Firefox Community Forum

So i am using ReseourceOverride AddOn to debug a js library on standard install of firefox. This works by using the site as normal but resource override has instruction to replace request for the library on server with one requesting it from localhost. This used to work without problems. However today i noticed that breakpoints aren't getting hit. I have downgraded to version 132.0.2 and breakpoints work once again. I think this has something to do with debug sources, since the load process adds 2 sources, webpack containing uncompiled code and where i set break points, and webpack-internal which i think is built js library before getting minified. Links to exceptions in console also dont work instead of linking to webpack seemlesly, the adress says webpack-internal and link open a new window and complains that the adress is nonsense (see attached images)

Thatnks for the help

Yesterday I have updated tp macOS 15. Sine then I have trupuble displaying any webpages in Firefox 130. Th econnection just times out. Any other browser such as Brave, Safari, Home, Edge are still working as before teh update. How to fix this please?

Went into Firefox and got the error message: Platform version 131.03 is not compatible with min version>=131.02 & max version>=131.02 So I'm thinking that the last update caused the error. I did a system restore to a week earlier, and after 5 hours, the computer rebooted to that date. Upon opening Firefox, I found the the notice that the next time Firefox opens, it will update. After closing, and reopening, Firefox updated and displayed the same error message. Nor quite sure what to do, I downloaded Firefox again, and was going to uninstall and reinstall. But as soon as the download finished, it loaded. So now I have the new Firefox without all of my saved bookmarks and passwords. I thought I'd read someplace that that wouldn't happen, and all of my password and bookmark history would transfer to the new Firefox. As if that wasn't enough to ruin my day, I found that the new Firefox isn't working in my wife's account on the same computer. She gets the same error message as I did before the new install. I know, my fault for not backing up the bookmark and password files, but what's my option now?

I cannot use Firefox or Thunderbird I keep getting an error code: PR_CONNECT_RESET_ERROR The problem started straight after the latest update a few days ago.

I have cleared the cache and cookies I turned off the addons and extensions I shut down the internet security I changed the proxy settings to "no proxy" I even changed cert9 to ccert9 and had firefox generate a new cert9

Nothing has worked.

HELP!

I run a Synology DSM server on my local network. The website page to load locally inside my LAN is along the lines of 127.0.0.1:1001.

MacOSX 15.0.1 FireFox(FF) 132.0 (aarch64)

Previously accessing the DSM via the local IP address worked fine with no problems. Now, following one of the last couple of FF updates, I get an "unable to connect" message.

I also have a domain that routes to my local server and I can still access the DSM via the internet http address through FF. So I know that DSM is running fine and I have verified the settings within DSM.

I can load the DSM via the local IP in both Safari and Chrome. Only FF says it's unable to connect. So that shows that my DSM settings are fine and the page is available and loads in Safari and Chrome via the local IP.

I searched the forum and found similar postings, but not quite the same issue as mine. I deleted the cache & cookies/site data. I ensured the Proxy mode in FF is set to "No Proxy". I do not have any extensions running or themes.

I am at a complete loss at what setting in FF I need to change to restore this functionality.

Thanks, Matt

I only opened 5 pages (fixed tabs), and only enabled two plug-ins, Proxy SwitchyOmega and AdGuard AdBlocker. The browser was always open, and the pages were static, and nothing was playing. The strange thing is that it didn't take up much memory at the beginning, but it took up more and more memory over time. Today the system got stuck and couldn't respond (it might be that the system used virtual memory).

I used the browser's task manager, which showed that the Shared Web Process memory of several pages was very high, some as high as 4G, and the GPU memory was also higher than before.

I think this is very strange. Why does the memory usage increase exponentially after the webpage has been there for a while?

My settings and usage habits have basically not changed. I didn't have this problem before, but it has appeared in the past six months. I have updated many versions, but the problem still exists. I have always used Firefox. If it continues like this, I will be very disappointed and have to make changes.

I get the server not found error on almost anything.

Hmm. We’re having trouble finding that site. We can’t connect to the server at [literally almost any site] If you entered the right address, you can:

   Try again later
   Check your network connection
   Check that Firefox has permission to access the web (you might be connected but behind a firewall)

The site usually loads after I wait like 2-3 mins before reloading the site, or I force reload it around 7 times, but I cannot find a way to make the issue go away. I have refreshed Firefox, I have uninstalled and reinstalled it fresh, I have opened Firefox in Troubleshooting mode and the issue persists. I am at the end of my wits. Someone please give me something else to try.

So I can open up Youtube no problem, scroll around and even hover over a video for the preview. However the moment I click on a video the tab will crash. I check if this was the case for other video streaming sites. HBO Max has the same issue while Amazon prime doesn't crash however has a message saying there is a problem with the video player. Now I checked if videos can work on another browser (Microsoft Edge), and there are no issues. I have cleared the cache, disabled extensions, checked for updates [update to date: 132.0.1 (64-bit)], restarted Firefox from troubleshooting mode, enabled autoplay, checked if videos work in private mode, updated my graphics card driver, and even checked if Firefox's volume is muted (its not).

Crash ID: 145d84d4-c11c-41a8-9534-e00ff0241105 Signature: [@ std::basic_string<T>::_Construct ]

https://crash-stats.mozilla.org/report/index/145d84d4-c11c-41a8-9534-e00ff0241105#tab-debug

Since the recent update to Firefox 131, I can no longer use the Billpay option of my TD Bank account. I am able to log into my account without any problems and use all of the options except for Billpay. I want to add that I know I am not alone with this problem as I have seen several others with the same problem but with different banks. It is the Billpay option which no longer works.

As I said, the bank site is fine until I click on "Billpay", Then I get this: begin quote: "Why can't I access Bill Pay?

You might have cookies blocked or cross-site tracking prevented. Depending on what browser you're using, check your settings for these terms:

   Block third party cookies
   Cookie tracking
   Cross-site tracking

Make sure cookies are not blocked and cross-site tracking is enabled. Follow any additional instructions in your browser once you have adjusted these settings.

Copyright © 2024, TD Bank, N. A.. All rights reserved." end quote.

I have disabled uBlock Origin, Enhanced Tracking, tried Private Mode, Troubleshooting Mode to no avail.

I have also cleared cookies & data. This appears specific to v131. Any suggestions??

My system memory is reading at 57% right now in task manager, that the vast majority of that is being used by Firefox.

Why?

Normally, this would be called a flaw in the program, not the user, as all I have done in regards to settings is "keep tabs previous open when re-opening Firefox" and "Do not automatically update" because Firefox took it upon itself to not re-open my previous tabs on the last update.

Why is this program eating up all of that memory? I have "Firefox (15)" in Task manager under "Apps" and then 13 more instances of Firefox in "Backround Processes"

Wtf?

Regarding the current state of Firefox and WebUSB, I have four thoughts:

1. Yes, Mozilla's concerns regarding the security risks are valid, but not insurmountable.
2. In my experience, this is the single W3C noncompliance that impedes my use of Firefox.
3. In my experience, an increasing number of companies/organizations are leveraging WebUSB, from core-functionality of end-user hardware to enterprise-level troubleshooting, configuration, and support.
4. If Mozilla permits the use of unsigned plugins for its Firefox Developer Edition because of the reasonable expectation that its users understand the risks, it stands to reason that the same could be said for WebUSB.

(There's no need to reply, really - this is only being publicly posted because there doesn't seem to be a way to do otherwise - I just wanted to go through the exercise of casting this message-in-a-bottle into the sea.)

Unable to use Firefox to access Youtube. Problem started either late last night or early this morning. Whether using a bookmark or entering "Youtube.com" manually, the browser window merely acts as if I'm not even connected to the internet before finally just giving up.

Have tried using both 115.17.0esr (64-bit) and 132.0.2 (aarch64) versions of Firefox (each using a different computer), but YouTube refuses to load.

By contrast, YouTube has absolutely no problem loading using other browsers, the site loads almost instantly.

I've been using Android/google messages on web (messages.google.com/web) for years with Firefox with no issues. Starting today, the page will show the logo for about 10-20 seconds, then loads a blank page. I've tried unpairing, restarting my computer and phone, and restarting firefox. Was there a new update or something that might explain this? Any other thoughts?

This is a recent problem. I used to watch Peacock on Firefox with my ad blocking extension. Now I cannot watch Peacock videos. The page My Stuff displays but once I click on a program or episode to watch, I get the error screen. (see words below) Even with no ad blocker, I get as far as an ad beginning, and then the error. I have already refreshed my browser. This did not help. I can watch Peacock on Edge. (PC windows 10)

ERROR MESSAGE: Something went wrong. Sorry, your system configuration is not compatible with Peacock. Please check the supported devices in our Help Center (6007).

Recently, I have not been able to upload a video to YouTube. When I try to upload it, the upload is stuck on 0%. I tried another browser, and it worked fine. This has not been a problem until. I have uploaded many videos. The last time was about a month ago. So, maybe there is some problem with an update. Does anyone else have this problem or know the solution?

After yesterday's update, I'm not able to access files in Google Drive using Firefox on Windows. They're greyed out, and when I try to open one, a pop up informs me "This file can't be opened because you're offline." I'm certainly online, and it works on Chrome (ugh). Anyone else experiencing this?

Good Afternoon,

I bought a guitar course from this web site, https://masterclass.davidleviguitar.com/users/sign_in, and whilst the page opens up, when I click on any part of it nothing happens.

I then downloaded Chrome and everything works perfectly.

Can you please tell me how to get this site working properly on my computer, as I don't want Chrome on my computer.

I thank you and look forward to hearing from you.

Kind regards.

Greg.

I'm having much difficulty in attaching a article I see to Facebook. Its possible the problem may be I'm not using the right instruction on the Firefox options when I right click the article I want to attach to Facebook. Some of those options are, Save link as, Copy link, when I right click for options. Can someone explain what is the right option to use? And, how do I proceed once I choose the correct option to make that attachment to a Facebook message I'm replying to? There are times a picture of the article will attach to the Facebook message, but the text that is associated with the attachment will not appear? Can someone please help? Thank you.