Prikaz označenih pitanja: Prikaži sva pitanja

Some websites "break out" of multi-account containers

I've been using multi-account containers for a few months now, and loving it. I use the no-container firefox for work, since clicking on links in other apps goes straight… (pročitajte više)

I've been using multi-account containers for a few months now, and loving it. I use the no-container firefox for work, since clicking on links in other apps goes straight there. So I have a personal container, financial container, shopping, and media.

The problem usually occurs with financial sites, that have a lot of redirects in their login page. For my privacy, I won't list which ones, but they are major financial institutions with fairly "slick" web pages (slick as in very annoying and overly complicated...).

Even setting "always open in container tab" doesn't seem to do the trick. I get stuck in a loop where the login page fires, then it seems to "break out" of the container tab, before redirecting back to the login page. The tab color goes from green to regular grey and back to green. Any ideas on how to fix this? On some pages I'm able to set the "always open in container tab" option on the intermediate pages, but others I cannot. Seems like when the login goes through a proxy or something I can't make it work. Any ideas?

Asked by smiling_corvidae prije 2 mjeseci

JAWS Screen reader not reading the content from popup model in Firefox ( intermittent issue )

Dear Team, We would require some clarification or support for the below issue encountered while running JAWS on different browsers Problem Statement: Popup Content not re… (pročitajte više)

Dear Team,

We would require some clarification or support for the below issue encountered while running JAWS on different browsers

Problem Statement: Popup Content not read in FireFox Browser

  • JAWS screen reader (version 2022) works intermittently on FIREFOX version 98.0.2 ( 64-bit), i.e. Sometimes it reads the content from the popup screen and after a couple of attempts it doesn't read the content at all.
  • JAWS reader works properly with Chrome and Edge browser.

Request you to kindly guide us on getting the required support for the above mentioned issue. Are there any limitations or issues encountered in JAWS Screen reader tool.

Asked by meamitnair20 prije 2 mjeseci

Multi-Account Containers - "Always Open This Site in" by URL vs domain alone

I'd like to open specific site pages in a specific container and also allow other than those specific site pages to open in any container. Assigning containers by deep-l… (pročitajte više)

I'd like to open specific site pages in a specific container and also allow other than those specific site pages to open in any container. Assigning containers by deep-link or :[port] would help with web dev and content authoring. e.g.:

WordPress sites:

This helps me to see updates as an unauthenticated user or as another authorized user assigned another role.

Thanks for your time and assistance. Please let me know if more info from me helps responding to this question.

Asked by smcnally prije 2 mjeseci

Firefox 99 os/system print dialog

Hi, how do we set Firefox 99 to use the os/system print dialog? We are using Linux. In Firefox 97/98 we could change these settings in about:config: widget.use-xdg-deskto… (pročitajte više)

Hi, how do we set Firefox 99 to use the os/system print dialog?

We are using Linux.

In Firefox 97/98 we could change these settings in about:config: widget.use-xdg-desktop-portal.file-picker = 1 widget.use-xdg-desktop-portal.mime-handler = 1 widget.use-xdg-desktop-portal.print = 1 widget.use-xdg-desktop-portal.settings = 1

Then we could get the os/system print dialog by clicking the "Print using the system dialog..." in the Firefox print preview.

In Firefox 99, widget.use-xdg-desktop-portal.print is gone. No matter what we set the other widget.use-xdg-desktop-portal.* keys to, we can only get the Firefox print dialog, when clicking the "Print using the system dialog..." in the Firefox print preview. We do not get the os/system print dialog.

So, how is that done now?

Thanks for your time :o)

Asked by johnny1000 prije 2 mjeseci

Container multiplication

I am running into a issue that's been plaguing for months now. After erasing some of the default multi-account containers on one my sync'd computers I am now dealing with… (pročitajte više)

I am running into a issue that's been plaguing for months now. After erasing some of the default multi-account containers on one my sync'd computers I am now dealing with, seemingly random container multiplication that I don't know how to make them stop.

As soon as this issue appears on one of my computers that issue propagates to the the other computers that are sync'd

Asked by melvin.aguirre prije 2 mjeseci

Save to PDF not being removed from Print Preview

Hi, I have issues clearing "Save to PDF" from FireFox from the print preview. My company uses Firefox ESR for our Linux workstations. I updated the about:config to dis… (pročitajte više)

Hi,

I have issues clearing "Save to PDF" from FireFox from the print preview. My company uses Firefox ESR for our Linux workstations.

I updated the about:config to disable the print options and still no luck. I even set the ~/.mozilla/firefox/*.default/prefs.js to following:

lockPref("print.save_as_pdf.internal_destinations.enable", false); lockPref("print.save_as_pdf.links.enabled", false); lockPref("print.save_print_settings", false);

I removed print_printer which had Mozilla Save to PDF

Nothing seems to remove the "Save to PDF". A liability for my company. Even went to about:support and clicked on "Clear saved Print Settings" and still nothing.

Any suggestions?

Asked by rigomez88 prije 2 mjeseci

system gone

Hi, My system was shut down, i had to reinstall an older program, I'm using Linux Ubuntu, at the beginning it said this was 20.04, the disk I used is 18.04 I'm unsure h… (pročitajte više)

Hi, My system was shut down, i had to reinstall an older program, I'm using Linux Ubuntu, at the beginning it said this was 20.04, the disk I used is 18.04 I'm unsure how to get my Thunderbird mail running, I need to contact my cousin, I just tried to email him but the STMP is not set up

Asked by chelle prije 2 mjeseci

Does Firefox has an option like --app from google-chrome?

I use google-chrome with the --app option extensively in scripts on my Linux systems. Does Firefox has such a similar option? As a basic example: /opt/google/chrome/goog… (pročitajte više)

I use google-chrome with the --app option extensively in scripts on my Linux systems. Does Firefox has such a similar option?

As a basic example: /opt/google/chrome/google-chrome --app=https://docs.google.com/

Thanks

Asked by bernard.fay prije 1 mjeseci

Populated links change to a blue color which could be darker

When viewing a WikiSpecies page with many displayed links (e. g., https://species.wikimedia.org/wiki/Cymindidina), clicking an unopened (light-colored) link opens it to a… (pročitajte više)

When viewing a WikiSpecies page with many displayed links (e. g., https://species.wikimedia.org/wiki/Cymindidina), clicking an unopened (light-colored) link opens it to a new page and turns the link color to a dark blue. This display is controlled by the choice "Never" on the Firefox "Settings/Colors" page. The colors of links seem predetermined by "Never", which also enables unused links to be shown red.

Is there any way to change the clicked-on link color from a fairly dark blue to a darker one, while still showing unused, empty links as red?

My eyesight is not the best, and a darker blue "Never", if possible, would help me be sure I had visited a page.

Asked by jwill1000000 prije 1 mjeseci

32-bit Linux error: "undefined symbol: gdk_screen_get_monitor_scale_factor"

Hi, I used Firefox ESR on an old version of Puppy Linux (Slackware-based). It worked fine until about the end of November 2021, after which none of the updates worked. Th… (pročitajte više)

Hi,

I used Firefox ESR on an old version of Puppy Linux (Slackware-based). It worked fine until about the end of November 2021, after which none of the updates worked. The last working version is 78.15.0esr (32-bit).

On any later version, if I run Firefox from a console I get the following error message:

firefox: symbol lookup error: /opt/firefox/libxul.so: undefined symbol: gdk_screen_get_monitor_scale_factor

About the same time this happened, Tor browser (based on Firefox ESR) also stopped working, giving a similar error message.

Could anyone explain to me why this happens and if/how I might be able to fix it?

Thanks.

Asked by blip9 prije 1 mjeseci

How to autofocus the microphone permission dialog?

I was wondering if some websites ask for my microhpone permission, it can autofocus to the microhpone permission dialog of Firefox. Because I sometimes use the Tab key to… (pročitajte više)

I was wondering if some websites ask for my microhpone permission, it can autofocus to the microhpone permission dialog of Firefox.

Because I sometimes use the Tab key to browse the websites, when the websites ask, I have to: 1. Press Tab key to several times to first get to the Firefox Menu Bar. 2. Press directional key to choose the phone icon. 3. Press Enter key to enter in the permission dialog.

Thank you.

Asked by bunli prije 1 mjeseci

Sync Does NOT Work With Version 88.0 Ubuntu (Linux).. Original Version On Xtra-PC USB ThumbDrive Did !

Fix it so the FireFox browser Version 88.0 for Ubuntu (Linux) works AGAIN at saving website Login data using a Primary password via your 'FireFox Sync' advertisement (doc… (pročitajte više)

Fix it so the FireFox browser Version 88.0 for Ubuntu (Linux) works AGAIN at saving website Login data using a Primary password via your 'FireFox Sync' advertisement (documentation).

Asked by nm4dgdcs prije 1 mjeseci

Firefox: Unable to load module (PKCS11, DNIe)

Firefox is unable to load module I've been trying to setup a smartcard reading device, and I've gotten stuck twice on the same place. When it comes to configuring the Sec… (pročitajte više)

Firefox is unable to load module

I've been trying to setup a smartcard reading device, and I've gotten stuck twice on the same place.

When it comes to configuring the Security Device on Firefox, I can't access the .so file. Firefox merely shows the error "Alert: Unable to add module", but I've noticed that when I try to browse my files manually, trying to access the /usr directory returns an error (sometimes, I seem to not be able to get it consistently).

It also happens that the software I installed for the digital certificate tried to open an html with Firefox, which is located in /usr/share/, and Firefox doesn't seem to be able to load that either. It returns a "Can't open file".

Steps followed

  1. Open Firefox
  2. Settings → Privacy and Security → Security Devices → Load
  3. Insert path /usr/lib/libpkcs11-dnie.so and try to load (yes, I've checked that the file does actually exist)
  4. Receive Alert: Unable to add module error

Relevant information

   Ubuntu 22.04
   I'm on the latest snap version of Firefox: 100.0.1-1
   Trying to setup the digital certificate for my Spanish ID (DNIe)

Asked by jana.lauco prije 1 mjeseci

Strange accounts in auto complete history of saved account fields

like in [https://support.mozilla.org/en-US/que.../1358775|this] this article. I see stranger accounts in my browser saved session suggestions. I only use my ff account i… (pročitajte više)

like in [https://support.mozilla.org/en-US/que.../1358775|this] this article. I see stranger accounts in my browser saved session suggestions. I only use my ff account in my personal computers and i'm not share my computer with strangers & guests. (this does not mean no one used after i leaved a computer with resetting that computer). Rarely using my personal computer(s) in public networks.

Do you have any ideas why this is happening and how can i prevent ?

Asked by Murat prije 1 mjeseci

Thunderbird eMail misbehavior with messages read/unread status

My Thunderbird version 91.9.1 (64-bit) running on Ubuntu 4.15.0-180.189-generic 4.15.18 is exhibiting an annoying behavior, where previously "read" messages keep (randoml… (pročitajte više)

My Thunderbird version 91.9.1 (64-bit) running on Ubuntu 4.15.0-180.189-generic 4.15.18 is exhibiting an annoying behavior, where previously "read" messages keep (randomly) reverting back to "unread" status. I've already tried to "repair" my Inbox directory (which took over a week to rebuild while operating 24x7), but this problem still persists. I never had this problem before (even with my Inbox containing nearly 200K messages) until an unknown prior version upgrade of Thunderbird started to manifest this mis-behavior. I currently have 55K messages retained in my Inbox and am constantly reducing that by moving selected groups of messages into sub-directories separate from my Inbox.

Additionally, I've noticed that downloading of received (but "unread") messages appear to be taking much longer than before (hence the extraordinarily long time for "repair" to rebuild my Inbox directory?).

How can I recover normal (ie, stable) read/unread message status behavior, and accelerate received messages downloads?

Thanks!

Asked by billc1224 prije 3 sedmica

putty not launching in Firefox 100.0.2 (64-bit)

putty was working fine until i recently upgraded the system to 22.04 LTS.my final requirement is to launch putty from firefox page using telnet://x.x.x.x:1234. using the … (pročitajte više)

putty was working fine until i recently upgraded the system to 22.04 LTS.my final requirement is to launch putty from firefox page using telnet://x.x.x.x:1234. using the firefox application handler /usr/bin/putty. i have already set the handler, but its not launching. The putty version is 64-bit Unix (GTK + X11)

Asked by explorerhead prije 3 sedmica

launch custom profile from command line

Hi, If I launch this, all's fine: firefox.exe http://myurl I can view the site at http://myurl. However, I want to launch firefox with a specific profile, so I tried this… (pročitajte više)

Hi,

If I launch this, all's fine:

firefox.exe http://myurl

I can view the site at http://myurl.

However, I want to launch firefox with a specific profile, so I tried this:

firefox.exe -profile "C:\firefox\profile" http://myurl

I know that the profile's directory is loaded and written to because I created that dir with ONLY chrome/userchrome.css, and after launching firefox I can see a whole bunch of new files in there (eg. json files, sqlite files, etc.)

I can also see that it is also properly applying the settings in userchrome.css after I enabled toolkit.legacyUserProfileCustomizations.stylesheets.

However, http://myurl is not being opened at all. The culprit seems to be my userchrome.css which contains:

@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */

  1. openLocation, #urlbar-container, #CustomizeToolbarWindow, #toolbar-context-menu, #menubar-items {
display:none!important;

}

My intention is to open a URL and disable all other bells and whistles in the browser except the window and forward/back buttons (ie. I do not want kiosk mode).

How can I do that?

[EDIT]

It seems that #urlbar-container is the problem. If I set it to display:none!important, firefox will not open the URL I provide on the command line. Why? So, how can I tell firefox to open a URL but not allow the user to navigate elsewhere by typing it in the "urlbar"?

[EDIT 2]

This seems to do the trick:

@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */

  1. openLocation, #CustomizeToolbarWindow, #toolbar-context-menu,
  2. search-container, #personal-bookmarks, #menubar-items {
display:none!important;

}

  1. urlbar-container {
visibility:hidden;

}

However, I'd like to know if there are caveats.

BTW if Mozilla's support for userchrome.css will ever be dropped in the future what is a better way of doing the above? I certainly can't use kiosk mode and -app (app mode) is unavailable and will probably never will be.

Asked by vieri prije 3 sedmica