to diagnose it. ctrl+shift+i still works for now.

Asked by matkoniecz 2 uger siden

Last reply by cor-el 2 uger siden

When printing, how do I change the default setting for Print Scale from 100 (by default) to another number (ex 50)?

Hi and thanks for your time. When printing, How can I change the default SCALE setting from 100% to 50% (or whatever)? I often print shipping labels for my online store. … (læs mere)

Hi and thanks for your time. When printing, How can I change the default SCALE setting from 100% to 50% (or whatever)? I often print shipping labels for my online store. My bubble mailers are small so I always have to change the print scale to 50% (instead of Fit to Page Width) It's not a crisis but just annoying. I would like to customize my default setting for print scale to 50 so I don't need to type in "50" every time i use it. Is this possible? I suspect it's buried somewhere behind the scenes in the programmers special access?

Thank you, Dan PS: I am NOT a programmer OR technical minded so please dumb it down for me, if you can.

Asked by doxien71 2 uger siden

Last reply by jscher2000 - Support Volunteer 2 uger siden

Is there an extension that will STOP FireFox from asking me "allow this extension to run in private windows?"

Every time I install an extension, FireFox asks me if I want to "allow this extension to run in private windows?" The answer is YES, the answer has always been yes, and i… (læs mere)

Every time I install an extension, FireFox asks me if I want to "allow this extension to run in private windows?" The answer is YES, the answer has always been yes, and it always WILL BE YES, so how do I set it to default on yes?

I also need an extension to block DEVELOPER POP-UP windows from newly installed or updated extensions. I have 4 pop-up blockers installed, but they all seem to bypass it.

Asked by albertmonaco 2 uger siden

Last reply by James 2 uger siden

  • Løst

Enable title bar in profile

Hi, I'm on an a pretty old Linux Xubuntu pc, but with the latest FireFox. In a profile I regularity use I unchecked the Title Bar checkbox in the Customize Toolbar screen… (læs mere)

Hi,

I'm on an a pretty old Linux Xubuntu pc, but with the latest FireFox. In a profile I regularity use I unchecked the Title Bar checkbox in the Customize Toolbar screen, but then FF crashed and I can't get that profile opened again. I can still open other profiles (because I still use the old-fashioned profile manager and don't need to go into about:profiles), but when I open that particular profile, after some hangups, I only get FF in the taskbar, but no screen opens so I can't change the setting back again.

Is there a file in the profile folder I can edit or something like that to enable the Title Bar option again to see if that profile wants to open normally again?

In case that's not possible I can copy that particular profile into a new profile, but then I will undoubtedly also copy the title bar setting, which I don't want. So can I copy the profile except for the one file with that setting and use the file from the new profile instead? What file would that than be?

I hope someone can help me out. Thanks in advance for any help.

Asked by niebelungen 2 uger siden

Answered by cor-el 2 uger siden