• Riješeno
  • Arhivirano

Is there an msi available for v59

We are currently updating our version of Firefox to v 59.0.2 Is there an msi available and whitepaper detailing custom install parameters? ie. Set homepage, silent instal… (pročitajte više)

We are currently updating our version of Firefox to v 59.0.2 Is there an msi available and whitepaper detailing custom install parameters? ie. Set homepage, silent install, disable auto update, etc?

Asked by DHeinz prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

I'm using FireFox 60.0. I set up the GPO and applied it to my computer but it is not changing the homepage. Help!

I use sync on all computers I use Firefox. For my work PC, I am expecting that Group Policy will change that computer to see the company configured homepage. (my home … (pročitajte više)

I use sync on all computers I use Firefox. For my work PC, I am expecting that Group Policy will change that computer to see the company configured homepage. (my home PC will see the homepage I have configured in my personal settings because it is not part of domain where GPO's exist.) The problem is that the GPO settings are not working. It is showing my personal homepage and the GPO is not taking effect. Any advice as to why the GPO is not working? I am using the recent release that says Group Policy is supported. ADMX files are in place and home page is configured.

Asked by wolverine6879 prije 3 godina

Answered by philipp prije 3 godina

  • Riješeno
  • Arhivirano

How do I find the ID of an extension?

Attempting to deploy an extension via GPO and make it so that it cannot be disabled or removed. I cannot seem to find the ID of a certain extension. Policy = Prevent exte… (pročitajte više)

Attempting to deploy an extension via GPO and make it so that it cannot be disabled or removed. I cannot seem to find the ID of a certain extension.

Policy = Prevent extensions from being disabled or removed. I enabled the policy and added as many options of the ID as I could find. Not sure the right formatting or address to put. I tried: {93fc56d8-0594-4975-8753-c6d1877053ac} 93fc56d8-0594-4975-8753-c6d1877053ac 93fc56d8-0594-4975-8753-c6d1877053ac@mozilla.org

Nothing worked. Firefox 60 ESR Windows 10 1803

Asked by becauseimbatman prije 3 godina

Answered by cor-el prije 3 godina

  • Riješeno
  • Arhivirano

installed latest non-ESR version of Firefox over ERS, all bookmarks are gone

An application requested the latest version of Firefox. I installed it. I found I had two versions of Firefox installed. One was ESR. The latest version of Firefox had bo… (pročitajte više)

An application requested the latest version of Firefox. I installed it. I found I had two versions of Firefox installed. One was ESR. The latest version of Firefox had bookmarks. The ESR version did not have bookmarks. I checked with IT support and found I needed to uninstalled the latest non-ESR version. Now I have no bookmarks. It doesn't matter how I try and import them, they do not display in the bookmarks library. When I'm on a website that I know is bookmarked, the star turns blue. The bookmarks toolbar has nothing on it. They must be somewhere, but there is a disconnect. Without bookmarks, I cannot continue using Firefox.

Asked by julielynbloom prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

What is the correct URLs to set Google as the default search provider and make it permanent?

I am attempting to make Google the default search engine for Firefox 60 ESR. I am trying User Configuration. Default Search Engine = Google (not sure if just put a random… (pročitajte više)

I am attempting to make Google the default search engine for Firefox 60 ESR.

I am trying User Configuration.

Default Search Engine = Google (not sure if just put a random name or the actual URL) Prevent Search Engine Installs = Enabled Search Engine One: - Name = Google - URL Template = {google:baseURL}suggest?q={searchTerms} - Method = GET

System: Win10 1803

Asked by becauseimbatman prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Zaključano
  • Arhivirano

Narrator only reads the first paragraph

In the reader mode, when I click the "Narrate" and play, only first paragraph will be read. The wave icon is moving, a speaker shows on tab, but no more voice came out. I… (pročitajte više)

In the reader mode, when I click the "Narrate" and play, only first paragraph will be read. The wave icon is moving, a speaker shows on tab, but no more voice came out. It looks like a crash but happens all the time.

Also, I tried chirpy and got same problem. Is there some setting wrong on my browser?

The MacOS version is 10.13.4; Firefox version 52.8.0 (64-bit) on ESR update channel.

I mistakenly posted the same question on the wrong forum before. Here is the link: https://support.mozilla.org/en-US/questions/1217053. Hope it helps. Thanks!

Asked by ElecDog prije 3 godina

Last reply by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

Can we please have a group policy setting to customize the new tab page?

So far ESR 60 and the group policy settings are great, but there are no settings for the new tab page. In an educational environment (k-12), many of these Top Sites (Fac… (pročitajte više)

So far ESR 60 and the group policy settings are great, but there are no settings for the new tab page. In an educational environment (k-12), many of these Top Sites (Facebook, Reddit, etc) and Recommended by Pocket articles (video game related, etc) are not appropriate.

I know that I can disable the entire New Tab page with a config file (which is how we did it with previous versions), but with the introduction of Group Policies, I'd like to be able to move away from this and handle everything in the GPO.

Asked by WCPSS-Software prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

GPO Integrated_authentication not applying to prefs.js

I've configured the GPO to enable NTLM authentication for a specific site: Computer Configuration --> Policies --> Administrative Templates --> Mozilla --> Fi… (pročitajte više)

I've configured the GPO to enable NTLM authentication for a specific site: Computer Configuration --> Policies --> Administrative Templates --> Mozilla --> Firefox --> Authentication --> NTLM

I apply this GPO to the local Win 10 Pro machine with Firefox 60 installed - GPUPDATE /FORCE

when I check HKLM --> SOFTWARE --> POLICIES --> MOZILLA --> FIREFOX --> AUTHENTICATION --> NTLM I see the site I added via GPO

however when I check the prefs.js file I cannot see user_pref("network.automatic-ntlm-auth.trusted-uris")

Asked by barnacle prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

Firefox GPO and Firefox Account saved logins and passwords

Hi, I am testing the "adml/admx" file for GPO and I have noticed a problem with the "Firefox Account" when the GPO are enabled. I am on a Windows 7 x64 with Firefox 60.0.… (pročitajte više)

Hi, I am testing the "adml/admx" file for GPO and I have noticed a problem with the "Firefox Account" when the GPO are enabled. I am on a Windows 7 x64 with Firefox 60.0.1 x64 machine. When GPO are NOT set/active, I have access to all my synchronized logins and passwords from my Firefox Account, but when GPO are applied, I lose all my logins and passwords. Is there a restriction with Firefox synch when GPO are enabled? Is this issue due to the fact that I am using the French version of Firefox on client PC? Thanks a lot. Nicky

Asked by Nicky prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

templates on Win 2012r2 not working

I've applied the admx templates to the Sysvol on our Win Server 2012r2 environment & I've created a GPO to allow NTLM authentication to our intranet sites. However w… (pročitajte više)

I've applied the admx templates to the Sysvol on our Win Server 2012r2 environment & I've created a GPO to allow NTLM authentication to our intranet sites. However when I deploy the GPO I do not see the site in about:config network.automatic-ntlm-auth.trusted-uris

using gpresult /r I can see that the GPO is getting applied on our test machine.

attached is an image (first image) of the Firefox templates when added to the domain controller (Win 2012r2) -

I tried on another test Domain controller (this time Win 2016) and noticed that the templates look different. When applied to the Win2012r2 DC they seem to have been placed under 'Extra Registry Settings' (see first image) however when I placed them on my 2016 box, they were assigned to a different category (see second image).

Asked by barnacle prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

Auto enable extensions after silent installation of Mozilla Firefox

Hello, I'm trying to customize Mozilla ESR Firefox configuration for silent deployment. I need include some language packs and implement automatically changing UI languag… (pročitajte više)

Hello,

I'm trying to customize Mozilla ESR Firefox configuration for silent deployment. I need include some language packs and implement automatically changing UI language depending on OS language.

I have copied needful .xpi languages packs to unziped_installer\core\browser\extensions\. It installs with Firefox and visible on tab "Languages" in "about:addons".

Also, I have found parameter, which can change UI language - "intl.locale.requested". Everything works fine, but I have one problem: Installed extensions is disabled after installation.

Also, environment can exist Mozilla Firefox profiles in appdata, which I should not remove.

Could you please advise me how I can enable these extensions after installation or first user runing with help config/preferences or maybe there is some other solution?

Thanks in advance.

Asked by darvis994 prije 3 godina

Answered by darvis994 prije 3 godina

  • Riješeno
  • Arhivirano

How I can configure trusted URL sites by Group Policy?

I download Firefox 60. Download ADMX, but I can't found options similar trusted.uris how from about:config. I found only: Authentication_SPNEGO, Authentication_Delegated,… (pročitajte više)

I download Firefox 60. Download ADMX, but I can't found options similar trusted.uris how from about:config. I found only: Authentication_SPNEGO, Authentication_Delegated, Authentication_NTLM.

If I insert links of my sites LDAP authorization in these settings, then the browser, when I try to open them, will still request a login with a password If I manual add ulr to about:config -> trusted:uris - Then everything is successfully authorized

Asked by strelkovandrey prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

Upgrade from ESR 38 to ESR 60 loses bookmarks

Is there anyway to script updating the places.sqlite database to fix this problem? We are trying to upgrade to ESR60 everywhere, but all users are going to lose their boo… (pročitajte više)

Is there anyway to script updating the places.sqlite database to fix this problem? We are trying to upgrade to ESR60 everywhere, but all users are going to lose their bookmarks as things stand.

Asked by darryl82 prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

How to deploy handlers.json file to all new profiles?

I edited a handlers.json file for our users that I would like to push out for all new firefox installs. I tried placing this file in the "defaults" folder in my firefox … (pročitajte više)

I edited a handlers.json file for our users that I would like to push out for all new firefox installs. I tried placing this file in the "defaults" folder in my firefox directory, but it doesn't appear to be correctly copying over to any new profile made. If I manually copy the handlers.json file to the new profile folder, I do see the changes reflected.

Where do I need to place this file in order to push it out? I tried <firefox>/defaults, <firefox>/defaults/prefs, <firefox>/browser/defaults and none appeared to work. I did paste my code contents into a linter to verify there were no errors.

Thanks.

Asked by Solaire prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

Firefox 60 ESR (win 32/64) writes registry full of "targetIDs"

The new Firefox 60 ESR (x86 and x64) does strange things now. Before versions write something like: "Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Clients\StartMenuInternet\Firefo… (pročitajte više)

The new Firefox 60 ESR (x86 and x64) does strange things now. Before versions write something like: "Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Clients\StartMenuInternet\Firefox" "Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Classes\FirefoxHTML"

The new version writes everything full with its targetIDs: "Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Clients\StartMenuInternet\Firefox-3EF782B73E4DE8EA" "Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Classes\FirefoxHTML-3EF782B73E4DE8EA\shell\open\command" with Entry "Command" -> "xR([A*739AAQ}%xS^9-!>1PP%X~-.q8]xGk0a)VCS -osint -url "%1""

Or another one: in 60.0.0ESR [HKEY_LOCAL_MACHINE\SOFTWARE\RegisteredApplications] -> "Firefox-3EF782B73E4DE8EA"="Software\\Clients\\StartMenuInternet\\Firefox-3EF782B73E4DE8EA\\Capabilities"

in 52.8.0ESR [HKEY_LOCAL_MACHINE\SOFTWARE\RegisteredApplications] -> "Firefox"="Software\\Clients\\StartMenuInternet\\Firefox.exe\\Capabilities"

..and so on, I can list more if needed.

I think something really strange happens here. I tested it on different computers with Windows 7 32 and 64bit and Windows 10 64bit.

Is this the real intention behind the new version or will it be fixed in the installer?

Asked by ronronron prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

Add in Enterprise CA

Is it possible to add in an Enterprise CA certificate chain to a FF installer for distribution? I have manually added an Enterprise CA chain to FFv60 via Options > Pri… (pročitajte više)

Is it possible to add in an Enterprise CA certificate chain to a FF installer for distribution? I have manually added an Enterprise CA chain to FFv60 via Options > Privacy & Security > View Certificates > Import. However, I would like to push this modification out to all Enterprise workstations.

Any assistance you can provide is appreciated.

Asked by mmai prije 3 godina

Answered by Mike Kaply prije 3 godina

  • Riješeno
  • Arhivirano

Legacy plug-in support on Firefox for Enterprise

Hi, I am looking for a newer version of Mozilla Firefox for Enterprise that supports legacy plug-ins. At my work, we use Java 6 31 for Documentum and Java 8 101 to suppor… (pročitajte više)

Hi,

I am looking for a newer version of Mozilla Firefox for Enterprise that supports legacy plug-ins. At my work, we use Java 6 31 for Documentum and Java 8 101 to support our Oracle based applications. We currently use Firefox v54 to retain plug-in support. Is there a newer enterprise version we can use and retain support for these business critical applications?

Thanks, Brandon

Asked by BGiesel prije 3 godina

Answered by James prije 3 godina

  • Riješeno
  • Arhivirano

Is there a comprehensive list of differences between RR & ESR

Looking to deploy Firefox using Group Policy in Windows. Should I be using Rapid Release or ESR? I've read a lot on this site but it's still not clear with which I shou… (pročitajte više)

Looking to deploy Firefox using Group Policy in Windows. Should I be using Rapid Release or ESR? I've read a lot on this site but it's still not clear with which I should be using & why. As far as simply installing it through Group Policy, are there differences between the 2?

Asked by Zillafan prije 3 godina

Answered by Wesley Branton prije 3 godina