Showing questions tagged: Show all questions

Tab dragging stops working at random times

Sometimes drag functionality stops working. I can't grab a tab to move it to another position or to a new window. (Holding left click on the tab and moving the cursor doe… (read more)

Sometimes drag functionality stops working. I can't grab a tab to move it to another position or to a new window. (Holding left click on the tab and moving the cursor does nothing). Also, re-merging the tab with another firefox window stops working. (Dragging a tab to a firefox window from another firefox window doesn't merge them. It does nothing) I can right click on the tab and select Move to move it to a new window but dragging stops working. I have to close Firefox and start it again (sometimes twice), then dragging starts working again. This happens multiple times a day. I am on Linux Mint and the version is 126.0 (64-bit). This problematic behavior has only recently began.

Asked by tenkayr 4 hours ago

can we reduce disk usage?

Firefox uses about half a gig on my disk, that's: '~/.mozilla' and '~/.cache/mozilla' can that be reduced? Either some setting that limits disk use or even a manual del… (read more)

Firefox uses about half a gig on my disk, that's: '~/.mozilla' and '~/.cache/mozilla' can that be reduced? Either some setting that limits disk use or even a manual deletion of ancient stuff?

Asked by rayandrews 2 days ago

Last reply by rayandrews 1 day ago

Youtube CORS error for googlevideo.com site

when i wanna open a page on youtube, i got some errors like below in my console window: ``` Cross-Origin Request Blocked: The Same Origin Policy disallows reading the r… (read more)

when i wanna open a page on youtube, i got some errors like below in my console window:


``` Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at https://rr3---sn-p5qlsndd.googlevideo.com/videoplayback?expire=1716635853&ei=bXRRZsXhJonb6dsPr4S9gAo&ip=104.237.233.106&id=o-AAWbYs_c1wgN4MrU7OqKDoN_4E89qYQsMLYgu196ZLvi&source=youtube&requiressl=yes&xpc=EgVo2aDSNQ%3D%3D&mh=Wx&mm=31%2C26&mn=sn-a5msenle%2Csn-p5qlsndd&ms=au%2Conr&mv=u&mvi=4&pl=25&spc=UWF9f9R71vLfm1F-HqlKYmIsTmmQ76vISxWKiaa8DnBJ1RFYdP1uqbuRYDqk&svpuc=1&ns=nZ43uaQFzt5gq9VgUw-rDA0Q&sabr=1&rqh=1&mt=1716613539&fvip=3&keepalive=yes&c=WEB&smc=1&n=DtTlBfhfTkjbJA&sparams=expire%2Cei%2Cip%2Cid%2Csource%2Crequiressl%2Cxpc%2Cspc%2Csvpuc%2Cns%2Csabr%2Crqh&sig=AJfQdSswRQIgBpryxlELSlbPjito5Ju6_RfQzqVcw10u03ydIYI41lcCIQCgk-eJSUpHsjpfCC08Zif4lFJZY3GVMbfofGXPQsdZcw%3D%3D&lsparams=mh%2Cmm%2Cmn%2Cms%2Cmv%2Cmvi%2Cpl&lsig=AHWaYeowRgIhAPqP6gckt5GXH-fLEv5Cg2vcg7upBxPU4Doh2zshdgCNAiEAqrP-9k3ySo7QyYhqQCESvz0lC8laHox06_kyE8r-oYo%3D&cpn=RZMRM0hX5vjkksRu&cver=2.20240524.00.00&fallback_count=1&rn=27. (Reason: CORS request did not succeed). Status code: (null).


Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at https://rr4---sn-a5msenle.googlevideo.com/videoplayback?expire=1716635853&ei=bXRRZsXhJonb6dsPr4S9gAo&ip=104.237.233.106&id=o-AAWbYs_c1wgN4MrU7OqKDoN_4E89qYQsMLYgu196ZLvi&source=youtube&requiressl=yes&xpc=EgVo2aDSNQ%3D%3D&mh=Wx&mm=31%2C26&mn=sn-a5msenle%2Csn-p5qlsndd&ms=au%2Conr&mv=u&mvi=4&pl=25&spc=UWF9f9R71vLfm1F-HqlKYmIsTmmQ76vISxWKiaa8DnBJ1RFYdP1uqbuRYDqk&svpuc=1&ns=nZ43uaQFzt5gq9VgUw-rDA0Q&sabr=1&rqh=1&mt=1716613539&fvip=3&keepalive=yes&c=WEB&smc=1&n=DtTlBfhfTkjbJA&sparams=expire%2Cei%2Cip%2Cid%2Csource%2Crequiressl%2Cxpc%2Cspc%2Csvpuc%2Cns%2Csabr%2Crqh&sig=AJfQdSswRQIgBpryxlELSlbPjito5Ju6_RfQzqVcw10u03ydIYI41lcCIQCgk-eJSUpHsjpfCC08Zif4lFJZY3GVMbfofGXPQsdZcw%3D%3D&lsparams=mh%2Cmm%2Cmn%2Cms%2Cmv%2Cmvi%2Cpl&lsig=AHWaYeowRgIhAPqP6gckt5GXH-fLEv5Cg2vcg7upBxPU4Doh2zshdgCNAiEAqrP-9k3ySo7QyYhqQCESvz0lC8laHox06_kyE8r-oYo%3D&cpn=RZMRM0hX5vjkksRu&cver=2.20240524.00.00&rn=1. (Reason: CORS request did not succeed). Status code: (null). ```

Asked by alex 1 day ago

Last reply by alex 1 day ago

Firefox processes becoming zombies

I got this messages on the logs and sometimes the session freezes when I'm using Firefox: mai 24 20:12:16 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARN… (read more)

I got this messages on the logs and sometimes the session freezes when I'm using Firefox: mai 24 20:12:16 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARNING: process 50331 is a zombie: file /builds/worker/checkouts/gecko/ipc/chromium/src/base/process_util_posix.cc:245 mai 24 20:12:16 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARNING: process 50253 is a zombie: file /builds/worker/checkouts/gecko/ipc/chromium/src/base/process_util_posix.cc:245 mai 24 20:12:34 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARNING: process 52142 is a zombie: file /builds/worker/checkouts/gecko/ipc/chromium/src/base/process_util_posix.cc:245 mai 24 20:13:28 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARNING: process 51884 is a zombie: file /builds/worker/checkouts/gecko/ipc/chromium/src/base/process_util_posix.cc:245 mai 24 20:14:07 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARNING: process 52087 is a zombie: file /builds/worker/checkouts/gecko/ipc/chromium/src/base/process_util_posix.cc:245 mai 24 20:14:13 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARNING: process 50755 is a zombie: file /builds/worker/checkouts/gecko/ipc/chromium/src/base/process_util_posix.cc:245 mai 24 20:14:19 glados firefox.desktop[9642]: [Parent 9642, IPC I/O Parent] WARNING: process 50806 is a zombie: file /builds/worker/checkouts/gecko/ipc/chromium/src/base/process_util_posix.cc:245 lines 8174-8233/8233 (END)

Asked by marcoshalano 2 days ago

After resume from suspend graphics are broken (Linux, Nvidia)

This has been a problem for a while, currently on Firefox 126.0 and Nvidia 550.78. I can work around the problem by forcing webrender to use software mode. When using HW… (read more)

This has been a problem for a while, currently on Firefox 126.0 and Nvidia 550.78. I can work around the problem by forcing webrender to use software mode.

When using HW accelerated webrender with my Nvidia graphics card everything works fine until the PC wakes from sleep, then graphics are broken and Firefox needs restarting. Most noticeable for me is when looking at Grafana graphs they will look like random lines, and my Frigate NVR snapshots only display some of the time.

Is there anywhere in Firefox that will show a log of any error messages to do with the graphics card? I would like to try and fix the problem rather than disabling HW acceleration, but with no logs to look at that is impossible. No other programs seem to have a problem with resuming from sleep, and no error messages are shown in any of the system logs.

Asked by Adam 1 week ago

Last reply by Adam 3 days ago

can't access product site promoted by google due to googleadservices 'unable to connect'

Tell me why google says this: Unable to connect An error occurred during a connection to www.googleadservices.com. The site could be temporarily unavailable or too … (read more)

Tell me why google says this:

Unable to connect

An error occurred during a connection to www.googleadservices.com.

   The site could be temporarily unavailable or too busy. Try again in a few moments.
   If you are unable to load any pages, check your computer’s network connection.
   If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web.

when I click on an advert for a product provided (I assume) by google at the top of search results. I have cleared the cache and cookies. Latest firefox on ubuntu 22.

Asked by geoff07 3 days ago

Cannot drag tab to detach it from the current window

After updating to the current version of my OS(listed below) I can no longer drag a tab to detach it from the firefox window. Doing so drags a preview of the tab, but it … (read more)

After updating to the current version of my OS(listed below) I can no longer drag a tab to detach it from the firefox window. Doing so drags a preview of the tab, but it is never separated from the current window. I can drag it to an already existing window to move tabs from one window to another, but not to create a new window from a single tab.

OS: Manjaro Linux 24.0.0 Wynsdey Linux kernel version: 6.6.30-2-MANJARO (64-bit) Desktop Environment: KDE Plasma 6.0.4 KDE Framework version: 6.1.0 QT Version: 6.7.0 Display Server: Wayland Firefox version: 125.0.3 (64-bit)

Asked by Erik H 3 days ago

How do I have site theming ignore OS/browser themes?

Firefox's website appearance settings include a setting to force a light theme, force a dark theme, or to have sites automatically adapt to the theme of the browser. I fe… (read more)

Firefox's website appearance settings include a setting to force a light theme, force a dark theme, or to have sites automatically adapt to the theme of the browser. I feel that's not exactly what I want. I don't want the browser's theme to have anything to do with themes of the sites I'm viewing, nor to force light or dark. I think I'd rather just use the site's default, or if not that, set a theme on the site itself. Is there any way for Firefox to just not meddle in a site's theming at all?

I kinda just don't want any connection between the theme of my operating system, the theme of my browser, or either of those and the theme of websites, and none to force a theme on any of the others. I'm not sure why that seems so desirable nowadays, but I don't want it.

Asked by Sterrence 4 days ago

Add shortcut button disappeared

I added my own shortcuts and deleted all the preset ones (Wikipedia, Twitter, Amazon etc). On deleting the last one of the default ones, the 'Add a shortcut' button has c… (read more)

I added my own shortcuts and deleted all the preset ones (Wikipedia, Twitter, Amazon etc). On deleting the last one of the default ones, the 'Add a shortcut' button has completely disappeared. Is there another way to create a shortcut?

Asked by Barbara D. 5 days ago

Last reply by Barbara D. 4 days ago

A reason I can't stop FF from trying to populate my home page shortcuts?

I can control the number of rows. I can control whether to accept sponsored shortcuts. (I have chosen *not to.) I can control whether I want 1 or more rows to reflect rec… (read more)

I can control the number of rows. I can control whether to accept sponsored shortcuts. (I have chosen *not to.) I can control whether I want 1 or more rows to reflect recent activity. (I have chosen *not to.)

Yet until I pin my own preference to *every shortcut, it seems I cannot stop FF from putting "suggestions" in the empty slots, based on nothing but a single web visit.

This is annoying.

Moreover, if I visit several different pages connected to the same site, FF will put them all into shortcuts, with the same icons.

This is possibly even more annoying.

I am coming from Brave. They don't do things like that, although there is obviously a reason I'm giving FF a look.

But I would recommend, heartily, a home page shortcut box in settings that one could click (and actually *mean* something), like: "Don't ever suggest or fill in any shortcuts for any reason. I will handle it, and I don't like correcting your mistaken ideas."

Asked by Yuki 4 days ago

Too many spawn child processess and browser freeze

Firefox spawn too many child processess, with cause the browser to freeze. Proposed solution: Reduce to absolute minimum the spawn child processess. The value should be… (read more)

Firefox spawn too many child processess, with cause the browser to freeze.

Proposed solution:

Reduce to absolute minimum the spawn child processess. The value should be set according to the device performance and additionally show allow the user to set manually the limits.

Example: 1 (maximal 3) child process per tab/window

Asked by Mcgiwer 5 days ago

proxy.pac file not loading on startup

Hi, I'm experiencing a problem on Firefox 125 and 126 on Red Hat Linux 8 & 9 and also on Ubuntu 20 and 22 systems. We have a proxy pac which we have tried loading f… (read more)

Hi,

I'm experiencing a problem on Firefox 125 and 126 on Red Hat Linux 8 & 9 and also on Ubuntu 20 and 22 systems.

We have a proxy pac which we have tried loading from an http url, or a local file and both produce the same result.

  • Launch Firefox, no access to Internet sites (i.e. no proxy)
  • Enter settings and Reload proxy pac
  • Proxy works perfectly

Is there any way to force the proxy pac to load on Launch? Why isn't this the default behaviour? or am I doing something wrong?

Thanks

Asked by andy270 5 days ago