Firefox Support Forum

The company I work for is behind a firewall. Our systems running firefox are unable to send crash reports because of the secure nature of the systems. Is there a way I can send the crash report files that I pull from the "Pending" directory and send them to Mozilla manually? FF version snap Mozilla Firefox 103.0.1 Ubuntu 22.04.3

I keep getting a popup about using an older version and creating a new profile. I already created a new profile a few days ago so I cannot keep creating new profiles every time firefox deploys a new version and would need to open firefox to update the browser version.

Have used Firefox for decades and suddenly it is having problems. If I surf around and have a few tabs open, some of them might crash. Firefox tries to restore them and sometimes it works and sometimes they just crash again immediately. I can go to Amazon and the page won't load completely so I can't do anything. If I try and close Firefox it won't close, it is frozen. And often, pages just load very slowly even though my internet connection is strong. This just started about a month or so ago. I have refreshed Firefox, updated it, and checked the systems on my computer. All my internal diagnostics returned "no issues." So it has to be the program.

When I reboot a Windows 10 computer and click once on the Firefox icon on the Taskbar, (1.) Firefox does not open full screen although when closed it was full screen. (2.) A second Firefox window opens with Yahoo on a Tab and also not full screen. Please fix!

I woke up this morning to my home directory having been remounted as read-only (it has its own dedicated hard drive at /dev/sdd1). I ran e2fsck and things looked good, so I restarted and things were fine again.

However, whenever I open Firefox, it hangs for about 1 full minute before it goes haywire and renders the entire system essentially unusable since being able to access my home directory is vital. The following is visible in dmesg:

[ 2710.362946] Aborting journal on device sdd1-8. [ 2710.363000] EXT4-fs warning (device sdd1): ext4_end_bio:343: I/O error 5 writing to inode 10520593 starting block 44134769) [ 2710.363008] Buffer I/O error on device sdd1, logical block 44134513 [ 2710.363041] EXT4-fs error (device sdd1): ext4_journal_check_start:84: comm glean.dispatche: Detected aborted journal [ 2710.363048] EXT4-fs warning (device sdd1): ext4_dx_find_entry:1795: inode #9718667: lblock 2: comm Renderer: error -5 reading directory block [ 2710.363076] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1082: inode #9701223: lblock 1: comm Cache2 I/O: error -5 reading directory block [ 2710.800016] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9976467: comm BgIOThr~ool #12: No space for directory leaf checksum. Please run e2fsck -D. [ 2710.812447] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9976467: comm Backgro~Pool #1: No space for directory leaf checksum. Please run e2fsck -D. [ 2710.884557] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9976467: comm Backgro~Pool #1: No space for directory leaf checksum. Please run e2fsck -D. [ 2710.980923] EXT4-fs (sdd1): Remounting filesystem read-only [ 2711.049635] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9701223: comm Cache2 I/O: No space for directory leaf checksum. Please run e2fsck -D. [ 2711.152739] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9701223: comm Cache2 I/O: No space for directory leaf checksum. Please run e2fsck -D. [ 2711.152757] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9701223: comm Cache2 I/O: No space for directory leaf checksum. Please run e2fsck -D.

All other programs that I use daily do not cause this issue. No clue what to do here. LibreWolf works fine - that's what I'm using now that Firefox breaks everything and basically forces me to restart if I want to use my computer normally.

Figma and Google maps are rendering as black screens. I can see control panels, but not content. This has been the case for about a week now. I have tried switching from dark/light modes.

Hello! Since as of last update to 127.0 (64-bit, ARM-version) Firefox looks like the attatched photos. White spaces all over which makes Firefox impossible to use. This only occurs on my Surface pro X though so a problem with the ARM-version?

So far I've tried switching to light theme, a refresh, deleting the entire Mozilla folder in APPDATA and a reinstall (using Revo uninstaller first) of Firefox but it still looks the same...

Is there anything more I can try or is this just my life now?

Regards, // Richard

Hi all,

Currently woking on a Client project and implementing Coveo search engine in Salesforce. However, it looks like Firefox is blocking Coveo and the search is not working at all.

Anyone can help or recommend anything?

Thanks!

I have streamed TennisTV in the past no problem but now it stutters and task manager shows CPU 100%. It also shows Firefox running 2 processes which consume CPU and accounts for the 100%. So I closed one of the processes (the one using least memory) and it solved the problem. So how can I stop this second process from starting, it seems to consume CPU without actually doing anything?

When I try to login to my Social Security account after pulling up the Soc Sec site (ssa.gov), I get this message:

"Bad Request Your browser sent a request that this server could not understand. Size of a request header field exceeds server limit."

I tried waiting a couple of days and attempting a login again. I also tried turning off my VPN, using a new tab, refreshing the site and restarting my laptop. I do not get this message when I use Safari to login, but I want to use Firefox.

Thanks for your help in fixing this problem.

This pops up every few hours. Sometimes it pops up invisible but steals focus from the main window. How can this be disabled?

I tried all methods that have been mentioned everywhere on the Internet, including policy.json, Group Policy on Windows, etc. Nothing disables this nagging yet.

Hi. I feel like this problem has only shown up in the last couple months but for some reason, on firefox, when say watching something on youtube and I go to pause or skip around in the video I'll get this very unpleasant distorted digital noise sound very briefly. I've tried turning off and back on hardware acceleration and some other things but no dice. I can hear the distortion on my onboard sound, my usb headset, and hdmi audio through the graphics card so I don't think its my hardware. This distortion also doesn't happen with say MPC/VLC or watching Youtube via Edge or Chrome.

After one of the updates a few months ago, I have started to have trouble with firefox. After a while if I try to open a new tab and type in a link, the tab will try to load forever and I will not be able to open any more as doing another tab and typing a new link will have the same problem. I found that at first I could close the browser and reopen it to have the tab fully load and refresh whatever was already open, but after a bit that started to have an issue too. Most times now if I shut down and relaunch firefox within a few minutes the browser will open with all of the tabs open but they are all blank, with no links filled in, pages loaded, or anything. If I close and reopen after that then it only opens with a "new tab" page and everything that was open is lost. None of the more recent updates for firefox have seemed to fix this issue.

Thank you.

Versions: Firefox: 127.0 (64-bit) Linux: Ubuntu 22.04.4 LTS

Description: After some time, and (under unknown conditions), the input delay will shoot way up. Like 20-30 seconds.

Strangely enough, this only applies to keyboard inputs. I can change my tab with my mouse, I can click on things, no issues there. But any keyboard interaction is hugely delayed.

This does not fix itself until I close my browser and restart it. Closing the browser is always broken here too, if I close the browser with the [X] exit button, I then need to kill the process because it just hangs. It blanks out the contents of each tab like it's preparing to close them, but it just doesn't ever complete the task without a manual kill.

CPU usage and memory usage are relatively low; significantly below my system's limits.

I've already tried this suggested fix, to no avail.

The frequency of this is only about once a week at most, usually once a month, so it's not a huge issue, but I'm just worried about this occurring during a critical meeting or something later. Having this impending restart needed is kind of worrying for critical usage times.

I'm working on developing a website that uses WebGL in it, but sometimes some bad code will cause WebGL to crash. The issue here is that once that happens, I have to go into troubleshooting mode and back out before it starts working again. Is there any way to make it so that WebGL works after it crashes?

I have 2 soundcards on my iMac, (OS Ventura 13.6.1) : one internal (iMac) and one for music production. (universal audio)

Until the latest update (127), I could select either one and I could hear the audio from Firefox. But... since the update, only the internal iMac audio card is working. Note that I don't have this problem with Safari nor Chrome and it used to work on Firefox until the last update.

Anyone has noticed that? 

Does anyone knows how to contact them and log this as a new bug?

Thanks all!  :)

For a few months now, I have been having issues with Firefox and my computer audio. If I am listening to something, like internet radio (doesn't matter which website), the audio will completely cut out. Sometimes it will start working on its own and other times I either have to force quite Firefox or completely restart my computer. When this happens, no other audio works on my computer. I have had a new motherboard, audio card, speakers all replaced under warranty. I've also re-installed Windows and it still keeps happening. Has anyone else experienced this? Can anyone recommend a solution?

Issue Summary: When using a maximized Firefox window with the Windows taskbar set to automatically hide, the taskbar sometimes fails to appear when moving the mouse cursor to the bottom of the screen.

Steps to Reproduce:

• Set the Windows taskbar to automatically hide.
• Maximize the Firefox window.
• Use Firefox normally and intermittently move the mouse cursor to the bottom of the screen.

Expected Behavior: The Windows taskbar should appear when the mouse cursor is moved to the bottom of the screen.

Actual Behavior: The taskbar does not appear consistently when the mouse cursor is moved to the bottom of the screen. This issue is specific to Firefox and occurs frequently, though not every time. The taskbar functions normally with other applications.

System Information:

• Windows Version: Windows 10 Pro 22H2 x64
• Firefox Version: Firefox 127.0 (but happens at least since 126.0)

Additional Notes:

• The issue has been occurring for several weeks.
• No specific pattern has been identified regarding when the taskbar fails to appear.
• This issue significantly impacts the user experience as it disrupts workflow and navigation.

Steps Taken to Resolve:

• Checked for and installed the latest Firefox updates.
• Restarted Firefox and the computer.
• Verified that the taskbar behaves normally with other applications.

Request: Please investigate and address this issue in a future update. Any guidance or interim solutions would be greatly appreciated.

Thank you for your attention to this matter.